Question about Sewing Machines
Need free instruction book jones sewing machine
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
all machines thread the same. TTN tension,take up, needle.
Beginning with the spool, guide the thread through the thread guides to the tension assembly. Pull the thread through the tension assembly and test it to make sure the tension is working correctly.
(To do this test,adjust your tension setting to normal or medium or 5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If it passes this test, continue up through the take up lever,then down through the thread guides to the needle. Make sure your needle is fully inserted and turned the correct way.( If you load your bobbin case from the left side,the needle rule is normally FLAT to the RIGHT is RIGHT. There are some exceptions. If you have a newer style drop in bobbin or your bobbin case loads in the front then the rule is FLAT to the BACK.
To wind the bobbin, guide the thread around the thread guide on
the left top of your machine, then to the bobbin winder. Wind the thread around the bobbin several times, place the bobbin on top of the bobbin winder, push it against the wheel and press the foot pedal. It should stop winding when the bobbin is full or you take your foot off the control
Posted on Jun 05, 2008
SOURCE: Brother Sewing Machine CS-100
My niece has this machine, was recently helping her sew with it -- I go the E6 code also - I believe it is the button lever is down - it is the white/beige 'flag' arm beside the presser foot - it needs to be raised back up to the case housing to clear the error - it means you do not have the proper stitches for the foot. Good Luck.
Posted on Jul 28, 2008
Hi, I downloaded (for free) a copy of the Envision 8006 (and 8007 supplement) manual from the Elna website 2 1/2 years ago. The Envision 8007 is the same as the Janome Memory Craft 5700. I can email you a copy of the manual.
Posted on Apr 11, 2009
How old is yours (what is the serial number)? Which bit of the machine do you want to thread? I have a late model (550,000ish)...
Posted on Nov 15, 2009
Tips for a great answer:
Jul 12, 2017 | Janome Sewing Machines
Nov 23, 2016 | Singer Sewing Machines
Aug 15, 2016 | Sewing Machines
Jul 09, 2016 | Sewing Machines
Sep 29, 2013 | Sewing Machines
Nov 08, 2012 | Sewing Machines
Dec 01, 2010 | White Sewing Sewing Machines
Sep 12, 2010 | Brother LS-1520 Mechanical Sewing Machine
Mar 27, 2009 | Sewing Machines
138 people viewed this question
Usually answered in minutes!