Question about Vizio P50HDTV10A 50 in. Plasma HDTV

Open Question

Try to turn on .the orange power light blinks 10 times no picture

Try to turn on the orange power light flashes 10 times then green light stays on no picture or sound

Posted by on

4 Suggested Answers

  • 92 Answers

SOURCE: Plasma does stay powered on

Your sustainer board is probably bad. You need to get the Y & Z sustainer boards replace then it should be okay.

Posted on Feb 09, 2009

  • 1 Answer

SOURCE: Vizio 50 inch plasma tv has no picture and no

check the Y-sus and Z-sus board

Posted on Nov 02, 2009

spr1949
  • 1182 Answers

SOURCE: vizio p50hdtv10a led light blinks 10 times when powered off

If the problem is same with different input devices and you have ensured the are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.

Posted on Aug 23, 2012

gopakumarg43
  • 72620 Answers

SOURCE: does anyone know where i can find what the blinking error code info for a vizio p50hdtv10a?

If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2250 posts now. All are related to electronic equipment repair help. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter"

Posted on Apr 13, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vizio p50hdtv10a led light blinks 10 times when powered off


If the problem is same with different input devices and you have ensured the are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.

Aug 16, 2012 | Vizio P50HDTV10A 50 in. Plasma HDTV

2 Answers

Alternate green and orange lights flashing, tried to remove battery pack and left off for half hour, still problem, if i hold green button down orange light blinks 15 times which i saw in the manual to...


Hi I have a ip100 portable printer and both green and orange lights flash. Green flashes twice and the orange light flash at what seems to be a random disorder.

May 17, 2011 | Canon iP100 Portable Printer

1 Answer

I have a Sony Wega LCD Projection 60wf655. When I turn it on, the red light turned green and blinks green 6 or 8 or 10 times or indefinitely. No picture but after a minute of being on the screen glows...


This could be the "thermal fuse" which usualy is next to the light bulb. Part cost around $5.00. Please check your manual for directions depending on light and times blinking.

Apr 11, 2011 | Sony Grand WEGA KDF-60WF655 60" Rear...

2 Answers

Projector screen turns off after 10-20 seconds


Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present.
Just an idea?

Jan 03, 2010 | NEC NP-1000 Projector

1 Answer

When I turn on my Canon iP3000 printer the power light blinks five orange and one green light and continues to to so. It will not stay solid green.



Hello try

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 02, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

2 Answers

The printer flashes orange light five times, and green once


Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.

This also applies to the i550, i560, i950, i960

Sep 07, 2009 | Canon BubbleJet i560 InkJet Printer

Not finding what you are looking for?
Vizio P50HDTV10A 50 in. Plasma HDTV Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...