9531 sander manual

Question edited for clarity.
Question moved to correct category.

Not many spares are listed

https://www.google.com/search?q=WEN+7%22+2+SPEED+SANDER+MODEL+943+parts

Try the maker direct.

Parts - WEN Products

https://wenproducts.com > collections > parts
8.5-inch Sanding Pad for WEN 6369 Part Number: 6369-003 Compatible with the following Model: WEN 6369 Variable Speed 5-Amp Drywall Sander .

if it sparks a lot at the brushes , then there is an armature or winding fault
sanders are cheap so junk it and upgrade

there is a wrench supplied with the tool that you need to insert in the slot on the clamp and push the wrench towards the tool to open the clamp. Now if you follow closely I can direct you to a manual and parts list. Go to "dewaltservicenet.com" and scroll down to the bottom and you will find a porter cable link, click on that and then when you get to the next page click on tools. Scroll down till you find sanders and click on that. Next find finishing sanders and you will find your model sander click on the description and it will again redirect you to another page where you can find the manual. The whole manual is 44 pages long but that includes other languages. The page that you specifically need is page 10. If you have a problem let me know and I will try and help. This is the first time that I have had to take this route to find a manual on their site.

There is a belt adjustment know on the side of the sander. Turn the adjustment know back and forth while the sander is running until it centers itself.

this is easy done, just follow the steps:

1. disconnect the power cord
2. turn polisher pad up
3, grip firmly randomiser in one hand (that is this bulky bit between pad and polisher)
4. grip pad and rotate it against arrow direction.

if you just need to change the abrasive, these are on hook and loop and you just lift it from the pad and replace with new one.

this action will separate pad from randomiser, if you need to remove randomiser as well, you will need spanner of appriopriate size or adjustable.

you have manual available for download on this site:

http://powertool.manualsonline.com/manuals/mfg/portercable/7335_7336_7336sp_7355_7366_7424.html

if you find my advice useful, please do not hesitate to leave a comment and vote4 for me, thanx!

Black & Decker Mouse Sander Manual that can be downloaded

The best way to sand drywall is to use a pole sander (manually). You can pick them up for about $20.

This particular machine tends to leave grooves in the drywall compound if you are not familiar with how to use it.

If you should have any questions about "Drywall Finishing/Patching", or know someone who does, put your questions to Category:"Tools- Building & Power- HAND TOOLS" at FixYa.com

Thanks,

Jim

There is a lever on the side of the unit, flip the lever and then slid the belt off.

It would take 6" pully w/ a 2.25" which would not fit on that machine, no room for the 6". Replace with the same RPM motor is the proper way, unless you simply want a slower speed sander, duh! You cannot change the motor rpm without a defenant power issue, if you change the rpm your sander will power out, sorry?

Here's a link to the online manual.
As far as that diagram....didn't you label the wires?
Take a look here, it may help you. circuit wiring , especially the paragraph that begins: "Knowing that electrically common points have zero voltage drop between them is a valuable troubleshooting principle." Also read about resistors. That speed control knob is one.
Hope that helps...

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread. If I've managed to answer your question or solve a problem, please take a moment to kindly rate this post....thanks!