Question about Carrier XHB123D X/Y Series Heat/Cool Air Conditioner

1 Answer

Carrier Weathermaker SX model 58SX060-CC Blower runs all the time

I have a Carrier Weathermaker SX model 58SX060-CC-1, series 170, 66,000 BTU furnace. The intake/exhaust fan starts when the thermostat tells it to, the pilot lights, but the main flame does not ignite.

The problem started this morning I changed batteries in thermostat and turned on furnace. The burner started, exhaust fan turned on but the main blower would not turn on. After a few minutes, the burner turned off and the main fan turned on. I turned the fan from Auto to On and the house warmed up. I then waited to here thermostat turn off and that was the last time the burner turned on. Now the blower runs all the time with out heat?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Remove all power from the furnace, it is likely the brain in the furnace is need of being reset, from the battery replacement, why did you change the battery, was there an indicator telling you to change it?

Many times just removing all the power to the furnace will do the trick with a reset, if not let me know and we will go from there, but it sounds like the main brain is confused or bad, more likely confused, so try the power removed first.

Than let me know wbwill@sbcglobal.net

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heat exchanger replacement for carrier weathermaker 8000


After 18 years of service, it is not cost effective to just replace the heat exchanger. Go the complete replacement route. There may be a utility company incentive to do it.

Jun 06, 2016 | Carrier Weathermaker 8000 Gas Furnace 125k...

1 Answer

Why wont an older model carrier gas furnace light when standing pilot light is lit at all times? Why would there be no gas at the burners


when it comes to GAS appliances , I do not recommend any self fixes . they can explode and do you serious damage even up to death .call a gas furnace repairman

Feb 28, 2016 | Carrier Weathermaker 8000 Gas Furnace 125k...

1 Answer

Weathermaker 8000 58TUA doesn't work


The switch could be defective but more likely the furnace blower is failing.

Dec 17, 2013 | Carrier Weathermaker 8000 Gas Furnace 125k...

2 Answers

Furnace runs constantly since blower motor was replaced


Sounds like they wired it direct to line voltage , it should run through a sequencer or fan relay to cycle on and off , your seq./relay could be stuck closed to but unlikely being it was just repaired , call the service company back before you do anything they are responsible.

Apr 11, 2009 | Carrier XHB123D X/Y Series Heat/Cool Air...

1 Answer

When burners come on makes a swiching noise and then goes out and


The carrier sx series went through a number of control systems over the years. can you find the full model, and series numbers? They are located behind the door on the left side. (i.e. 58 sxc080-100 series100)

Dec 30, 2008 | Heating & Cooling

1 Answer

Furnace pilot is on, pilot ignitor continues to click, no main flame


sounds like the sensing bar on the spark ignition is dirty.....a wire brush works nicely.

Oct 17, 2008 | Carrier XHB123D X/Y Series Heat/Cool Air...

1 Answer

Weathermaker SX Carrier 58SX060-cc-1


Your blower motor may have failed. Check the blower motor for the air circulation and you may find it is hot but not running. Have the motor replaced if this is the case.

Jun 11, 2008 | Carrier XHB123D X/Y Series Heat/Cool Air...

4 Answers

Carrier weathermaker sx 58 furnace


I have serviced these furnaces for 20 years and I can tell you most of these models did not have diagnostic lite on them. (although some did, especially if the control board has been replaced) The problem is most likely a bad 3 wire pilot. This will cause exactly what you describe. 2 things to consider though. 1, If you were to replace the pilot don't get a cheaper knockoff. In my experience these do not last long at all. Get the right one from a carrier dealer. It will cost more but be much more reliable. 2 What is the condition of the secondary heat exchanger? Most if not all of the sx series had issues with the secondary heat exchangers rotting out and leaking. If the furnace is out of warranty you would be much better replacing the furnace as the cost of replacing the secondary heat exchanger will probably be almost the same as a new furnace. ( those babies are EXPENSIVE!)

Dec 17, 2007 | Heating & Cooling

Not finding what you are looking for?
Carrier XHB123D X/Y Series Heat/Cool Air Conditioner Logo

1,794 people viewed this question

Ask a Question

Usually answered in minutes!

Top Carrier Heating & Cooling Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Donni Steen

Level 3 Expert

659 Answers

Bill Long

Level 3 Expert

587 Answers

Are you a Carrier Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...