Question about Watches

Open Question

Resetting my radio controlled watch

Watch is a non-branded model bought from the Daily Express mail order dept. Somehow its buttons got pressed to change the time zone and it's now five hours behind UK time.
I can't find the manual/instructions and don't know how to get it to correct itself using the UK transmitter.
It has four buttons, one on each corner. Labelled from top left clockwise Light, Signal, Display and Time Zone.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
skyreacher36
  • 74 Answers

SOURCE: Lost the manual. Son reset watch. I've reset the

go to www.casio.co.uk go to support(methinks??) click on watches and put in the model number (the one you posted) and download the PDF manual relating to your watch (you will need adobe reader free download to read PDFs), this will be the full manual, once you figure it out DST will have to be on, as its summertime of course. ( i bought a wave ceptor for a fiver because the guy who had it didnt know how to recalibrate it after a battery change), a quick gander at the online manual put it right, there shouldnt be a problem setting it up again, good luck

Posted on Aug 05, 2009

Ad
  • 2501 Answers

SOURCE: no instruction book

The Kenneth Cole web site does not offer any downloads of instructions for watches, so I suggest that you go to their web site "kennethcole.com".

Select "find a store" (at the bottom of the page) and contact them to see if they can help you.

Good luck!

Posted on Jan 19, 2010

cmcduncand
  • 714 Answers

SOURCE: on time atomic watch wrong time zone

The EXSV10 Atomic Talking Watch by On-Time sets itself to the official time standard of the United States government, maintaining split second accuracy. It can also literally "tell" you the time. It talks! The On-Time talking atomic watch also has daily alarm capability, and can be set to announce the time every hour.

http://world.casio.com/wat/download/en/manual/

Use the four numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps

R/

David

Posted on Feb 24, 2010

  • 1 Answer

SOURCE: Silicon Scientific Radio Controled Watch

how to change hour number for setting clock back

Posted on Nov 16, 2010

  • 5370 Answers

SOURCE: I have a Casio 4304

It can be signal issue.Or you can try setting it manually, if its set on auto mode. Click this link directly,this is direct link for casio 4304 watch manual.:--- http://www.biro.ro/data_files/product_documents/file_83.pdf ------------ On page number 3 of the manual, there is procedure given to set the watch . --------------- this will help.Thanks.Helpmech.

Posted on May 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can i get a replacement battery for a Ohsen wr30m Watch?


In order to help people set the ohsen sport watches easlier in the right way, our company (www.360sportwatches.com) write the ohsen watch manual instruction in English for all the ohsen watch users, hope this page is useful for you to set your ohsen watch, this ohsen watch manual operation is suitable for almost all the Ohsen digital electornic watch, also it is suitable for the ohsen analogue quartz digital electronic sport watches, for details ohsen watches models, please have a look at the following content!



Ohsen watch manuales instruction description:

A Key = Light

B Key = Mode

C Key = Start

D Key = Reset



In normal time to show, press the button to enter B mode, click Settings when choosing D Key respectively, minutes and seconds, C key to adjust.

Hours, minutes, seconds, month, day, week;

12/24 hour clock selection



* Daily Alarm Clock

Daily alarm only " Hours" and " Minutes" to choose

The whole point timekeeping



* Running Seconds

From 0.04 seconds start running time;

The Longest 23 hours 59 minutes 59 seconds



* EL black light

Any mode, press the A light EL backlight for 3 seconds



* Use 3V batteries



Running Second Mode:

Press B button click into the race second mode, press the C key to start timing, the timing of the state, press the D key to pause time;

At the time of state, then C key, stop the clock, press the D key to this state would be zero time.

Press B button to return to normal time mode;



Alarm setting mode:

Regular time mode, press the B button 2 times into the alarm set;

Press C key to the "alarm" whole point of time" to set " open" and "off";

Press D key to adjust the hours, minutes;

Press C button to adjust the number of selected;

Press B tutton to return to normal time statues.

At the same time in any state, this button will issue a Bi Bi sound;



Time, date setting mode:

In normal working mode, press the B button 3 times to see the second in the flashing, then press the C key, " seconds" will be zero;

Press D key to select each "Hour" " Minute" " Day" " Week" set;

Press C key, you can adjust the number;

Press B button to return to normal time status;



12/24 hours;

Under normal travel time; Press B button 3 times to enter time setting mode, then second in the flashing, second place in the transferred into " H" when the table show has been converted to 24 hours system; when the position becomes"O" on the afternoon of adjustments; seconds into "R" for morning; "P" for PM.

Apr 01, 2015 | Watches

1 Answer

The brand new Casio watch Module No. 2747 does not allow the analog time to be decreased! I've reset the digital time to the present time. When I try to reset the analog time (watch hands) I cannot turn...


Assuming all Casio models have the same mode of operation, try this:-

Press the mode button until you see "HS" on the display (hand setting) and then use the 2 and 4 o'clock buttons to adjest the hands.

If this does not work and you do not have the manual for your watch,you can get
instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

y

Dec 23, 2010 | Watches

2 Answers

I bought the water resist watch from walmart this evening it doesnt have a name brand on the watch but i think its a casio but it didnt come with the instructions on how to use it, the number on the back...


Thank you for contacting FixYa.
  • There should be four buttons: mode, reset, start and light. Find the mode button and press it three times until it is in the set time mode.
  • 2 Find the reset button, which usually is located on the bottom right side of the watch face, and hold it until the time starts blinking.
  • 3 Press the start button to change minutes.
  • 4 Press the reset button again to switch to hours. You will know it worked when the hour starts blinking instead of the minutes.
  • 5 Press the start button to change the hour. The watch can handle two modes: standard and military. As you press start, the hour will change from AM to PM, noted by an "A" or a "P" in the top right. When you get through 24 hours, the watch will change to military time and an "H" will be displayed instead of "A" or "P." Keep pressing start to go through another 24-hour cycle and it will revert back to standard time.
  • 6 Press the reset button to switch to the date, starting with the month, and press start to change it.
  • 7 Press reset one last time to switch from month to the day, and again press the start button to switch days.
  • 8 Press the mode button to finish the changes.
  • Sep 14, 2010 | Watches

    1 Answer

    I have a Nexxtech Watch that is both digital and hand driven. I have somehow switched the regular time to a 24 hour clock and don't know how to switch it back. The manual says nothing about it. Any help...


    These basic instructions are for most digital watches (and these are for regular to military but you can just follow same instructions to get to oposite) Hope this helps!
    1. Press the "MODE" button---usually on the lower left side of the watch, but sometimes on the right center side---to cycle through to the time display.
    2. Press and hold the "SET" button---usually on the right lower side of the watch---until the seconds flash.
    3. Press "MODE" repeatedly to cycle through the displays that flash: from hours to minutes to month to date and day. At the end of the cycle is the hour display option. Make this option flash.
    4. Press the "SPLIT/RESET" button below the face of the watch to change the hour display option to "24-hour display." This is the same as military time. If there is a "NEXT" button on the upper-right side of the watch, use this to advance to the 24-hour option instead of using the "SPLIT/RESET" button. You may need to press a "START/SPLIT" button instead a "SPLIT/RESET" button to cycle between 12- and 24-hour display. The "START/SPLIT" button could be located below the watch face or on the upper-right side of the watch, depending on the model.
    5. Press the "SET" button again. You are now done. All PM hours should be displaying hours between 12 and 23.
    jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });

    Aug 21, 2010 | Watches

    1 Answer

    I am trying to set a digital watch, there are 4 buttons 1=light 2=mode 3=start&stop 4=lap reset. I can not find the name brand and I bought it at a second hand store for my grandson. The only name I...


    mcdevito75here, I'm sue I can help you set this digital watch,----4 buttons, 1=light, this should be just for the light built into the watch, 2=MODE this is the button you press to set the functions, press this button and see everything flashing 3= Start Stop this button should act as set after you press MODE it should also be to start the lap counter and 4= lap reset this should bring the lap counter back to zero or the seconds tick normally.---- press MODE see everything flashing, then press start stop to set functions, hour, minute etc, press MODE after you have set each function, hour, minute, etc. When done with all functions press mode again to bring the watch back to normal operation.

    Jun 23, 2010 | Watches

    4 Answers

    I have a Starter Brand Watch that did not come with a manual. I can't seem to get the chime to stop chiming on the hour.


    Just bought a STARTER Sport Watch Model# STW14 @Walmart

    TO CHANGE TIME:
    1. Press and release MODE button quickly 3X in a row(top middle no.(Seconds will flash)& change Seconds by pressing START button 2. Press & release RESET button 1X quickly(Minutes will flash) & you change Minutes by pressing START button 3.Press & release RESET button 1X quickly(Hour will flash) & you change Hour by pressing START button. 4.Press & release RESET button 1X quickly(Date will flash) & you change Date by pressing START button.5.Press & release RESET button 1X quickly(Month will flash) & you change Month by pressing START button 6. Press & release RESET button 1X quickly(Day of week will flash) & you change Day by pressing START button 7. Press & release MODE button 1X quickly to return to Normal use
    TO SET ALARM: 1. Press and release MODE button quickly 2X in a row(Hour will flash)& you change Hour by pressing START button 2.Press and release RESET button quickly 1X (Minutes will flash)& you change Minute by pressing START button 3. Press & release MODE button 1X quickly to return to Normal use
    TO VIEW MONTH & DAY: 1. Press & Hold START button 2.Just Release START button to return to normal use.
    TO USE STOP WATCH: 1. Press and Release MODE button quickly 1X 2. To START stop watch: Press START 1X quickly 3. To STOP Stop watch: Press Reset button 1X quickly 4. To RESET Stop watch: Press & Hold START button and press RESET button quickly @ the same time, 2X in a row 5.Press & Release MODE button 1X quickly to return to Normal use

    Sep 12, 2009 | Bulova Watch

    4 Answers

    Military Time


    Hello I have the same watch and had the same problem. You press the mode button till you get to the point to change the main time, you then press the reset button (bottom button on right side of the watch)to toggle to the hour place, you then cycle thru the time untill the "h" in the top right hand corners disappears and then the watch will be back on regular time.

    Chris

    Jun 17, 2008 | Bulova Men's Watch

    16 Answers

    Timex 1440 sports watch, WR50M


    In "Time Mode" when time is displayed, hold the "mode" button until the alarm flashes. Press the "mode" button again and the display should change to the seconds flashing. Press the st/stop button to change location between seconds, minutes, hours, date, month, and day. Use the lap/reset button to make any changes.

    Feb 15, 2008 | Timex 1440 Nylon watch

    4 Answers

    Klik radio controlled watch


    First, you need to set the hands at midnight. Press the upper button for 3 secs and let go. The hands will start to advance. Watch them, and when you are almost at the position of 00:00:00, press the upper button again briefly and the hands will stop. Then pulse the upper button to finish advancing the second hand to a perfect 00:00:00. Within 10 seconds, press the middle, knurled, button briefly (if you don’t, the watch will just to back to where it was). When you have done this, the watch will start to run (albeit at the wrong time).

    Now you need to tell it to set itself from the time signal. Press the upper button and the lowest one *at the same time* for 3 secs and let go. The watch will acknowledge your request by moving the second hand (only) to 12. Leave the watch somewhere it is likely to get good radio reception. In a few minutes, you will see its hands start to move to the correct time, and they will eventually get there and your watch will be working again.

    Nov 10, 2007 | Watches

    Not finding what you are looking for?
    Watches Logo

    Related Topics:

    53 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18407 Answers

    Ansel Alberto
    Ansel Alberto

    Level 2 Expert

    248 Answers

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Are you a Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...