Question about DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder

Open Question

Dish TV is in Black and white. What can I do?

My TV2 changes to black and white. what can I do to fix this?

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 374 Answers

SOURCE: DVR playback in color on TV 2 playback in black and white on TV 1

This is a receiver issue and will need to be replaced as the internal hardrive has an issue that cannot be resolved onsite by a technician. Thanks for using Fix Ya.

Posted on Feb 11, 2009

Ad
BeckiB_DISH
  • 286 Answers

SOURCE: I HAVE DISH NETWORK RECEIVER #322 AND ON TV 2 I

Hello! My name is Becki Barned, and I am from Dish Network customer service. The problem that you are having is simple to fix. Although your remote works for the volume, and power, it is not working for the satellite. It does need to be reprogrammed. Just take it to tv1. With your tv1 remote, press the menu button twice. Then with the tv2 non-working remote, hold down the SAT button until all the mode lights light up at the top, then release. Then press the #9 on the remote keypad, then the pound (#) button, then record (above the number 3 on the keypad) 3 times. This should resolve your issue!!! If not, you can blog back, or find us on Twitter!!!!

Posted on Dec 24, 2010

  • 374 Answers

SOURCE: Cannot access channel 73 on TV2

If you are unable to access the TV menu using the buttons on the TV itself it is possible you can with the TV2 remote if it still controls the volume etc. for this TV. If it doe not you will need to find a code for your set in the manual for the receiver or you can go to the following link to find that info as well.http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/receiver/625.shtml
Assuming you have control of the volume still press the small TV button on the top left of the remote. Now press the menu button and you may be able to access the TV's menu. If so you need to run a channel scan/auto program the TV. You may need to use the buttons on the TV still to maneuver through the menu.
If you are still unable to access the menu you may need to purchase a universal to access the menu.

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change one remote so It doesn't run both TVS


Dish Network TV 2 Duo tuner fix Dish 722 (877) 576-7100 ...

? 9:54
https://www.youtube.com/watch?v=e5154_wVkcc
Apr 7, 2014 - Uploaded by SilverStar Satellite Dish Network Retailer
On my tv 1 I keep changing it and it changes on TV 2 too so weboth watching .... My tv2 remote doesn't work for tv2 and whatever is being watched on ... To mirror tv 2 run a splitter offthe tv2 side of the diplexer as many as you ...

Jan 12, 2016 | Vizio Televison & Video

1 Answer

Dish remote 2 changes channels on both tvs and dish remote 1 changes channels on both tvs


Is the receiver in dual mode? Go to the receiver, open the door, and hit the mode key. If both TVs are still showing the same thing, then the issue is not the mode.

Go to TV 2 (the one without the receiver) and make sure the TV is tuned to channel 60 or 73. If it is still showing the same thing, go to TV1 (the one with the receiver) and hit Menu, system setup, Installation, modulation (menu 6-1-5). make sure the modulation for tv2 matches which channel you put your tv2 on.

Still showing the same thing? check the back of the receiver, the RCA cables (red/white/yellow) are plugged into the TV1 ports not the TV2 ports.

Showing different things but the remote still changes channels on both tvs? Go to TV1, hit menu twice, near the bottom there are two boxes each with a number. This is the address for each remote (tv1 and tv2). On the TV2 remote hold sat until it stays lit, choose a number different than on the screen, touch pound (#), the sat light blinks three times, hit record, the number on the screen should change to match the one you typed in.

Still being silly? Call a priest, you have a poltergeist!

Oct 24, 2013 | DISH Network IR Remote Control

1 Answer

I turned the living room tv on this morning and it is black and white and says no signal. The other tvs are working fine. I have turned it off and turned it back on still nothing


Hi my name is Mike Houston of DISH Network and I see youturned on the living room TV and it was black & white and had no signal.Depending if it's a Dual receiver and if the issue is TV1 or TV2 but there issome thing's you can check to make sure it is on the right channel. I will sendyou two links to help with the setup for both TV1 and TV2, if you have anymorequestions or concerns please e-mail me back at Michael.houston@dishnetwork.com;http://www.dishnetwork.com/SupportSection/bbs-screenand http://www.dishnetwork.com/SupportSection/black-blue-tv2.

Sep 04, 2011 | DISH Network 322 DTV Receiver

1 Answer

When I change the channel on tv2, it also changes the channel on tv1. I have changed the address for tv2's remote, but it still changes tv1's channel.


Hi my nameis Mike Houston of DISH Network and I see your TV2 changes TV1 as well, thereis an easy fix to this problem. You will want to make sure the receiver is inDual Mode and then make sure the TV2 connection on the back of the receiver isin the right port. I will send a link to help with these steps, http://www.dishnetwork.com/SupportSection/same-video-2-tvs.I will leave my e-mail if you have any questions Michael.houston@dishnetwork.com.

May 22, 2011 | DISH Network DVR-625 DTV Receiver /...

1 Answer

I have a Dish receiver 322. TV1 is set on channel 3 and TV2 is set on channel 116. Everything worked. We moved the receiver and TV1 into another room (right next door to where it was). We triple checked...


Hi hartbettinaI see where your TV2 has a blue screen, there are a couple of things you can doyou can do. The first things you want to do is press the buttons of MENU-6-1-5and see if TV2 is set to channel 60 or 73 and make sure TV2 is on that channel.Once TV2 is on the channel on the Modular Setup page you will want to unplugthe receiver for 10 seconds and plug it back in and it will reset itself. Iwill send a link that will help with these steps. http://www.dishnetwork.com/SupportSection/black-blue-tv2

Feb 27, 2011 | DISH Network 322 DTV Receiver

1 Answer

My DVR is recording programs I have not selected and programs that I have recorded are being deleted by User 2 when that TV is not on and the remote is stored in a drawer. I have change the channel for...


Hi, Cheri Torres with DISH Network Customer Service here. Icame across your post recently and wanted to see if I could help. It soundslike your TV2 remote is going to need to be readdressed. It could be possiblethat your TV1 and TV2 remotes are on the same frequency and remote address oryour TV2 remote may be on the same frequency as another remote in a nearby homeor apartment. I would like to list here for you the instructions on changingyour remote address so that it no longer experiences interference. This shouldbe an easy fix for the issue you are experiencing. I hope this works for youbut if it does not or you have any further questions or concerns about thisissue or any others feel free to email me at Cheri.Torres@DIshnetwork.com and Iwill be happy to help. :)
Instructions for readdressing TV2 remote

  1. Take TV2 remote to TV1 location (in front of the receiver)
  2. Go to System Info screen. You can do this by either pressing the system info button on the front of the receiver box or by pressing the power button once then the channel up button once on the front of the receiver. (You may need to open the little door on the front right side of the receiver box)
  3. Once you are in the system info screen you will see primary remote address(TV1) and secondary remote address(TV2). For your particular situation you will locate TV2
  4. Hold down the SAT button until all mode lights light up.
  5. Enter a number between 1 and 15 using the numeric keypad on the remote.Change the number to something different then what is already listed in the white square.
  6. Press the pound (#) button
  7. Once the SAT button blinks three times, press record. Note: If successful the number selected in step 5 will appear in the System Info screen under Remote Address.

Feb 10, 2011 | DISH Network ViP622 DVR DTV Receiver /...

2 Answers

I have dishnetwork tv1 reciever is fine and shows tv2 is working but cannot see nothing but a blue screen on tv2. Dishnetwork will come out for 95.00 but the last 2 times they were here(free of charge),...


We would be happy to help get that fixed right away. Thefirst thing we want to ensure is that all connected equipment is on.Wealso need to know what channel your TV2 is currently on, we will do this byturning the TV off then back on and noting the channel or input that appears onscreen when the TV is powered on, if the TV is not on channel 60 or 73, tune to60 or 73. Then Access "Modulator Setup"from TV1 by pressing"Menu", 6 for "System Setup", 1 for"Installation", then 5 for "Modulator Setup". Tune TV2 tothe channel that appears under "TV2 Out" on screen. If stillno picture and the mode for TV2 is "Cable", change it to"Air" and change the channel on your TV2 to 60, if it is already on"Air" then change it to "Cable" then change TV2 to channel73. If the issue is only on ONE receiver, unplug the DISH receiver for10 seconds and plug back in. The next thing we want to check is the connectionon the back of your receiver labeled "Home Distribution", this cablecarries the picture all the way to your TV2. Start by removing the connectionand screwing it back in, make sure all the connections going to your TV2 arehand tight. These steps should get your TV2 up and running.

We want to thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Oct 02, 2010 | JVC AV-27530 27" TV

2 Answers

TV or control doesn't work need help know


ok my tv is doing the same thing and i need help if you found a solution please email me at pieces41096@aol.com

Jul 06, 2009 | DISH Network 322 DTV Receiver

1 Answer

Remote on second t.v. not working


Lawrence, you have probably got a remote that needs the address changed. Go to the TV1 location and press menu-menu pn the TV1 remote. This will take you to the system info screen. Now take the TV2 remote and press and hold the SAT button on the top left of the remote until all buttons across the top light up. Now choose and key in a two digit number that is between 1-16 but is different from the number for the TV1 address and press the pound button. The SATbutton will flash three times. Now press the record button until the remote address for TV2 changes to the number you keyed in. Once this occurs you can cancel out of the menu screen at the TV2 location and go to TV2 and verify functionality. If this still has not resolved the issue try the remote for TV2 at the receiver location. If you have sucess here you will need to move the UHF antenna closer to TV2. If you need further assistance please let me know. Thanks for using Fix Ya.

Jan 21, 2009 | DISH Network IR Remote Control

2 Answers

My LG remote control turns two TV's on simultaneously


I had the same problem and we cut up a stick on lable and placed it over the end of the remote . It weakened the signal enough to where it would not change the other tv/tvs. We colored in the white lable with a black marker and you dont even notice it there.

It took alittle playing around with but it was much cheaper than buying a remote.

Dec 01, 2008 | LG Shine KE970 Cellular Phone

Not finding what you are looking for?
DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder Logo

Related Topics:

1,267 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

S. Gontko

Level 2 Expert

142 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...