Question about Heating & Cooling

Open Question

How do i get a parts manual for a gmp 075-3 rev.b furnace

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 587 Answers

SOURCE: goodman furnace\ blower comes on,unasked

Sounds like the fan switch on the furnace is set to low. Turn power off to furnace, take door off of furnace look for a fan switch, it may be a fan - limit together. The limit settings should be approximately 160° to 200°, and the fan settings should be about 100° to 140° set it to 120° it it's already set there then you probably need to replace it.

Posted on Aug 23, 2009

  • 415 Answers

SOURCE: I have a 1991-93 Goodman GMP 075-4 furnace. The

Look at pressure switch and inspect the tubing for any water logging, crimps, or cracks. Also ensure there are no obstructions in the vent line.
Is the ignitor glowing at all? Did you test the voltage going to the ignitor?

I hope you find this information to be very helpful to you moving forward. :-)

Posted on May 10, 2010

  • 1 Answer

SOURCE: I have a Goodman GMP

I have the EXACT same problem. Cant find the filter and no manual came wit hthe furnace when I bought hte house!!! AGH!!

Posted on Dec 02, 2010

Therinnaiguy
  • 1420 Answers

SOURCE: we need to change the

Not an easy task! Take many pictures as well as draw out and mark which wire went where. You will have to remove everything from inside the cabinet to get to the heat exchanger. It may be easier to replace the furnace. If you are paying a professional to do the exchange, figure three hours if they have done it before, if not figure 5 to 6.

Posted on Apr 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Janitrol gas furnace gmp 075-3 ,ignitor lites but pilot nor heat will go on


Check out pressure switch , check hoses are tight and not split , check air filter is clean jump out pressure switch and see iif it lights .

Jan 10, 2013 | Heating & Cooling

1 Answer

We need to change the heat exchanger for my Goodman Heat Furnace model no.-GMP 075-3


Not an easy task! Take many pictures as well as draw out and mark which wire went where. You will have to remove everything from inside the cabinet to get to the heat exchanger. It may be easier to replace the furnace. If you are paying a professional to do the exchange, figure three hours if they have done it before, if not figure 5 to 6.

Apr 02, 2011 | Goodman Heating & Cooling

1 Answer

I have a Goodman GMP 075-3 Rev B and cannot find the filter to replace it can you tell me where it is


I have the EXACT same problem. Cant find the filter and no manual came wit hthe furnace when I bought hte house!!! AGH!!

Nov 08, 2010 | Goodman GMS90703BXA Heater

1 Answer

I have a 1991-93 Goodman GMP 075-4 furnace. The other night I adjusted the temp to have it kick on, everything sounded okay, it never lit. I have checked the ingniter, it has continuity. WHat else should I...


Look at pressure switch and inspect the tubing for any water logging, crimps, or cracks. Also ensure there are no obstructions in the vent line.
Is the ignitor glowing at all? Did you test the voltage going to the ignitor?

I hope you find this information to be very helpful to you moving forward. :-)

May 10, 2010 | Goodman GMS90703BXA Heater

1 Answer

Goodman furnace\ blower comes on,unasked


Sounds like the fan switch on the furnace is set to low. Turn power off to furnace, take door off of furnace look for a fan switch, it may be a fan - limit together. The limit settings should be approximately 160° to 200°, and the fan settings should be about 100° to 140° set it to 120° it it's already set there then you probably need to replace it.

Aug 03, 2009 | Heating & Cooling

2 Answers

Twinning problem


Switch the leads and also make sure that you have a good ground.

Mar 30, 2009 | Goodman Heating & Cooling

2 Answers

Goodman GMP100-5 Rev Furnace Manual


I don't know where you are located, but there is a Goodman distributor in Sacramento, CA. Also in Ontario CA. They are a distributor so they may be able to help you or tell where to find someone who will help. Goodman is also known as GMC or Janitrol.

Jan 07, 2008 | Goodman GMS90703BXA Heater

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2458 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...