Question about Epson Office Equipment & Supplies
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: epson stylus c45
I have the same printer.U cannot print without ink in all the crtridges.Yes i know thats bad new.Cant help it.So u gotta have a lil ink in all the cartridges to print anythin at all.
thank u guys...leave me a rating after u guys read this.
Posted on Mar 10, 2009
The simplest way to do this is to grab a copy of the A10_IPR utility that Epson distribute to their customers...
The utility is available to North American customers if you register no this site page http://www.epson.com/ipr/
The utility is also know to be available in the wild if you search for "waste ink ipr".
Just remember to scan any download using a virus and malware scanner before you attempt to use it as some utilities contain trojans or similar nasties.
Hope that helps.
Posted on May 12, 2009
Download the the driver again and reinstall it.
Posted on May 14, 2009
Usually when this happens the printer fails to goes through
the motions of the printing process, kind of stands still with indicator lights
just blinking away. This could be as a result of either of these scenarios.
i. Ink cartridge has developed incompatibility or is incompatible
The Solution is to try an older/another cartridge (doesn’t matter if ink is finished. You must replace cartridge one at a time). If lights stop blinking it confirms that your cartridge has become incompatible or developed incompatibility. Also if your printer is the type that can work with only one cartridge, remove one after the other (closing back the lid/cover) to determine which in the set (black or color) has become incompatible. At the instance the incompatible one is removed and you close the lid, the blinking will stop (for printers that can print with one ink cartridge only). Just replace the incompatible one and start printing again. In most cases the issue is always with one cartridge. But if both are affected, you have to replace both. Because of this type of problem, always keep used cartridges somewhere safe; they come in handy for this type of troubleshooting.
ii. The Cartridge electronic panel is dirty
The electronic panel on the cartridge that makes contact with the cartridge carrier inside the printer is dirty and needs cleaning. This electronic panel is front part of the cartridge with copper “dots”.
The Solution is to try to clean this panel with a piece of folded tissue paper soaked in a bit of methylated spirit. Also try to clean the area in the cartridge carrier/holder that makes contact with the cartridge’s electronic panel (Usually this is more difficult). If you cannot reach it with your fingers, use a stick or something with tissue wrapped around it. Allow to dry well and return the cartridges, close the cover. The blinking should stop if the electronic panel is the issue. Once the blinking stops the printer will print.
Posted on Mar 24, 2010
Tips for a great answer:
Aug 24, 2014 | Epson Office Equipment & Supplies
Oct 04, 2012 | Epson Stylus Multifunction Inkjet Printer/...
Jul 11, 2012 | Epson Stylus Office Equipment & Supplies
May 17, 2012 | Epson Office Equipment & Supplies
May 14, 2012 | Epson Stylus TX120 Inkjet Multifunction...
Nov 05, 2011 | Office Equipment & Supplies
Jun 30, 2011 | Epson Stylus Photo R300M InkJet Printer
May 30, 2011 | Office Equipment & Supplies
Jul 19, 2018 | Epson Office Equipment & Supplies
476 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: