Question about GE Televison & Video
Try this link - http://www.ehow.com/how_9190_program-ge-universal.html
Otherwise try Google. Good luck.
Posted on Feb 09, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I also lost the manual for my GE JC024 Universal Remote. I remembered though that you just hold in the button for the device you want to program and the "SETUP" button at the same time for about 5 seconds until the red light on the remote flashes and stays lit. then let go of the buttons.Then you basically just press and let go of the on/off button, pausing for a second or two in between presses until your device turns off. then you have to press the "ENTER" button and it'll store the code for that device. This method just cycles thru all of the possible codes for that device. sometimes you get the wrong code and the remote wont completely work. like hitting the volume button makes the tv mute for example. just repeat the steps until the device turns off again and eventually you should be able to get it. hope this helps.
Posted on Mar 04, 2010
From this website you can get the for your remote
follow the steps to set up the remote
Step 1: Press and hold the "SETUP" button until the red indicator stays on, then release.
Step 2: Press and release the desired Mode button (VCR, TV etc.). The red indicator will blink, then stays lit.
Step 3: Enter the 4 digit code for your device. After a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes!
Step 4: With your device on, press "CHANNEL UP" or "CHANNEL DOWN." If the device responds, no further programming is required. If some buttons do not operate your device, try one of the other codes for your brand. Note, when all codes have been searched the red indicator flashes rapidly for 3 seconds.
Code Search instructions
If your device does not respond to any of the codes listed with your equipment, or your brand is not listed, try the following steps:
Step 1: Manually turn on the device to be controlled.
Step 2: Press and hold the "SETUP" button until the red indicator stays on, then release.
Step 3: Press and release the desired Mode button (VCR, TV etc.). The red indicator will blink once, then stays on.
Step 4: Press the "CHANNEL UP" button repeatedly until the device to be controlled changes channel. The red indicator will blink, then stays lit.
Step 5: Press and release "MUTE" button to install the code. The indicator light goes off.
Posted on Jul 20, 2010
SOURCE: I have lost my manual
0049 0097 0110 0004 0268 0012 0108 0180 for your Sanyo.
You can download a manual from
Let me know if you have any other questions. Thanks.
Please rate this solution. Thanks.
Posted on Feb 02, 2011
Tips for a great answer:
Sep 18, 2014 | Televison & Video
Sep 08, 2014 | GE Remote Original Jc024 Remote Control...
Sep 07, 2014 | GE Remote Original Jc024 Remote Control...
May 10, 2014 | GE Remote Original Jc024 Remote Control...
Oct 08, 2012 | GE RC24914-E Universal Remote Control...
Sep 20, 2012 | GE Remote Original Jc024 Remote Control...
Sep 12, 2012 | Universal Remote Control GE174Universal...
Jul 30, 2011 | Universal Remote Control GE174Universal...
Jan 30, 2010 | Universal Remote Control GE174Universal...
303 people viewed this question
Usually answered in minutes!