Question about Stanley Fatmax Xtreme Retractable Utility Knife

Open Question

Load a blade on Stanley box cutter

How do you load the blade.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Just purchased a Stanley FatMax 10-778 retractable

1. Make sure the side lock is unlocked.
2. Push the thumb tab all the way to the front of the blade handle.
3. Insert the blade in the opening, you may notice two notches on the top side of the blade.
4. Press the small blade release button as you slide the blade into the knife. You may have to jiggle up and down to get the two notches on the blade fully into the handle.

If properly inserted, the exposed area of the blade should look very close to an equilateral triangle.

make sure both notches of the blade are inside the handle. They notch into the thumb lever.

good luck

Posted on Apr 11, 2010

Testimonial: "Thanks so much!"

  • 75 Answers

SOURCE: STANLEY QUICK POINT BLADES...CAN'T FIGURE OUT HOW TO CHANGE.

There is a SLOT in the end of the knife. Simply insert the strip of new blages in to the slot and you are ready to go.

Good luck. :)

Posted on May 04, 2009

  • 313 Answers

SOURCE: How do you load a new blade?

At the back end of the knive (the curved end) press the black piece through the yellow rounded part and the yellow front and the black back will part, now slide the yellow part back to reviel the blade folder. Fit new blade then refit the yellow part on top of the black part and slide the yellow part foward to lock it back in.

Posted on Jul 31, 2010

  • 1 Answer

SOURCE: how to load blades on stanley #10-788

This knife is ****. To load... you have to push the slide all the way forward. Make sure the switch is set to unlock. PINCH THE BLADE WITH YOUR FINGERS AND WIGGLE IT INTO PLACE. Then you have to use every ounce of thumb power to relock the switch.

Once you are done, the blade will still come out in 9.9 / 10 times you cut something.

Posted on Jan 06, 2011

  • 81 Answers

SOURCE: Have a Stanley Fat MAx

there is a little black button on the end where the blade comes out. With the blade in the out position,push in the button and pull out the blade. With button pushed insert new blade or turn the old one around to use the other end.let go of the button and you are ready to go.

Posted on Jun 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change blade on the Stanley 10-788 box cutter utility knife


go to you tube there is a video that will help

Jan 26, 2014 | Hand Tools

1 Answer

How do i change the blade on the stanley box cutter fat max?


Push the blade out as far as it will go and hold in the button on the side while slideing blade in and out.

Apr 20, 2012 | Stanley Hand Tools

1 Answer

Have a Stanley Fat MAx utility knife and unable to open it to load the blade


there is a little black button on the end where the blade comes out. With the blade in the out position,push in the button and pull out the blade. With button pushed insert new blade or turn the old one around to use the other end.let go of the button and you are ready to go.

Jun 26, 2011 | Stanley Utility Knife

2 Answers

Loading instruction to change blade on Stanley FatMax box cutter


Hmmmmm.... that sounds really confusing.

Better yet... just watch this video! http://www.youtube.com/watch?v=B8Q1p-8jkyE

It's actually pretty easy! :)

May 03, 2011 | Stanley Utility Knife

1 Answer

How to load blades on stanley #10-788


This knife is ****. To load... you have to push the slide all the way forward. Make sure the switch is set to unlock. PINCH THE BLADE WITH YOUR FINGERS AND WIGGLE IT INTO PLACE. Then you have to use every ounce of thumb power to relock the switch.

Once you are done, the blade will still come out in 9.9 / 10 times you cut something.

Nov 08, 2010 | Stanley Utility Knife

1 Answer

How do you load a new blade?


At the back end of the knive (the curved end) press the black piece through the yellow rounded part and the yellow front and the black back will part, now slide the yellow part back to reviel the blade folder. Fit new blade then refit the yellow part on top of the black part and slide the yellow part foward to lock it back in.

Jul 31, 2010 | Stanley Utility Knife

1 Answer

How rare is a 120 block plane made by stanley USA NO STARS ON IT


these planes were made by stanley from 1876 till 1947, it is about 7 1/2" long and cutter is 1 5/8" wide, it is virtualy exactly same as stanley 110, but it has blade raiser installed.

most popular are models without star and these are valued at anything between $20 to $80, depending on the condition, if with original box, labels, they are about double the price.

6 star model, second most popular, is not exactly rare but value can be between about $50 to $250

5 star model, it is rare, if complete, its value is between $300 up to $800, it differs in that that it have raised front end knob receiver

original price was $1. and for another $1 you will receive dozen blades...

i hope this help you?

if you are satisfied with my answer, please do not hesitate to leave comment and give me your vote4, thanx!

Jul 30, 2010 | Bailey Stanley 12-920 - Block Plane

2 Answers

STANLEY QUICK POINT BLADES...CAN'T FIGURE OUT HOW TO CHANGE.


There is a SLOT in the end of the knife. Simply insert the strip of new blages in to the slot and you are ready to go.

Good luck. :)

Apr 25, 2009 | Stanley Hand Tools

1 Answer

Stanley knife blades fell down drum and under


Probably the best thing to do in this situation is to empty the washer out, then unplug it and turn the water off at the spigot.
Then invert the washer, leaning it back, so as to reach the blades under the drum.

Mar 04, 2009 | LG WFT1071TP Top Load Washer

Not finding what you are looking for?
Stanley Fatmax Xtreme Retractable Utility Knife Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Measuring Tools & Sensors Experts

Lawrence Oravetz

Level 3 Expert

9587 Answers

Vernon Taylor

Level 3 Expert

3194 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Stanley Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...