Question about Televison & Video

1 Answer

Lost my controller for my duraband ptv7017 and can't select the av chanels. How can I do this without the controller ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,211 Answers

Hello
Without its remote control, you can't select its AV channel. Just try to get a new remote control or buy a universal remote control, which have setup codes for Duraband Tv with it.
Setup codes for Duraband are:
0189 0135 0157 0153 0254 0458 0217
Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Posted on Feb 08, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 273 Answers

SOURCE: How do you change the chanel to AV without remote, dont give the option on the tv buttons

check the website for the remote you have bought and enter the codes for newer models of your make of tv keep trying 1 of them should work but might not give you all functions like teletext

Posted on Jun 03, 2009

kb8dns
  • 494 Answers

SOURCE: TCL 21K77 Problem with TV/AV without Remote Control

You may have to find a direct replacement for the remote, no real solution.... Let me know the brand....

Posted on Feb 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change chan to av without the remote


Write your answer...if they is no av boten on the tv ,press the chanel boten -to 0 for av

May 29, 2015 | Televison & Video

2 Answers

I need to get to av without a remote control


Sorry I can't tell by the video but on the side is ther a menus button? And if ther is push it and go to the channel selection or add/remove channel or where u see a place to do a auto detect.. Once there u should see a add selection and u can add channels manually with the + - buttons as up and down u should be able to add the av to the section list or it will just let u select that Chanel and exit the menu automatically.. Or u can get a universal remote pretty cheep prob like 5 buck at Walmart and do it that way or if u have cable or dish that remote will program as well.. Good luck

Jan 15, 2013 | Televison & Video

1 Answer

Lost remote for ferguson ftv 280n can i get AV channel without it?


put a dvd on the tv and it will automatick change the chanell gor you

Dec 09, 2012 | Televison & Video

1 Answer

Can i use a dvd player with my duraband tv


If there is AV in socket, either at the front panel or rear side of the TV, you can surely use it with a DVD player. Just connect the tV with DVD player using an AV cord [can be bought from electronic spare part selling shops at your town]; and select the input to TV to AV. Picture of AV cable attached.
5_19_2012_9_09_57_am.jpg

May 18, 2012 | Durabrand DWT1304 13" TV

1 Answer

Iv lost the remot for my nec cromavision flat tv and the child lock is stuck on


Just check an other code from the remote catelogue for NEC. Some codes might not work all the functions to TV.

Mar 30, 2012 | Televison & Video

1 Answer

How do you change the chanel to AV without remote, dont give the option on the tv buttons


check the website for the remote you have bought and enter the codes for newer models of your make of tv keep trying 1 of them should work but might not give you all functions like teletext

Jun 03, 2009 | Televison & Video

1 Answer

Don't have manuel and don't know how to Set up Hitachi VCR


Such a simple job. First check if the cables are connecred properly
1. Audio OUT from VCR to AUDIO IN of TV.
2. Video OUT from VCR to VIDEO IN of TV

Then switch the TV ON. Select 'Video' on the TV/Video
selection button on the TV's remote control.
Your TV screen will show a display like 'Video' or 'AV'
Play a cassette and you should be able to see the picture...
Happy Viewing.

Apr 01, 2009 | Televison & Video

2 Answers

Needing code for radio shack 15 2147 for a duraband tv


Check this link on OwnerIQ

http://tv.manualsonline.com/ex/thread/view/idThread/57583

You may have to register to get it

Mar 09, 2009 | Radio Shack (15-2147) Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74211 Answers

Cindy Wells

Level 3 Expert

5125 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...