Question about Schiller Welch Allyn Cardiovit At 2 Interpretive Ekg Machine

2 Answers

Schiller Welch Allyn Cardiovit At 2

IT IS HAVING TROUBLE PRINTING ON THE TOP OF THE SHEET. THE WAVES OF THE EKG ARE FINE BUT WE CANNOT SEE THE PORTION THAT PRINTS OUT WITH PATIENT NAME AND RESULT.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I HAVE SEEN THIS A FEW TIMES. I HAVE RELATED THIS TO THE PAPER CARRIES TRAY! CHECK THE TRAY AND MAKE SURE THE TIPS HAVE NOT BROKEN! THIS COMES FROM SOMEONE SLAPPING THE TRAY INTO PLACE INSTEAD OF COMPRESSING THE SMALL RELEASE.
MIKE
CALL
909-599-1789

Posted on Jan 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 157 Answers

Hello LV792727, Disconnect the AC & battery power and proceed with caution. Open the case to aquire access to the thermal print head. Clean the print head with a white eraser, the type used for cleaning ink prints not the #2 pencile eraser. Test the printing function. If necessariy use a Q-Tip with a light touch of Aceatone to whip the print head. The next step is replacing the printing element. Please inform me of the results. Good luck.

Posted on Nov 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The ekg machine light of filter is flickering and when printing only prints one line out of three appears as if no ink


HI,
Here i added a link which will help you to rectify the problem. Its seems to be the battery of your ECG machine is faulty.

Schiller AT 1 Support

Jun 25, 2012 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Schiller cardiovit at-2 we can only get 3\4 of a ekg it stops


hi,
ur Schiller at 2 has problem with its battery. just replace the same. its a12v battery.
also clean the paper sensor Whit an ear bud (do not use any chemical use only ear bud). u can see the paper sensor on the side of printer head. a square black portion.
ok

Jan 03, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

It will print 3\4 of the ekg it stops !!


hi,
ur Schiller at 2 has problem with its battery. just replace the same. its a12v battery.
also clean the paper sensor With an ear bud (do not use any chemical use only ear bud). u can see the paper sensor on the side of printer head. a small square black portion.
ok

Jan 03, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Machine boots up properly. You can enter patient data, switch between scales/ranges, etc. You can select the ALT functions. The problem comes when I try to print. If I press "Auto Print", it...


hi,
ur Schiller at 2 has problem with its battery. just replace the same. its a12v battery.
also clean the paper sensor With an ear bud (do not use any chemical use only ear bud). u can see the paper sensor on the side of printer head. a small square black portion.
ok

Nov 29, 2010 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Where is the battery located on the welch allyn at-2 plus? And how do I get to it?


hi,
usually in AT-2 battery is located inside the machine. u have to pullout the top cover by removing the screws. be care full while pulling up the top cover, there are key pad connections running into the main board.on the right corner u can see the 12v battery.
ok

Oct 05, 2010 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

How do i know if my ekg is interpretative?


Sometimes you can print out a report even though you are not connected to a patient. If a report prints out you will see "interpretation" on the top middle of the page. If interpretation is not there it most likely means you do not have interpretation. You could also call welch allyn and give them the serial number. They will be able to tell you.
If you have further questions you can contact me at wats@mesasales.com or through our website www.overstockme.com

Jul 18, 2010 | Schiller Welch Allyn Cardiovit At 2...

3 Answers

Schiller AT-2 Plus, placed new paper in machine and machine keeps stating "out of paper" and will not print unless I hold down the manual print.


Your machine has the wrong paper in it or the paper sensor is not working properly.  There should be a black mark on the top left hand corner of each page.  The correct ekg paper and ekg repair is available from Medical Device Depot.

Feb 15, 2010 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Schiller Cardiovit AT-2 Cardiovit CH-6340


I have (2) Welch Allyn, 3700/B-2211 Scanteam scanner available for sale.

Oct 06, 2009 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

I Have similar Problem with one AT-10


Hi.
Only recharge by 12 Hours and the machine work fine.
This model of system only work or start with Battery charged
Thank you for your assitance

Jul 29, 2009 | Schiller Welch Allyn Cardiovit At 2...

Not finding what you are looking for?
Schiller Welch Allyn Cardiovit At 2 Interpretive Ekg Machine Logo

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Schiller EKG/ECG Machines Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5601 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

The Knight
The Knight

Level 3 Expert

68139 Answers

Are you a Schiller EKG/ECG Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...