Question about Televison & Video

1 Answer

My tv the bolbs have moved out of place - Televison & Video

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I am assuming you mean bulbs. Typically the bulbs do not just move out of place on there own. Did the tv take a sharp impact or did some one hit the tv hard enough to move it. The bulbs are held in place with plastic sleeves that are typically held in place with 6 to 10 screws depending on the model. Your local repair shop may be able to assist you in renting the allignment tools for your bulbs. Typically the convergence chip goes and it gives the TV the appearance of the bulbs slipping and makes the tv look like the colors have seperated. One of the colors seems to have shifted to one side and doesn't line up with the rest of the picture. So check with your local dealer or write to the company and see ig your convergence chip is available and if you can rent the allignment tool.

Posted on Oct 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sony Wega KP-FX432M91 Prjection TV. I am moving house and I want to know if I can lay the TV flat on it's back to move as it's too tall to stand upright in our vehicle


Hi,
Please do not lay tv on its back because of its internal design, things are mounted inside vertically and screws are holding them in place. Laying tv on back will put force on screws that might came off or get loose and you will end up with a distorted picture on tv screen.
Move tv in stand upright position, it is safe.
Hope this will help.
Thanks.

Mar 25, 2011 | Sony KP-FX532M91 TV

1 Answer

I have a 65H84 model TV and plan on moving it to a different room. This TV was in place when we bought the house from previous owners. Does the unit come a part in two sections for easier moving? Thank...


No,this thing come in as a whole tv unit,dosen't come aparts.U check the tv,see if it work,before going all the troubles moving it to another room.These DLP tvs design are notorious for it tv convergence problems and DM power supply board intermittently shutdowns alots.It bulky design and not work for free DTV over the air.

Feb 08, 2011 | Toshiba 65H84 65" Rear Projection HDTV

1 Answer

Tv screen has little white dots at bottom of screen tryed cleaning both sides of screen mirror in back of tv and bolb lens any other ideas?


Your DLP chip is going bad.
This is a known problems with these set.
It is an involved process to change it out; I suggest a repairman.
However, if you are handy you can try to do it yourself ; just be careful when removing the DMD board.
The part costs about $200.

Feb 08, 2011 | Samsung HLS4266 TV

1 Answer

Sound is ok but no't picture


Try calling Encompass Elect. at
1-800-638-3328

Jun 25, 2009 | GE D52GW12 52" Rear Projection HDTV-Ready...

1 Answer

Double images and no owners manual


First try going into the customer menu of the TV. Look for the convergence alignment parameter and see if you can move the images back into place.

If you can't move the images back together, this is a failure of the convergence circuit in the TV. The convergence output ICs will need replacement and the TV should then be re-aligned. Look for a service center that is factory authorized. Expect to spend $350-$500 to have this issue resolved.

michtech

Feb 14, 2009 | Zenith R57W46 57" Rear Projection...

1 Answer

No Sound, No Picture


loose connection inside i would check the convergence amp area.
Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Sony Convergence
http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/
http://www.techlore.com/article/19631/Sony-Convergence-Procedure/

Sep 23, 2007 | Hitachi 51SWX20B 51" Rear Projection...

1 Answer

Hitachi 53sbx10b


Try the auto convergence feature of the TV. Press the button on the front of the tv and wait about 5 minutes....

Apr 27, 2007 | Hitachi 53SBX01B 53" Rear Projection...

1 Answer

Recently moved the tv


The possibilities are that either you have a bad connections somwhere causing a shutdown or a board has a crack in it that happened from moving it.

Feb 25, 2007 | RCA P61927 61" Rear Projection Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6355 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...