Question about Ricoh Aficio 3025P Black and White Copier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Ricoh Aficio 1018 photocopier
For the Aficio 1018. SC-320 is laser failure - the polygon mirror motor inside the laser has failed and needs replacing. You will need to contact your nearest service agent for repair.
For your RICOH Aficio 1013F - SC-551 is overheat in standby mode as far as I can tell. The circuitry that controls the fuser section ie manages the heat has problem. Unless its right near a source of heat like a heater or has no circulation around you machine you will need contact a repair agent for this machine also.
Posted on Mar 19, 2008
Its a charge corona cleaning error. Try turning the power off, wait 10 seconds and turn it back on.
If that doesn't reset it, it could be the pcu, toner collected on the mechanism.
If turning it off and back on isn't fixing it, you should get a technician to look at it to see what the trouble is.
Posted on Jun 19, 2008
SOURCE: Ricoh Aficio 2015
Pressure roller warm up error. Usually means that the fuser roller isn't at the right temperature when you turn the copier on.
Try turning the copier completely off. Wait 30 seconds. Turn it back on again and see if it goes away.
If not a technician should look at the fuser section to see what the problem is.
Posted on Jul 17, 2008
SOURCE: sc 481 on my ricoh aficio 1224
The problem (s) could be; defective main motor, image transfer belt out of position, belt mark blurred or absent.
A ITB belt inspection and/ or repair would be a job for tech.
Or you could just order a new PCU which would fix the problem.
Posted on Jan 08, 2009
You only got toner dust inside the LDU ***'y. 3 Screws and it comes off the laser unit, just blow it out with some air and it's fixed. No need to clean out the whole unit.
Posted on Jan 02, 2010
Tips for a great answer:
Oct 05, 2017 | Ricoh Office Equipment & Supplies
Feb 05, 2016 | Ricoh Office Equipment & Supplies
Dec 02, 2015 | Ricoh Aficio Office Equipment & Supplies
Apr 21, 2015 | Ricoh Aficio Mp-1600 Copier
Feb 01, 2012 | Ricoh Aficio 450 Copier
Jun 30, 2010 | Ricoh Aficio CL1000N Printer
Jun 14, 2010 | Ricoh Aficio 450 Copier
455 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: