Question about Garden

1 Answer

Is there a website to go to for an older model Wacker PT2a parts breakdown?

I need to know if there is a gasket or seal of some kind behind the front cover that comes off.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 316 Answers

Hello sir, Please provide the following information so that your issue may be diagnosed properly,what is it? brand name,complete model number The problem, What is happening with what? When it is happening? Are there times it does not happen? Did it just start happening? Did it ever work ? Did any seemingly unrelated event coincide with whatever it is not working? need the model number and brand name, if you need a manual i need the brand name and model number,if it is a riding mower the model number is under the seat.a snow blower the model number is on the rear of the machine, let me know,thank you. !!

Posted on Feb 18, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What would cause water to run out of the bottom fridge freezer

Some older models have a catch pan that needs to be emptied. It should be behind the grate on the bottom, on the front side. This just snaps off.

If it is a newer model it may have a bad door gasket and not making a good seal. You should feel some resistance when opening the doors if the seal is good.

Sep 25, 2014 | Kenmore Refrigerators

1 Answer

Want to know who makes the engine for Craftsman brush cutter #358795580. Sears does not have the gasket I need where can I get it #19115 I am in NY

Poulan probably made your engine, and it was probably made in Mexico. It says here that the part is non-returnable. If you want and have the old one intact, you can get a roll of normal gasket paper and trace and cut out your own. I make them all the time, and.....they don't leak. Auto parts stores sell the gasket paper and it is not expensive. Sears didn't say whether or not the gasket was in stock, just that it was not returnable. See number 25 on this diagram and parts list. Ebay is always selling Craftsman parts also.

Aug 13, 2011 | Craftsman 25cc Gas Line Trimmer

1 Answer

Manaul for Craftsman electric trimmer 358.783522. I went on the Sears Parts website and could not find the manual. Do you have any other suggestions on where to locate it? The Craftsman webiste was of...

I see the manual listed after part number 25 in this Sears Parts website. It is inexpensive and if you can view a complete parts breakdown of the unit here, maybe you won't even need to order a manual. Usually they are a free download. Here is your model:

Apr 13, 2011 | Craftsman Garden

1 Answer

Ford mondeo 1.8 td diesel, the problem is the power steering fluid is leaking, when i check it look like it was coming from the middle part of the can i fix it and what parts do i need to get...

Have a look at the power steering fluid cooler it is just in front of the radiator behind the front bumper. The coolers corrode and leak. Also the seals can go, check for fluid leaking out of the boots at the track rods. Try this procedure :--- 1)Trace the source of the leak. Use a mirror on an extended handle to follow the puddle of fluid on your garage floor to the power steering system. Look on the hoses and gaskets to find from where the fluid could be leaking. 2) Add power steering stop leak additive to your power steering fluid. Lucas Power Steering Stop Additive is 100 percent guaranteed to stop seal leaks. In older cars, the seals shrink, causing leaks. The stop leak makes the seals swell to their original size. 3) Use gasket sealant if the gaskets are old and leaking. Sealant, such as Permatex, is resistant to engine fluids, and will help repair a leaky gasket. 4) Replace the gasket, if the gasket sealant does not work. Thanks. you can rate this solution and show your appreciation.

May 19, 2010 | Ford LTD Cars & Trucks

1 Answer

The seal is ripped and i need to replace it --the model is 110.4751

The part number for the bellow (name for the front seal) is W10189283 it should run about $40.00. It is held on by a spring ring in the front and a screw clamp from the bellow to tub connection. Here is a link to a parts breakdown picture that should help. The bellow is part #1 in this image.

Apr 20, 2010 | Kenmore 44102 Front Load Washer

1 Answer

Need the part # for the door seal for a GE front loader washing machine,model wbvh6240hww

The part number for the model you have listed is WH08X10036. I found your washer listed at, with a complete illustrated parts breakdown. Other sites you may try are:

NOTE: For your search criteria enter your model number a "WBVH6240H0WW".

I found the gasket listed at and for the best prices.

If you have any questions, please post back and let me know. I hope this helps you.

Mar 05, 2010 | General Electric WBVH6240HWW Front Load...

2 Answers

How do i repair the gasket behind the crank shaft seal?I have a major oil leak and i was told my gasket behind the crank shaft in the front needs to be changed. I have nearly no experience on vehicles so...

Front crank seal. First you have to have room to work, so this may require you remove the radiator and some plastics. Remove the serpentine belt,remove the bolt in the center of the crank pully. The pully should slide off with some resistance but not enough to need a puller. Once the pully is off, there's your sea. Pop the seal out with a screwdriver. Clean the surface of the hole where the seal was, Put some sealer,on the outer perimeter of the new seal and some grease on the seal lips. Evenly tap the new seal into place with the spring side of the seal facing in. make sure seal is at the point the old seal was. Now take the pully and clean the surface the seal rides on, very clean and nd coat with a thin coating of grease. Slide the pully back on and secure with bolt. Then belt, then radiator. Any trouble, holler. Good Luck, Ned

Oct 17, 2009 | 1994 Dodge Caravan

1 Answer

I just replaced the motor bearing and after putting the whole thing together the water is pouring out of the front

Replace the mechaical seal and volute o-ring. Parts are available locally or try our website at

Use the contact button and include your pump model number to receive a parts breakdown and pricing.

Jul 03, 2009 | Polaris Pb4 - 60 Booster Pump

1 Answer

Changing the front transmission seal on my 93 geo prizm what kind of seals and gaskets will i need

only one seal but since your at it change both the front and rear when you purchase them they at the parts store can tell you also if auto change the trans gasket and the filter and replace with new fluids again parts store will help you i suggest auto zone if your not from the states order it from america auto zone should have a website also the are very friendly and helpful and will guarantee your purchase

Jun 08, 2009 | 1993 Geo Prizm

Not finding what you are looking for?
Garden Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers


Level 3 Expert

708 Answers

john h

Level 3 Expert

14309 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides