Question about Canon PIXMA MP180 All-In-One InkJet Printer
Hola amigos, si no han podido resolver el problema E05 y tienen instalado el sistema de tinta continua aqui les dejo la solucion
Posted on May 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: error E 4, 2 canon pixma mp 160
E42 means scanner error. May require a hard reset(disconnect from power supply for 30 min). Otherwise may require factory reset procedure to be applied. Follow the steps below:
Mp160 Reset Counter
Service mode operation procedures -
1) With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order),
the printer will move into a service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s)
according to the function listed in the table below.
(Each time the Stop/Reset button is pressed,
the LED lights alternately in orange and green, starting with orange.)
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset procedures below.
5 times Orange Destination setting See Destination setting procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
Posted on Jul 09, 2008
SOURCE: ERROR 5100 CANON PIXMA
Remove the error code 5100 1. Turn off printer. 2. retaining button Stop/Reset (red triangle in the circle) press button POWER - indicator it will light up with green color. 3. let go button Stop/Reset, continuing to hold POWER. 4. press button Stop/Reset 2 times, while holding POWER button, after which you will let go all buttons. 5. when indicator is lit BY Solid GREEN - press Stop/Reset 4 times! (this is the key) 6.turn off printer by POWER button, then turn on. 7. You should be set. If it didn't work, try it again, slowly. It WILL work!
Hope this helps, if so do appreciate my effort by rating the solution Good Luck, Cmptrlink
Posted on Dec 31, 2010
I found you a site where you can download the latest drivers to install at the link below Good Luck
http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=All-in-One Printers&series=All-in-One Printers&model=PIXMA MP250&menu=Download
Posted on Dec 27, 2009
Tips for a great answer:
Jul 11, 2017 | Cannon Office Equipment & Supplies
Jul 30, 2014 | Canon Black Pixma Mp 280 High Quality...
May 29, 2014 | Canon MP280 All-In-One InkJet Printer
Jul 04, 2012 | Canon Office Equipment & Supplies
May 19, 2012 | Canon PIXMA MP180 All-In-One InkJet...
Apr 30, 2012 | Canon PIXMA Office Equipment & Supplies
Apr 15, 2012 | Office Equipment & Supplies
May 02, 2009 | Office Equipment & Supplies
Aug 20, 2016 | Canon PIXMA MP180 All-In-One InkJet...
Apr 23, 2014 | Canon PIXMA MP180 All-In-One InkJet...
5,812 people viewed this question
Usually answered in minutes!