Question about Beko Washing Machines

4 Answers

How to reset or unlocked the beko washing machine timer

My beko washing machine is like paused or locked the washing timer

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My washing machine time delay switch is flashing and I can't turn the machine on what do I need to do?

Posted on Sep 05, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Beko Master
  • 76,164 Answers

Try unplugging the machine for 5 minutes, if that doesn't reset it you likely have a defective main control circuit board.

Posted on Feb 07, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Just tried the reset method on beko wm140w thanks for the info works a treat

Posted on Jul 09, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The BEST solution is:AVOID IT LIKE A PLAGUE.This i biggest rubbish there is on this planet.
Michael

Posted on Jan 12, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 269 Answers

SOURCE: How do you reset a

It's actually pretty easy. Try this: press and hold the start button in for 5 seconds.drain pump will start up.let it complete its routine (takes 2 mins or so).now the machine has reset.select program as normal and retry
Hope this helps

Posted on Dec 26, 2010

  • 44 Answers

SOURCE: beko wma641w reset

hi
to reset these al you do is press and hold the start button for about 5 seconds then it should reset if not then you have a faulty pcb

regards

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: unlock control lock in washing machine, whirlpool, duet

my whirlpool heaavy duty 9Kg is locked so I can't unlock it, I need help please

Posted on Aug 22, 2010

catriver
  • 878 Answers

SOURCE: I can't unlock the door

fencer, you probably have a bad door lock switch. There was a technical bullitin out by Maytag regarding this (TS740). The deal is that the plunger of the switch is depressed but the contacts don't close. The machine control board senses the door is not locked and won't send the signal to unlock it. You can try to put the machine in the service mode by pressing delicates and heavy soils together for 3 seconds. Advance to the board output tests by then pressing rinse. After that press the max extract key to lock the door and the xtra rinse key to unlock the door. See if it works for you. You may want to call Maytag and inquire about the service bullitin, maybe you can get it covered. There is a manual door release in the dispenser section. The pull tab should be toward the front. You may have to remove the screws and remove the dispensor to get at it. Catriver...post back.

Posted on Oct 20, 2006

  • 1 Answer

SOURCE: beko wm6152w turn machine on

try holding the start/pause button in for five seconds, hopefully it will restart

Posted on Aug 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aa class beko 1400 rpm in black...my washer has been fine until today...it did a wash and spun fine...then wouldnt unlock it just kept making a noise (like it was just about to start a cycle) for bout 4...


Try pressing start pause and cancel at the same time. This is the way to overcome a Beko door lock power problem. A bad sound suggests the belt has broken, and that can only be replaced by a technician

Mar 17, 2014 | Washing Machines

1 Answer

Beko washing machine wme7247w showing E08


Beko Washing machine? What is that a French Model? LOL
Your water inlet valves (hot/cold) are bad and need replacing.

Jan 19, 2014 | Beko WME7247W Washing Machine

1 Answer

Unlocking sharp


These machines are set that way. Once started, even if you stop it you have to wait for a timer to unlock it which takes about 3 minutes.

Jun 30, 2013 | Washing Machines

1 Answer

Door lock is on and dont know what button to make it go off


If you can't pause the machine by hitting start and have it unlocked, turn the washer off then try unplugging the power cord, waiting a few minutes, and then plugging it back in. It should reset the lock timer.

Apr 18, 2011 | Frigidaire Washing Machines

1 Answer

I have a Beko washing machine wm 71275 that keeps going on to pause during a wash.


hello. typically when this happens you have to replace the timer.

Nov 23, 2009 | Washing Machines

2 Answers

Beko 520w wasing machine


Hi see the last video on this it will show you test mode or if your beko wma10w washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Mar 08, 2008 | Washing Machines

2 Answers

Washing machine


Ha Ha , It was very simple and all you have to do is ............................hold the start button in until the timer reset's it's self. Which on a beko wma 765w washing machine the button look's like a play / pause button from a stereo...

Dec 28, 2007 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

9,737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Beko Washing Machines Experts

Tom Chichester

Level 3 Expert

34789 Answers

J D Wright

Level 3 Expert

409 Answers

 Russ Hill
Russ Hill

Level 3 Expert

3187 Answers

Are you a Beko Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...