Question about RCA TruFlat 27F520T 27" TV

1 Answer

Rca truflat when i trun on the power its turn off

Posted by on

  • bobby1174 Oct 24, 2008

    i take out the flyback and turn on the tv and it start up but when i put the flyback in its start on off so how to test the flyback

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

It needs resoldering , mine and a couple of other tv's were doing the same, resolder the tuner connections and the components that get hot

electech

Posted on Oct 23, 2008

  • 2 more comments 
  • jason Oct 23, 2008

    sorry you can't except that but thats whats happening , i fix these rca's and rca gave us a kit that just has better solder for the components that get hot and get bad connection , the tv needs resoldering

  • jason Oct 23, 2008

    i've got an rca 27v412t and it did the same thing , I resolder it and it only lasted almost 8 months and I had to resolder it again! again this is from bad solder and bad connection

  • jason Oct 23, 2008

    not getting any help? I wonder why

  • jason Oct 24, 2008

    you have to change the rating or I can't help anymore

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My rca 50 inch tv wouldnt turn oon


Could be an open internal fuse or power supply failure

Jan 14, 2017 | RCA Televison & Video

1 Answer

I have a 37`` lcd rca flat screen model rlc4033.problem - no picture but sound is working.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 13, 2017 | RCA Televison & Video

1 Answer

Rca touch screen constant flickering i cant get it past dogs on screen but even if the dogs are showing or rca logo it is still flickering colored lines how to fix thisis what i need to know


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jan 13, 2017 | RCA Televison & Video

1 Answer

Samsung plasma TV model #pn42b400p3dxza problem with no image. The TV has sound but no image. I've tried using other components on the TV like RCA jacks with a separate TV digital tuner. Thank you


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Check whether Va & Vs voltage come to the display panel, from the main power supply regulator board. If not, the SMPS board [power supply regulator board] is faulty.

Jan 08, 2017 | Samsung Televison & Video

1 Answer

Hello, The Original remote quit working, So I bought a RCA universal remote control RCR314WZ. I need the code for (DTA800B1 B1L) converter box. so the remote will control it


Some RCA universal remotes list STB codes but you can try using code search to find something that can handle some or all functions. If a search through all codes contained in the remote does not succeed, you may have to try a different universal remote. All universal remotes do not contain all possible codes.

Jan 07, 2017 | RCA Televison & Video

2 Answers

I have a rca model led65g55r120q tv flickers and no sound


Check all cables for loose connection, try another input for picture (DVD, BLu-Ray, etc). If none of the other inputs work then it's a panel problem (display) If one or more of the others work then it's a problem with either the tuner or the signal.

Jan 02, 2017 | RCA Televison & Video

3 Answers

I have an RCA model LED42C45RQ with a blank screen. I have audio, no back lights, but I can see a picture on the screen with the flashlight test. What do you recommend replacing? Thanks


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Dec 31, 2016 | RCA LED42C45RQ 42" LED TV 1920x1080, 60...

3 Answers

Where can I purchase the Audio Video Connection for my dvd player I want to hook it up to my TV but can't find the correct cable Thank you Sandy


For the COBY TF-DVD7500, the video is carried on a single RCA plug cable. You can make due with a composite video cable (with three RCA plugs on each end) or get an RCA cable. The audio output can either be digital audio (which uses a special coax cable) or a headphone connector (analog audio).I believe the headphone jack is a 3.5 mm connector. If you use a composite video cable to your TV, you can connect the red and white plugs to an adapter (3.5 mm M to 2 RCA F). Then the TV speakers will get the audio track; otherwise you can use the DVD player speakers or the digital audio out.

I hope this helps.

Cindy Wells

Jan 24, 2011 | Coby TF-DVD7500 Portable DVD Player with...

Not finding what you are looking for?
RCA TruFlat  27F520T 27" TV Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...