Question about Scotsman Refrigerators

Open Question

Scotsman cme506 model si blinking twice,what does that mean?

Unit is not letting wate in

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: scotsman cme506

i service scotmen cme506 blink 2 times in the water iclean bin sensors check water lebels install new inlet valve and due same

Posted on Mar 31, 2011

qasolution
  • 107 Answers

SOURCE: scotsman cme506

change the ice bin sensors they are infrared sensors and they are not working.If you have already taken them out and cleaned them replace them.Those sensors are 75 percent of all my service calls on this perticular unit.

Posted on Apr 20, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Scotsman cme506 I'm already replace the two bin sensors and the main control but the problem still full bin light. Never turns off do some know what I can do pls ???


When you replaced the CM3 Universal service controller did you set the right setting on the selector switch on the side of controller? The program selection table is on the back. Also make sure the wires on the din eyes are not grounded to the cabinet of machine and do not cut the wire and splice them.

Nov 04, 2014 | Kitchen Appliances - Others

1 Answer

What can I do to fix cem256 ice machine that the refigeration light blinks twice ?


http://hvac-talk.com/vbb/showthread.php?679751-Scotsman-CME256-Water-Diagnostic-Light-Problem

May 15, 2014 | Scotsman Ice Machine - 290lb...

1 Answer

Error code timer light blinks twice


Depending on the model, this usually means "Serial signal (reverse) error at start up" which means that the indoor unit is not receiving a response from the outdoor unit when it tries to "talk" to it. It can be several causes but In my experience, it is usually the outdoor controller board. Again, depending on the model, there can be several boards in the outdoor unit any or all of which could be causing the fault as well as a faulty fan motor or compressor. The bottom line is that you are going to need a tech to take a look at it to diagnose properly.

Apr 07, 2014 | Fujitsu Heating & Cooling

1 Answer

Light blink twice


Which light is blinking the water or the refrigeration light this info will help

Dec 19, 2013 | Scotsman Ice Maker 600LB CM3 30inW...

1 Answer

Scotsman CME506 will not stop making ice


Replace the bin control sensor set of two. Part number 11-0540-21. The bin control sensor is not sensing that the bin is full.

Aug 03, 2013 | Kitchen Appliances - Others

1 Answer

Cme 506 cubes too small


turn ice bridge thickness screw clockwise to thicken and counterclockwise to get thinner. Do not turn anymore than about 1/8 turn between freeze cycles. the adjustment screw is very finicky and requires patience in setting properly. the distance from the bridge thickness gauge to freeze platen is approximately 1/4 - 5/16 of an inch.

Nov 20, 2012 | Scotsman Ice Machine, Cuber, 1825 lb....

1 Answer

My scotsman cm universal service controller keeps shutting off and refrigeration light blinks twice. But there is plenty of freon. What is the problem?


Most likely water inlet valve. When they get stuck open water continuously flows in preventing it from from freezing and therefore the controller thinks it's running and not getting cold enough so it cuts off on refrigeration. It will cut off on water if no water is detected.

Nov 06, 2012 | Scotsman Ice Maker 600LB CM3 30inW...

1 Answer

Should a scotsman ice machine automatically stop making ice once the bin is full


Yes, all ice machines have a means of automatic shut down when the bin is full. What is the model number of your machine and your bin?

Dec 16, 2010 | Scotsman Ice Machine, Cuber, 1930 lb....

2 Answers

Scotsman cme506


i service scotmen cme506 blink 2 times in the water iclean bin sensors check water lebels install new inlet valve and due same

Apr 14, 2009 | Scotsman Cooled Modular Contour Cuber...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scotsman Refrigerators Experts

john h

Level 3 Expert

10986 Answers

howard thompson

Level 2 Expert

373 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Scotsman Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...