My sleep timer button does not work at all. It's the only button on the whole remote that does not work, but it's the one I would use the most. Does anyone know if maybe I'm using the wrong code or something... or do I just have a faulty remote?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press and hold the SLEEP key for three seconds. The illuminated component name turns on.
Release the SLEEP key.
Using the number keys, enter the desired time in minutes (from 1-99
minutes). To set the timer to an umber under 10 minutes, first press 0
and then the desired number (e.g.,05 for five minutes). The illuminated
component name blinks with each key press.
Once the second number is entered,the illuminated component name turns off. Tip Any key press
other than the number keys is ignored. If you don't enter the sleep
time within 10 seconds after pressing the SLEEP key, you must start over
at step 1. The illuminated component name blinks four times and then
turns off, indicating your attempt to program the Sleep Timer has been
The Sleep Timer is now set.
Leave remote aimed at the TV. Once the Sleep Timer is set, you can
continue to use the remote without affecting the Sleep Timer. However,
because the timing mechanism for the Sleep Timer is built into the
remote itself, the remote must be in TV Mode and pointed at the TV to
activate the Sleep Timer. Note: If the ON·OFF key is pressed, the Sleep Timer is canceled.
Usually you check for the sleep button on your remote controller. Press the button and the sleep function comes on. Pressing it again adds about 5 to 10 minutes to your time for the sleep function to come into effect. After the time has gotten to its highest the cycle goes off and satrts again. Hope this solution has been helpful?
Step 1: Press and hold the "SLEEP" key, then release. The indicator light will stay lit. Step 2: Enter time in minutes using the numerical keypad (from 1 minute to 99 minutes). For 1 to 9 minutes press 0 before the actual number. The indicator light will go off. Leave the remote aimed at the TV set. The Sleep timer program can be cancelled (reset to zero) by pressing and holding the "SLEEP" button until the INDICATOR LIGHT blinks or by pressing the ON/OFF button.