- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check to make sure the type of SD. card matches what the maufacturer calls for. Also the SD card may need to be formatted before you can record to it. Check your intruction manual to find out how to format the card. One last thing to check is if the SD card is locked. Usually on one of the corners there is a sliding tab used to protect and unprotect against recording over any material that may be on the card. Hope this helps.
i think it is because of your SD card that is on "record protected" position...
just change it to non protected by moving the tiny lock on the left side it must be up, not down (that arrives sometime when inserting the SD card in the cam, if not really straight !
It's not the camera, it's the memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
Hey mkafirebird, I don't have a good answer for you other than perhaps a ribbon cable could've come loose? Polaroid is definitely not helping with this camera since they've discontinued this model(more like disowned it). My lcd was cracked, and I wanted to replace it, but there aren't any replacement parts out there according to Polaroid...
SD cards have a small slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.
The simplest solution is to buy a cheap SD card reader and connect it to your computer. Then put the SD memory card from the camera in the reader. Windows XP will open a dialogue window asking you what you want to do with the pictures.
The caa-03040s has a relatively slow USB connection. Get a USB 2.0 card reader and connect it to a USB 2.0 port on the computer for much faster download speeds than the camera is capable of.