Question about Itw Devilbiss Itw Paslode Cnp 65Y Coil Nailer

1 Answer

Paslode im350 my im350 paslode nail gun fires 2 or 3 nails then wont fire.then if i wait 30 secs or so it will fire another 2 or 3 nails then wont fire again

Posted by on

  • Anonymous Mar 18, 2014

    Paslode IM250A nails jambs. Oiled cleared jamb. Cleared nail feed. It fires but nail will not comeout and jambs.

  • Anonymous Mar 22, 2014

    How do you adjust nail depth

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

Stuart - this sounds like an air problem - you should perform the following test. With the air nailer close to the compressor you must monitor the airpressure after the gun fires. it sounds like the air is not gettting through diapram fast enough or there is a blockage in line. Blockage in line is not suspected for the following reason . It sounds like the air hose is holding enough air to fire 2-4 nails and then you must wait for the line to fill up again and then it fires ok. The pressure regulator out to the line controls this and they do fail. try this test and report back to me - I know I can solve this for you as I have extensive background in compressor and the like.

Posted on Oct 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My paslode impulse 1m50f18 fires normally but no nail apears with paslode nails?


not sure what you mean" no nail appears with paslode nails" if it fires make sure the nails are correct for your gun

Sep 08, 2015 | Air Tools & Compressors

1 Answer

Paslode im350 fires every time,but nails dont come out


Unless you have the wrong nails or a problem with the feeder and/or feeder spring it is probably dirty and the driver is hanging up on the cylinder. These tools need to be cleaned and lubed after using them for some time. If you look on Paslode's website there is a manual that explains how to do it. There are also videos on YouTube that show this. It is somewhat complicated and the tool has to be disassembled quite a bit. If you don't feel comfortable doing this work then you may want to want a servicing dealer that repairs these tools. There is a rubber o-ring on the head and a filter on the top that should be replaced too. Here is a link to the cleaning guide.

Paslode IMCT cleaning guide

Aug 26, 2012 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Paslode im350/90ct green light goes red when applied to surface and wont fire


Unplug. Check that you don't have a nail jammed in the end of it.

Apr 03, 2012 | RTO Air Tools & Compressors

1 Answer

Paslode IM350 90CT Nail Gun gun light green gas full battery charged fan works gun wont fire


Try a different gas cartridge and make sure the top of the cartridge is snapped tightly onto the cartridge body.

Jun 23, 2011 | Air Tools & Compressors

1 Answer

Hi .my im350 nail gun isnt working gas and battery ok and gun is cleaned.light on green .but when depresssed makes strange noise and lights on fire from fan end?


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



././

Oct 24, 2010 | RTO PasLode 900420 Impulse Framing Nailer

2 Answers

Paslode im350 will only now wrk properly when on a flat surface i cannot fire in at an angle without it mis-fireing


Make sure the nails are inserted so that the follower maintains pressure on the strip of nails. Also, your pressure on the whole gun at an angle is probably not as great as on the flat---could lead to misfiring

Mar 02, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

My finish nail guns, 16 ga won't fire.


There is a little plastic piece inside above the trigger...usually this breaks. It touches a microswitch when the cylinder is closed all the way, allowing the nail to fire.

Oct 04, 2009 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Nail comes out another hole


are you using the right nails and are they inserted properly if this is an angle gun? Also look for a jammed nail that might be causing this. look at the magazine bolts to make sure they are tight. You can go to Paslode.com for the owners manual and troubleshooting guide.

Sep 10, 2009 | RTO PasLode 900420 Impulse Framing Nailer

4 Answers

Paslode 350 wont fire


Hi,
Probably needs cleaning. You`ll need two new o`rings.

Aug 19, 2009 | RTO PasLode 900420 Impulse Framing Nailer

Not finding what you are looking for?
Itw Devilbiss Itw Paslode Cnp 65Y Coil Nailer Logo

1,293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Itw Devilbiss Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1378 Answers

Brad Brown

Level 3 Expert

13809 Answers

james allen
james allen

Level 2 Expert

109 Answers

Are you an Itw Devilbiss Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...