Question about Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140

1 Answer

Drill chuck removal

I am trying to get the chuck off my drill and have removed the screw. Does the chuck screw off and do you need a special tool to remove it. Is it right hand thread or left?

Posted by on

  • Anonymous Mar 28, 2014

    ican not remove chuck from my delta mortiser is it a left or right hand thread

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 99 Answers

The screw should be left hand thread and the chuck is normal thread. The 'workshop' way to remove the chuck is to remove the screw (done). If the jaws are still working then clamp a sturdy allen key in it and whack it against a workbench to unscrew the chuck. If holding the drill in the normal position you would stand with the workbench to your left and whack it down on that. If the jaws aren't working then you can grip the body in a vice and use large pipe grips or stiltsons on the chuck. Also check to see if the chuck spindle will accept a thin spanner to hold it, as this is a slightly more caring way to brace the spindle. Then you can can hold the spanner in the vice and use the allen key in the chuck and unscrew it that way.

Posted on Oct 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dewalt dcd950 chuck


Its is about a 2 years modified the XRP chucks In Netherlands the model 950 is not QS made for europe but all the XRP machines have had a special solide looking Chuck For the original Chuck there was a special tool to remove the chuck the gearbox must be open to and a special N119912 a complete unit of repair tools to remove the chuck and replace , BUT the new modificated repair is by get a normal standard keyless chuck , asked them for about the modification because of the older repair tools and chuck http://www.2helpu.com/world/map.aspx it's about much more cheaper to choose for modification the N119912 is possible renumbered thats possible the right same tool because of the model DCD 950 is not selled in Netherlands . the DCD945 instead of but it means the same kind of modification .

May 29, 2014 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

1 Answer

Aeg chuck 18 volt


yeah, you'll need to replace the chuck. to remove the chuck generally takes a special tool.that fits between the drive and the chuck, that keeps the drive from spinning when you unscrew the chuck, this tool varies by manufacturer,

Oct 21, 2013 | Drills

1 Answer

Removel of chuke


Open your chuck as far as it will go and look inside. If you see a screw go to www.ereplacementparts.com/article/890/How_to_Remove_a_Drill_Chuck.html for a good how to on this.

If there is no screw inside the chuck you have to take the drill to a Dewalt service center and have them remove it. It takes a special jig to remove it and I don't think you want to spend over $200 to remove one chuck. Do not try to use the taper-fit tool on a cordless drill, they do not use the taper fit chucks.

Sep 09, 2010 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

1 Answer

Drill chuck removal


Look down into the chuck and you will see a screw. It must be removed so that the chuck can be pried off. It should be righthand(standard thread) lefty loosey. An impact driver is my favorite tool for removeing the screw, as you must not strip it or you will have to drill it out. Once the screw is removed, put the drill in a padded vise if one is available and do what is necessary to pop the chuck off. Something with enough width to span from the chuck to the drill body can be carefully driven between the two to break it loose.

Apr 04, 2010 | Dewalt 3/8" Electric Drill D21009

1 Answer

How remove the chuck on my milwaukee 2601-22


Most likely you need to open the chuck and see if is held on with a screw thru the center. If yes remove screw and turn chuck to remove.

Sep 18, 2009 | Milwaukee Tool Drills

1 Answer

Can't remove the chuck retaining screw.


Place drill in vice with chuck in vice facing up . Clamp chuck lightly but with enough force to hold firmly.
put allen wrench in chuck and lightly tap down to make good fit to allen screw head.Clamp chuck jaws down onto allen wrench lightly to hold wrench steady. Take piece of pipe to end of wrench,10".
These chuck screws are tight. Hammer clockwise until screw brakes loose.Open chuck completely and remove screw.Chuck is threaded to spindle shaft . Place allen wrench with long end facing out of tool in chuck and tighten chuck securely. With hammer tap allen wrench sharply counter clockwise ( normal thread.)

Jul 08, 2009 | Makita Drills

4 Answers

Removing the dewalt DC925 'rohm' chuck


I simply placed the chuck into a large vise and turned the drill counter clockwise and the chuck spun right off no problem without damaging anything!! It does have some thread lock on the chuck but just use your man strength and its as simple as turning the lid off the pickle jar! Do not waste your time or money with the removal tool...YOU DONT NEED IT!

Nov 24, 2008 | Dewalt 18 Volt Compact Drill Kit

1 Answer

Removal of chuck


this type of drill don't have any chuck screw in the center of the chuck.alos u need special jig to remove the chuck

Aug 11, 2008 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

1 Answer

Chuck Replacement


Hello Mike-To remove the old chuck, you'
ll need to open the jaws all the way and l;ook inside the chuck for a screw that holds the chuck onto the motor shaft. That screw has a reverse thread which means that you'll need to hold the chuck tight while using a screwdriver to turn the screw in the forward direction. After the screw is removed, p[lace a large allen wrench into the chuck and tighten it. Then using a hammer handle, rap the allen wrench in the reverse direction for removal. Then call Alltrade Tools @ 1-800-423-3598, give them your model number so they can provide you with a replacement chuck.

Jul 31, 2008 | kawasaki 19.2V 4 Piece Cordless Tool Kit

Not finding what you are looking for?
Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140 Logo

930 people viewed this question

Ask a Question

Usually answered in minutes!

Top Makita Drills Experts

John Trevino

Level 3 Expert

1378 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...