Question about Singer CE-200 Quantum Futura Computerized Sewing Machine

1 Answer

CE200 - transmission error message - how to cancel transmission?

I keep getting error message stating that I cannot transmit the design to the machine as there is already one pending. 'A transmission to the machine is still pending. You must first cancel previous transmission to continue" I'm about half blind trying to find a solution! I can't for the LIFE of me figure this out!!! :-(

Posted by on

  • tendr4u2808
    tendr4u2808 Feb 15, 2012

    I found the answer!!!! You have to follow the start up protocol instructions to a "T"!!! I've not had one single problem embroidering now!!!! YAYAYAYAYAY!

    In case y'all can't find them, they're as follows....and remember, follow every step in this order!

    Boot up your computer if you have not already (mine's always on)

    Attach embroidery unit (mine's always on)

    Disconnect the foot control (mine's never connected lol)

    1) Turn on your machine by setting the Power/Light switch to (l)

    2) Turn hand wheel toward you until the needle is in the highest position

    3) Attach the hope that you plan to work with to your embroidery unit

    4)Double click on the Futura Icon on your desktop to open the program

    5) You are now ready to select and transmit a design to your machine!

    ALWAYS remember to CLOSE design when finished!

    Happy Sewing!!! :-)

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

TURN OF THE MACHINE AND SWITCH IT ON AGAIN.

Posted on Apr 05, 2012

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Transmition of new design

We had the same problem tonight. It was the first time we tried the machine and we wre quite upset. The help file and manual were of no use. I disconnected the USB cable.I then opened the "tile view" under the view menu. This showed two open windows, which I closed. I then started a new design, and everything went well. Peter

Posted on Feb 10, 2007

  • 1 Answer

SOURCE: Futura 100 Embroidery machine...Need to cancel previous transmit

The following steps must be followed for proper start-up protocol. If these steps are not followed precisely, you will get a “Transmission Pending” error message.
Boot up your computer, but do not open the Futura software. Next attach the embroidery unit to your sewing machine and connect the USB cable between your computer and sewing machine

  1. Turn on your sewing machine by setting the Power/Light switch to ( l ). Make sure the needle has been moved to the highest position by turning the Handwheel towards you.
  2. Attach the hoop that you plan to work with to your embroidery unit.
  3. Double click on the Futura Icon on your desktop, to open up the Futura Software.
  4. You are now ready to select and transmit a design to your machine
IMPORTANT: If you have embroidered using the small hoop, and you are now ready to use your large hoop. Turn off your machine, close the Futura software and then turn OFF your computer. Wait one minute, turn on your computer and then follow steps 1 through 4.
8. I have the Futura™ software open, but I have no

Posted on Sep 09, 2009

  • 2 Answers

SOURCE: Singer CE-200 cancel previous transmission

Easiest solution is to turn everything off (machine, computer, etc.) and restart from the beginning.

Posted on Sep 19, 2009

  • 233 Answers

SOURCE: cancel previous transmition

This happens every time I finish a design. First, close the software on your computer. Next, turn off the embroidery machine. Now unplug the USB cable from the machine and then from the back of your computer. Now reverse the progress. This will clear the "buffer" between your computer and the machine. It's a bit of a pain to do each time, but it does work.

Posted on Apr 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When trying to transmit a embroidery design to machine says there already one waiting how do you cancel the old one


Have you already transmitted a design and it has not finished? You can open several windows at one time, so it's possible that there is a pending transmission. If there isn't, I would close the program and then reopen it. That should have cleared out any previous designs that were transmitted in a session.

Jul 21, 2014 | Singer CE-100 Futura Computerized Sewing...

1 Answer

When I try to send a design to my Quantum Futura CE-200 I get a message that a transmission to machine is still pending, and I must cancel the pending design before I can continue. I have not used the...


Go to futura-support.com Go to FAQ and go to #7. Follow the procedure EXACTLY, save one thing that is not on there. BEFORE you do anything, make double-sure your machine is set for embroidery (E) and not sewing (S). Even if you follow the procedure exactly, if your machine is on 'S' and not 'E', you will continue to get the 'transmission' message.

May 23, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

How do I cancel a transmitted design. The needle


Turn the machine off and remove the hoop. Reboot the program and turn the machine back on.

Mar 11, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Singer CE-200 cancel previous transmission


Easiest solution is to turn everything off (machine, computer, etc.) and restart from the beginning.

Aug 29, 2009 | Singer CE-100 Futura Computerized Sewing...

2 Answers

Futura 100 Embroidery machine...Need to cancel previous transmit


Had the same problem. Singer rep. solved this mystery in just min. after talking to her.
You can call singer company at 1-800-4SINGER. It will take a long time to get through, but they can talk you thru to resolve this matter. Or just visit singerco.com and go to F&Q section, #7 question.
Or you can email talktous@singerco.com (that's talk to us @ ...)
They answered my email the same day!
Hope this helps!

Jun 19, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Futura CE-200 Stops in middle of design and says wrong hoop size


Dear cjnations
Firstly we must all remember that the CE200 is a very particular machine and requires that you follow certain procedures in order for it to run smoothly. When using the small hoop, firstly you must make sure that the small hoop is selected on the screen by going to Tools, Select Hoop & clicking on small frame. Once this has been done and the design selected, you must then attach the small hoop before sending the design to the machine. If you attach the hoop after sending the design, the machine will give you the error message.
Good Luck!

Nov 16, 2008 | Singer CE-200 Quantum Futura Computerized...

2 Answers

Frustrated!!


It may be faster and easier to contact your local Singer dealer, or Singer HQ in your country........they will want you to have a good experience with their product, even if it was second hand.....if there is a problem with the machine, they may even suss it over the phone for you.

Jun 09, 2008 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Future CE-250 will not transmit anything, help!


I had same problem, the error message indicated that USB was not recognized by the program. I then tested with a spare cable, it worked. Therefore, the problem appeared due to a defected cable. Hope this helps.

Dec 29, 2007 | Singer CE-200 Quantum Futura Computerized...

3 Answers

Transmition of new design


We had the same problem tonight. It was the first time we tried the machine and we wre quite upset. The help file and manual were of no use. I disconnected the USB cable.I then opened the "tile view" under the view menu. This showed two open windows, which I closed. I then started a new design, and everything went well. Peter

Feb 08, 2007 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Singer CE-200 Quantum Futura Computerized Sewing Machine Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Cindy Wells

Level 3 Expert

5124 Answers

mystery_soul

Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...