Question about GoVideo R6750 DVD Recorder

Open Question

R6750 DVD Recorder

I have never set up the GoVideo recorder since I have owned it. I have tried unsuccessfully on an RCA TV/DVD combo but couldn't get the TV to change to "LINE," so I took the DVD recorder into my bedroom to hook it up to a TV that was set up to turn on to "LINE" by DirecTV. I have three TVs, all of them are old. I bought the place I'm living in furnished, so I don't have any of the manuals for them. I successfully went through the entire setup for the DVD recorder using the TV in the bedroom, but when I pressed the Open/Close button, the DVD recorder did not open. I never plan to record anything from the TV so I completely disconnected the TV from the DirecTV box. I only want to copy VCR tapes. I have the manual for the GoVideo DVD recorder so I think I will be able to figure out how to copy my tapes if I can get the DVD recorder to open. Please Help!

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: govideo r6750 stuck tray

my 10 year old nephew forgot to take a disc out and inserted another this stopped the tray from opening i had to undo the screws holding the cover and remove them .Good luck p.s. don't forget to unplug firse

Posted on May 21, 2008

Ad

SOURCE: GoVideo VR3845 Replacement DVD Drive

My model is vr3845 some parts are missing , because of that i can not use the video. Where can i get the part?


My zipcode is 10037

Posted on Jul 13, 2008

  • 1 Answer

SOURCE: GoVideo Go Video VR3840 DVD Recorder+VCR rejects VHS C adaptor

tape ejects all the time when inserted

Posted on Jan 19, 2009

  • 1 Answer

SOURCE: Timer recording on GoVideo VR2940

First, you need to have the cable directly input into the recorder.

If you only plug the cable box into the machine, you get what is happening now.
After splitting the cable, one side into te box and the other into the recorder, run the channel seek part of the program and it will scan all the channels available on the cable and place them in memory.

Then plug the output of the cable box into the other input on the recorder, and you get yor pay channels and upper tiers.

Your recorder is now a switching unit as well

Woody Woodcasters@hotmail.com

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you record from my tv and what channels will I get?


Has this ever worked?

When you mention channel I assume you mean the channel on your TV set. Normally an S-Video input will be an aux input channel and not a numbered station on your set. How do you select the player chanel/ input when you watch the DVD?

Is the arial connected to the PVR then to the TV or direct to the TV It needs t pass through the PVR.

Jun 24, 2014 | GoVideo R6750 DVD Recorder

1 Answer

Need a new power cord


Tv repair shops carry a large selection of power cords, also Radio Shack.

Feb 08, 2011 | GoVideo R6750 DVD Recorder

1 Answer

Where do i find users guide for R6750 Dvd Vcr recorder by GO Video


This was very difficult to find, but I found it just for you! Please make sure you rate my answer 4 thumbs up! Thanks so much for understanding, it would be a huge help to me. Here is the manual / guide:

http://micromatikal.dlinkddns.com:8000/cust/R6750.pdf

Sep 06, 2010 | GoVideo Go Video DVD/VCR Combo

1 Answer

Need codes for Go.Video remote control


Go video remote for dvd/vcr recorder combo; you program TV by 2 digit codes. press TV power down when TV is powered on; and input 11 for JVC TV, or 03 for GE TV. You can experiment any two digit codes until TV shut down, then you have just finished programing n150b remote. This also work for all LG dvd/vcr combo recorder remote such as 6711RN203A..

Mar 08, 2010 | GoVideo Go Video DVD/VCR Combo

1 Answer

How record tv chanels using the DTV converter box? The converter box determines the chanel of interes while the DVD recorder must remain on chanel 3 in my area. My DVD recorder is a combo with a VCR...


Can you connect directly from the DTV converter to the DVD recorder input using RCA phono connector cables? You'll have to select the input on the recorder menu as well.

Oct 21, 2009 | GoVideo Go Video DVD/VCR Combo

1 Answer

Can't hook up video recorder looking for the owners manual


you can find the owners manual at retrevo.com. it's a free pdf download. good luck

Oct 14, 2009 | GoVideo R6750 DVD Recorder

1 Answer

R6740 dvd recorder


I tapped on the top of the machine and it opened

Oct 26, 2008 | GoVideo R6750 DVD Recorder

1 Answer

Govideo r6750 stuck tray


my 10 year old nephew forgot to take a disc out and inserted another this stopped the tray from opening i had to undo the screws holding the cover and remove them .Good luck p.s. don't forget to unplug firse

May 21, 2008 | GoVideo VR3845 DVD Recorder/VCR

1 Answer

DVD Recorder


sound like a micro glitch try unplugging the unit from the wall outlet and replug in after 30 sec.. should reset the system

Jan 17, 2008 | Televison & Video

1 Answer

Timer recording on GoVideo VR2940


First, you need to have the cable directly input into the recorder.

If you only plug the cable box into the machine, you get what is happening now.
After splitting the cable, one side into te box and the other into the recorder, run the channel seek part of the program and it will scan all the channels available on the cable and place them in memory.

Then plug the output of the cable box into the other input on the recorder, and you get yor pay channels and upper tiers.

Your recorder is now a switching unit as well

Woody Woodcasters@hotmail.com

Nov 19, 2007 | GoVideo VR2940 DVD Recorder/VCR

Not finding what you are looking for?
GoVideo R6750 DVD Recorder Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top GoVideo Televison & Video Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a GoVideo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...