Question about Projection Televisions

5 Answers

I am trying to find a universal remote code to control the new Zenith digital tv tuner converter box. The model # is DTT900. It is for a person with low vision who cannot see the buttons on the remote that comes with the unit. Any help will be greatly appreciated A. F. Mc Quillan artmcq@hotmail.com

Posted by on

  • artmcq Oct 23, 2008

    Unfortunately, the remote is in Florida. I will have to wait until I am down there to get the make and model number of the remote. I was under the impression that the code went with the unit
    ( tv, vcr, etc) and that all remotes used the same code for the unit.


×

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 200 Answers

Hi

I own a Zenith DTT900 Converter, along with a briefcase full of universal remotes. Most of the remotes I own do not work with the converter, but here are the codes and remotes that DO work that I know of: All are programmed under the satellite receiver button.

Phillips PM6225 6 Device Consolidator--Code 267, which is listed as a Zenith satellite receiver

Radio Shack Model 15-135 HDTV Pro Remote-- Code 01414, which is listed as a DirecTV satellite box code, as well as an LG satellite box code

Radio Shack 8-in-1 LCD Remote Model 15-100--Code 01414, which is similar to the model 15-135.

Zenith 6 Device Universal Learning Remote Model ZN620--Code 267, similar to the Phillips remote listed first.


thank you

Posted on Oct 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

On a One For All Universal Learning Remote URC-8820, the code that operates my Zenith DTT901 is 1415 on the cable button. This is the code for LG HDTV Decoders. If you don't have the same remote, I'd look up the code in your remote's book for LG HDTV Decoder (also listed under "Video Accessories" in my remote's setup book.)

All except one of the key functions work to control the Zenith box by setting that one code on my universal remote, including zoom, info, programing menu, recall, mute, channel, volume, etc. The only function that I may have to program manually is Simple Guide.

Hope this helps

Posted on Oct 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Pls post back with the brand and model of the universal (replacement) Remote Control or what remote control you would want to use with the Zenith DTT900 Digital-to-Analog Converter Box.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Oct 23, 2008

  • Louie  Role
    Louie Role Oct 23, 2008

    Hi again,

    I was made to understand that the Zenith DTT900 Digital-to-Analog Converter Box is actually an LG device. You may want to check the LG listing of your Universal Remote. Additional insights may be sourced from here or here.

    Some that you can try are:


    • 1415;

    • 212;

    • 267
    for starters.


  • Louie  Role
    Louie Role Oct 23, 2008

    Appreciate your quick postback. Unfortunately not all universal remotes uses the same set of codes. No worry then, at your convenience, if and when.

    Cheers.


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 507 Answers

You may try 401
http://www.xdiv.com/remotes/

Posted on Oct 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

Please give me the make and model no. of your remote so that i can give you the code.

I will be waiting for your reply.

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a r57w46 zenith tv need a converter box


General rule of thumb: If your original remote does not have a dot ( .) or a dash ( - ) near the numeric buttons, the TV is does not have a digital tuner. These buttons are used to directly enter a digital channel number such as: 19.1 or 19-1. After looking at your TV specs, this TV needs a converter box if you plan on using a roof top antenna. I hope this was helpful, best wishes.

Jun 29, 2010 | Zenith R57W46 57" Rear Projection...

1 Answer

Setting up a universal remote


Whats the brand of universal remote?

If you have the original remote I can suggest some learning remotes that will absolutly work with it.

Cheers,

Jan 06, 2010 | Zenith Projection Televisions

2 Answers

Toshiba 51H84 Television Questions


I'll try to respond to the questions in order;

1) This unit requires a converter. It only has an NTSC tuner not ATSC.
2) The remote will not control the converter as the coverter is too new.


Your best bet for having a songle control for all devices is to purchase a universal remote that will control the converter. I am not aware of one, but must admit that I have not really looked much. To control the number of devices you would like, the control will likely cost in the $10-$15 range.

Keep us posted,

Dan

Dec 22, 2009 | Toshiba 51H84 51" Rear Projection...

1 Answer

No remote control with tv


Try using goldstar or LG codes with the remote. (LG/Goldstar owns Zenith)


michtech

Feb 18, 2009 | Zenith IQC60H95W 60" Rear Projection...

1 Answer

Converter box trouble


hello no the only thing the box does is it takes digital signal and convert it in analog signal and cannot do any hurt your tv at all u will be just find marty

Oct 14, 2008 | Panasonic PT-51HX41 51" Rear Projection...

2 Answers

I am lookin for a code for a universal philips remote to use on a zenith tv dont know if this is waht yhou do but it came up int hte search for what i asked for


Direct Philips Magnavox Universal Remote Code Entry PM335
  1. Press and hold the Code Search button until the red
    indicator stays on.
  2. Release the Code Search button.
    Press and release the desired mode button likeTV,
    DVD)
    The red indicator will blink, then stays constantly lit.
    Enter the 3 digit code as below.
  3. Please note: The red indicator will turn off if code entry is valid but will flash for invalid codes.
  4. With the device on, press CHANNEL Up. No further programming is required should there be a response from device. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

TV


ZENITH ............. 241 142 345

Aug 15, 2008 | Projection Televisions

1 Answer

Can not find code to program my tv and remote control I have a zenith television and a zenith universal remote


One website (Thompsontv.com/zcodes.html), says that the setup code for a Zenith TV, using a Zenith universal remote, is one of the following numbers: 101, 142, 149, 177, 175.
If these numbers do not work, visit the Zenith website (Zenith.com) for contact info.
Hope this info helps you out. Please take a moment to rate this solution,using the rating system below. Thanks.

Jul 16, 2008 | Projection Televisions

1 Answer

The short version: Will a 14-year-old TV work with digital-to-analog TV converter? Specifically, I have RCA Model G25342AT, built in Sept., 1994. In case yes, converter should work... Trying to connect...


The converter box should work. Getting the remote to work with the TV might be a challenge. You might have to stick with two remotes. It used to be in the old days you could plug your tv power into the remote that way you would turn the tv on with the tuner remote but I be they stop doing that.

There is website that will let you check the digital televison signals for your area. This site should help you:

http://www.tvfool.com/?option=com_wrapper&Itemid=29

Jun 29, 2008 | Projection Televisions

1 Answer

I need a code to a universal philips remote control for a zenith TV


Try these codes: 0713, 0502, 0606, 0409, 0710, 0415, 0507, 0714, 0405, 0712, 0015, 0916, 0008, 0002, 0115, 0224, 0324, 0126, 0326, 0826, 0228, 0430, 0632, 0435, 0437, 0903, 0505, 0701, 0407

If these don't work, try this site:
http://www.urc.philips.com/
You may need to plug in a specific model number for your remote control on the left.

Jun 18, 2008 | Projection Televisions

2 Answers

I need codes for a Zenith Tv. Codes for a universal remote.


What brand and model remote do you have? each universal remote has their own codes for various tvs. Let me know your brand and model remote and I will see if I can find the codes for zenith from that manufacturer.

Jan 20, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...