Question about Whirlpool 24 in. ADP5966 Free-standing Dishwasher

1 Answer

ADP 7966 The F7 keeps flashing in all programmes, can't clear it. Any thoughts on what F7 is?

Posted by on

  • DAVID THOMAS Apr 16, 2009

    The F7 flashes, then works for a while when start button is held in for a few seconds, but does not finish the cycle.HELP...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I had the same problem. Indicator flashing. F7 displayed. Nothing seems to work.
The following worked for me:
Remove the filter on the floor of the machine, including the metal grill.
Press & hold the start button (like you do when you want to cancel a programme). this will drain the water out of your clogged up drain outlet. Clean your filter and grill and replace it.

My guess is that the sensor in the drain (a little glass tube) measures whether the water going out is clean enough to decide that your dishes are now rinsed correctly. If your filter's clogged, the water going down the drain is still dirty. After a while it gets sick of trying and stops the machine.
F7 in whirlpoolese may mean "Clean my filter now or you can wash your own bloody dishes"

Posted on Jun 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool adp 4404/5. Green light flashes 7 times !! Any idea ?


F7 - Flow-meter failure

Symptom: water inlet valve (WV1) is switched on and the water indicator (WI) is on (level reached).

Could be:
1. Water tap closed during water inlet
2. Water inlet hose blocked
3. Water inlet valve (WV1) defective
4. Flow-meter (FM) sends too few / much pulses (less than 10 imp.in 10 sec.)
Flow-meter counts wrong (or the sump is full in less than 30 sec. Causation: Hose felt down and slipped the disc of the valve. The effect is a displacement of the valve tappet).
5. Aquastop defective
6. Flow-meter defective

Dado


Jul 26, 2015 | Whirlpool Dishwashers

1 Answer

Why does my Diplomat ADP 8902 dishwasher beep twice when i switch it on and the 4th wash program light flash and do nothing else?


Can I say thank you for the above advice. Hit the programme button 4 times and closed machine. Now running rinse cycle. Let hope it works afterwards. Will post ant let you know.

Nov 20, 2010 | Dishwashers

1 Answer

How to reset the programmer on dishwasher


Disconnect power for longer than 45 seconds.

Sep 17, 2009 | Dishwashers

1 Answer

Whirlpool


you have a water count problem
or a wv1 problem ist easy to solve

Jun 11, 2009 | Whirlpool 24 in. ADP5966 Free-standing...

3 Answers

Dishwasher (Whirlpool ADP 952) not working


I have a whirlpool ADP 952 and the start button is flashing and it won't work

May 25, 2009 | Dishwashers

1 Answer

My dishwasher model adp 941 won't start - start led flashes


exactly the same problem today with an AD9520

Don't know the cause but from reading other posts re dishwasher problems I tried holding start but on for 5 - 10 seconds and it seemed to clear the symptoms at least. It ran for a short while and stopped but the flashing had stopped and I could start a wash cycle which is now running!

Dec 14, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Cycle seems never-ending


on the ECO 50 cycle dish washer will not stop. have had to switch it off, when try to restart it automatically goes back to the ECO 50 programme. Can you please help. The Serial No. is ADP 2440 WH.

Nov 24, 2008 | Whirlpool 24 in. ADP5966 Free-standing...

1 Answer

I have a Diplomat ADP 8520 dishwasher (possibly SMEG manufacture) which will not stop trying to empty. There are 4 leds lit reading left to right and it beeps. I have read on some forums about pressing the...


fault is probably water in the bottom tray operating the anti-flood device. take bottom front panel off and mop out the water and it will work. if fault reoccurs then you have a leak

Nov 05, 2008 | Dishwashers

1 Answer

Whirlpool adp 8540 - 7 flashes


replace the control board in the console

Apr 10, 2008 | Dishwashers

Not finding what you are looking for?
Whirlpool 24 in. ADP5966 Free-standing Dishwasher Logo

Related Topics:

721 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...