Question about Packard Bell iMedia Computers & Internet

1 Answer

I have Packard Bell i switch it off then when i get back to switch it on it doesnt want to dispaly and recently it shut down itself

It shut down itself and it not displaying anything

Posted by on

  • Jeffrey McDaniel Feb 08, 2012

    Is the computer posting (i.e. does it beep once on power up, is the packard bell screen displaying, ect)?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Packard Bell Master
  • 27,725 Answers

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive


Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have a secure connection and are not faulty or just replace them they could be faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error

even something as small as a faulty electrical extension or fan lead can cause you problems

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly


motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail

check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working


also check the Cmos battery and computer RAM modules make sure they are securely seated with no dust built up or in the sockets on some motherboards cmos batteries are soldered in

check you CPU make sure its securely seated and has thermal grease might be getting to hot


another possible reason could be a memory dump you might be running to many programs at the one time putting to much strain on the CPU central processing unit


hope this helps you

Posted on Feb 09, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: PACKARD BELL COMPUTER TOWER

Hi, sounds like your hard drive is going/gone flaky...  & if so ya gonna haveta get a new hard drive & a Windows Operating System. 

Or take it to a good PC repairer, and get a quote and  explanation.

Posted on Oct 15, 2007

  • 1 Answer

SOURCE: wireless button on packard bell easynote MV35-202?

how do you turn pakardbell switch on a labtop

Posted on Nov 03, 2008

TampaNative
  • 778 Answers

SOURCE: I recently connected a Packard Bell 1020 monitor

You need a driver for your Compaq's audio card. You can input the exact model number at the site linked below to retrieve the one you need.

http://welcome.hp.com/country/us/en/support.html

Posted on Apr 19, 2009

Saigua
  • 981 Answers

SOURCE: packard bell ipro yellow flashing light

Huh! Sounds like a power issue. Unplug, try cleaning out the guts in case something got in there, and retry, and again with a spare power supply if things are still bad. It would help to know whether something other than the power supply's clicking, I suppose....

Posted on Feb 14, 2010

scc2657
  • 90 Answers

SOURCE: Packard bell ixtreme turned itself off whilst on

wow...ok wel if it's only 5 mounths old it still under warrenty right? Call them for a new unit.


Please leave comment and review.

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i unlock my keyboard. lts packard bell easynote TE11 BZ


Hello

Does the whole keyboard not work or only some keys?
Try the following shut down the computer , disconnect the power cable and remove the battery from underneath then press power button for about 20 seconds then reconnect the battery and the mains power and switch on the laptop again.
Did you spill any liquid on the keyboard?

Jan 23, 2015 | Packard Bell Computers & Internet

1 Answer

Packard bell imedia 1459 dead


you proberly got no power.if no fans or lights i should think of replace the PSU.

Apr 08, 2013 | Computers & Internet

1 Answer

Packard bell ixtreme 9087 keeps powering off after boot up


Maybe it is not getting cool enough cause the cooling fan is not working. You need to provide more info about at which point of booting up, it gets shut down.

Apr 02, 2013 | Packard Bell Computers & Internet

1 Answer

Packard Bell laptop 4 way split screen


yes,when it switches on click on start windows normally

Apr 14, 2010 | HP Computers & Internet

1 Answer

Packard Bell laptop switch off instead of hibernate


This is done via Windows Control Panel -> Hardware and Sound -> "Power options" -> "Choose what closing the lid does" and select 'Hibernate' instead of 'shut down' for both 'On battery' and 'Plug-in' power.
Let me know how you go!

Dec 30, 2009 | Computers & Internet

1 Answer

Dont know hot to get the @ key


The @ symbol is selected by holding the Shift key and then press the number 2 key.

Oct 07, 2009 | Packard Bell Computers & Internet

1 Answer

Packard bell utow co20 the computer will stay on for as long as I dont use it, but as soon as I start useing it it will shut down in about 5 mins


First things first: "work" in giving this away has dodged the "responsible disposal" bullet. Drivers for this unit are probably limited to windows 98 or earlier, as the last Packard-Bell was produced in that era. Drivers for sound in particular were Packard-Bell only, and since they aren't around any more unless you can get your hands on the original installation CD you're out of luck to make the existing soundcard work. You do howrever have the option to install a newer soundcard, that should fix that issue. As for the shutting down, make sure the heatsink has good thermal contact with the processor as it sounds like the processor may be overheating. If there's a fan make sure it is running.

You've got a challenge if you want to see it all work, have fun.

May 30, 2009 | Packard Bell DR724 Motherboard

3 Answers

Shuts itself down


helo,, you must change the power supply,, it has the problem

Mar 28, 2009 | Computers & Internet

1 Answer

Packard Bell no longer switiching on or charging


sounds like a bad dc port, but if it was smokeing and has a burned smell i m betting it burned the board

Dec 17, 2008 | Computers & Internet

1 Answer

Packard bell utow co20


Please look on the case of the PC, fron back & sides. There should be a model number. (There is no such number you posted, Packard Bell UTOW CO20).

Mike

Jul 06, 2008 | Packard Bell DR724 Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Daniel Florin
Daniel Florin

Level 2 Expert

203 Answers

Are you a Packard Bell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...