Question about Sewing Machines

1 Answer

9960 will not run with foot pedel

Quanton 9960 singer. The lights are on but the machine jamed and foot control and manual control will not start motor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sewing Machines Master
  • 7,365 Answers

Why did the machine jam? did you try turning it off & waiting a few seconds then turning it back on.

Posted on Feb 08, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1788 Answers

SOURCE: Singer sewing machine will not operate. push foot

Make sure that your bobbin winder is pushed all the way to the left (sewing position) and that you have selected a stitch pattern and the length is not on zero.

Posted on Dec 14, 2010

  • 185 Answers

SOURCE: SINGER IZEK MODEL 1500

The Izek has a motor over current protection circuit which measures the currend draw at the main motor. If the main motor is trying to run and it draws more current than it should the machine will stop sewing. In sew speak terms the machine is too stiff to turn easily. There are 2 different solutions. Completely lubricate the machine anywhere metal is on metal use oil (sewing machine) and metal on plastic or platic on plastic use white lithium grease. Try the machine now!
Next if that did not fix it make sure there is no lint, thread or the like wrapped around andy parts of the machine. Good luck

Posted on Mar 04, 2008

  • 323 Answers

SOURCE: SINGER LIMITED EDITION-MODEL 6268

More than likely you need a pneumatic transducer. It's the part that your air tube connects to and that is what actually makes your machine run.
sewman7

Posted on Oct 25, 2008

  • 35 Answers

SOURCE: How to attach Singer Free Motion/Darning Foot to Singer 7442 machine?

To learn the skills to repair sewing machine by yourself, I suggest you to order the following product:
Sewing Machine Repair Guide
It's a professional step-by-step repair guide written by an expert. Besides Singer sewing machine, you can learn how to repair other brands of sewing machine as well. The author claims that you can earn money after you had learned the repair skills!
Good luck.

Posted on Sep 08, 2010

  • 1788 Answers

SOURCE: Singer Stylist 834

It needs a good cleaning of lint, thread etc. take your bobbin case out and make sure that there is nothing in there. DO NOT TURN YOUR HAND WHEEL BACKWARDS! It will mess up your timing. If you cannot free it up take it for service

Posted on Sep 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, My Quantum 9960, needs the bobbin refilled, but the machine shows me an icon of the foot paddle, then an icon of machine and conect? cord. The cord is connected, I've tried it 3x. Don't know what to...


Is there an up arrow in the icon you see? What you describe could be the Release foot controller pedal icon. Take your foot off the foot pedal. See the trouble-shooting page on page 102 of the manual. The manual is available from Singer here: http://www.singerco.com/uploads/download/5b9200a32cfd31ffc30b8d29fd195a57dff4a9e3.pdf .

You are supposed to take your foot off the controller (or press Stop) after winding a few turns of thread on the bobbin. Trim the excess thread above the bobbin. Then step on the foot controller or press Start. Release the foot pedal again when the machine stops winding the bobbin. See page 28 of the manual for the procedure.

I hope this helps. If you do not have the Release foot controller icon displayed, please add a longer description of the icon or indicate which icon from the trouble-shooting section of the manual that is closer to the one you see. If you have released the foot controller and the icon persists, then something may be wrong with the control pedal. A replacement control pedal is ~$35; see http://www.sewingpartsonline.com/singer-9960-quantum-stylist-parts.aspx .

Cindy Wells

Jul 21, 2017 | Sewing Machines

1 Answer

What is the roller foot product number for Singer Quantum 9960


If you purchase a low shank presser foot, it should work on your machine. Just verify that it has the same shank as your other presser feet.

Roller Presser Foot Low Shank 151

May 16, 2017 | Singer Sewing Machines

1 Answer

I just purchased a Singer 9960 and I cannot get the satin presser foot to lock in. I've gotten the other ones to work just fine, but that one will just not lock in.


Well, my first reaction is that the foot is defective. They are not very expensive; you can get one on eBay or Amazon. Your machine takes a low-shank foot. You might also decide to purchase one with a shank, instead of the snap-on that you have.

Mar 16, 2017 | Singer 9960 Quantum Stylist Sewing Machine

1 Answer

What is the most likely cause of a Quantum 9960 that powers on but won't start? Both foot pedal and button tried a few seconds after each hear a beep and screen says to release button/pedal.


could be the foot pedal is not making the right contact
could be a computer problem
or a motor problem
if the problem persists, having the machine checked would be a good idea

Mar 03, 2016 | Singer 9960 Quantum Stylist 600-Stitch...

1 Answer

Foot pedal


Sounds like you need a replacement. You can get one from eBay, just do a search on your machine number.

Sep 01, 2014 | Singer Sewing Machines

1 Answer

SINGER 9960 Quantum Stylist 600-Stitch Computerized Sewing MachineWhat's your problem?


once it jammed it jammed the gears inside also, witch maybe plastic.
If thats the case it maybe toast!

Jul 15, 2012 | Sewing Machines

1 Answer

I have a 9960 singer machine and am trying to use the buttonhole presser foot for the first time and I can not get it to sew T


the buttonhole foot snaps on to the presser bar, there's a little lever at the back of the presser bar that releases the foot, then put the buttonhole foot down on the needle plate & use the presser foot lifter (number 11) to lower the presser bar down onto the buttonhole foot & you'll hear a click sound when it snaps on & make sure to use the buttonhole lever(number 31) because the machine won't sew a buttonhole unless that lever is pulled down.

Apr 26, 2012 | Singer Sewing Machines

3 Answers

Just purchased a singer Quatrum from hsn 9960 style i need exact instructions on bobbin winding a video maybe


Hi you can download a free manual from Singer.
http://www.singerco.com/accessories/manuals.html
Just type in 9960 in the search box and click on search.
It should give detailed instructions on winding a bobbin.
If this does not help, try this video from youtube:
http://www.youtube.com/watch?v=DlrTnW_FUqA

Aug 31, 2010 | Singer Quantum 9940 Computerized Sewing...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...