Question about Panasonic PT-56TW53 56" Rear Projection Television

1 Answer

No Audio or Video, blinking power light

Hi, All of a sudden, I came out of another room to find the picture gone and the power light blinking 3 times, then long pause, and repeats. I can't turn the tv off of on both with the remote and by pressing the button on the tv. Any help would be appreciated! :) Thanks, Mark

Posted by on

  • 2 more comments 
  • mjolrn Feb 09, 2008

    Thats exactly what I am seeing. I tried unplugging for 15 min...no effect. I tried unplugging for 1 hour....no effect. Any solutions would be appreciated.

  • darrylmarc Mar 26, 2008

    Same problem the other day: Three blinks then a long delay and no power on or off

  • Anonymous Aug 27, 2008

    I have the same problem with the TV no audio or video, blinking power light

  • Anonymous Nov 14, 2008

    I have the same problem no audio or viedo, blinking light problem

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you ever find anything out about this? I have a pt-53tw53g with the exact same problem, and I've been unable to find out what the three flashes means.

Posted on May 27, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flashing power light


The power supply may have failed

May 09, 2016 | JVC SP50MC 50" Full HD 1080p LED TV

1 Answer

Sony bravia kdl55hx729 3d led tv turns on 3 seconds shows picture than four red flashes


Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja

Dec 07, 2013 | Sony Bravia KDL-55HX729 LED Internet TV...

1 Answer

Hl72a650


color wheel issues replace light engine

Jul 07, 2013 | Televison & Video

2 Answers

My Canon EOS rebel suddenly won't take pictures in dim light. The flash pops up and blinks and blinks trying to register the image but won't ever autofocus and take the picture. The light has to be very...


To autofocus the sensor needs a fair amount of contrast (light and dark eges) to operate. If you're trying to take a photo in a dim room of a dark colored subject for instance the focus won't lock and the camera won't take the picture. Try switching your lens to manual focus and shoot that way.

Jan 07, 2011 | Canon EOS 500D / Digital Rebel T1i Digital...

3 Answers

Sony Bravia KDL 46", no picture, standby light blinks 4 times


Since the TV is still receiving power, the problem is going to be with the TV's mainboard.  After you unplugged the TV and plugged it back in, you said the power light went out again, so I assume the standby light wasn't flashing again?  The flashing standby light is indicating an error code so my suggestion is to contact Sony for service options regardless if there is a warranty or not because service is the only solution to this situation.  Don't forget to provide them the error code or 4 flashes repeating.

Mar 25, 2009 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

1 Answer

No sound and the power light is blinking


I had similar issue with power light blinking 3 times and no audio/video.

The problem was a burnt resistor and gone convergence ICs. I replaced both ICs (safer bet unless you know exactly which IC covers what guns in your specific TV) and the burnt resistor by myself and the TV looks good as new.

Apr 06, 2008 | Panasonic PT-56HX41 56" Rear Projection...

1 Answer

I have suddenly lost the picture on T.V. but still hear audio of program...


sounds like your input board went out. I had the same problem on the ILO version of this panel. Got a replacement part off of Ebay. Search for Ilo plasma on ebay and it will come up

Sep 08, 2007 | Tatung P42BSKT 42 in. HD-Ready Plasma...

2 Answers

No picture on a Sony KV-32V65 TV


AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the Cboard, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking.

Jan 18, 2007 | Sony KV-32V65 TV

Not finding what you are looking for?
Panasonic PT-56TW53 56" Rear Projection Television Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5585 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

75888 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...