Question about Kenmore Dryers
I bought a second hand Kenmore H2 dryer and the seller "forgot" to tell me it was converted to propane. How do I convert it back to being a gas dryer? Will this be costly? The model # is 110.96562500
Contact Sears with the model number and they can provide the parts and instructions, it will not be more than $25.00
Posted on Feb 07, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have an old Kenmore dryer that I need to convert from LP to gas. I have the parts but no instructions. Can you please help?
Thank you, Roxanne
Posted on Oct 13, 2008
Typically, conversion from natural to propane and visa-versa is just a simple connection behind the appliance. Look in the box of the conversion kit (or on the back of the packaging,) and you should see the conversion instructions. Since you are dealing with gas, you need to make sure the shut-off valve is... shut off so no gas can leak while do the exchange. Also, make sure there are not open flames anywhere near the work area. Take your time and follow the directions...
Posted on May 25, 2009
SOURCE: dryer has been converted to propane using conversion kit #131776600 and I need the info needed to get it back to run on NG The dryer is a Fidgaire Gallery series model #FDGC648GHS0 any help greatly a
Hello there. If the parts were saved, they can be reused. If not, contact your propane provider and tell them that you plan to convert back to natural gas. They will be able to get you the kit you need, and will possibly have a technician come out and install it for a fee.
Posted on May 27, 2009
I purchased a Samsung steam gas dryer and found that no one in our area knew anything about them, Fortunately I am a gas tech. but have never worked on this brand. The first thing is you should always use a gas technician before doing this. Secondly turn off the gas and electricity. You must remove the two screws from the back that hold on the top of the appliance and set this aside. Then lift up the front electronics and disconnect the wiring harness, once you've done this there are 5 screws along the top of the silver strip or door area. This will alow you to lift up the front and disconnect the wiring harness and set aside. now you can follow the instructions on converting your dryer. PLEASE check for LEAKS and proper gas flow. Follow the same steps in reverse to put the dryer back together and happy drying.
Posted on Jul 01, 2009
I have a whirlpool dryer as propane and needed it converted to gas. I have the orifce -gas kit which consist of two parts. Which part do I use? Is it the one which screws in and mist hole is on the other end, or the other one it comes with that has the mist hole on the other side.
The one i placed was the later ( one with mist hole on the side)
Posted on Aug 02, 2009
Tips for a great answer:
Jan 13, 2013 | GE GFDS350GLWW Dryer
Sep 12, 2010 | Kenmore Elite HE4 Electric Dryer
Jul 17, 2010 | Kenmore 73952 Gas Dryer
May 07, 2010 | Kenmore 73952 Gas Dryer
Sep 27, 2009 | Kenmore Kitchen Ranges
Mar 13, 2009 | Kenmore Dryers
Mar 12, 2009 | Kenmore Kitchen Ranges
Mar 06, 2008 | Maytag Neptune MCG8000AW Gas Dryer
Dec 08, 2017 | Kenmore Dryers
160 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: