An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
Re: F2 ERROR CODE
WHEN F2 FLASHES JUST PRESS START KEY U WILL RECEIVE A SUB CODE.IF SUB CODE IS 02 THIS IS TONER SUPPLY PROBLEM IF 04 THIS IS DATA PROBLEM LIKE AS IDENTIFICATION PROBLEM MODEL ERROR TYPE ERROR.BYMIAN AKHLAQ
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are several different F2 codes but from your brief description here's a solution:
Check the surface of the drum on the rear frame side. The sensor must be able to clearly detect the drum mark patch and compare it to the bare drum surface. Any scratches or damage to the drum surface or failure of the cleaning system will cause this error. If the drum surface is OK, the clean the Drum Mark sensor, re-seat all connectors between the sensor and the process driver PWB. Recalibrate the DM sensors using simulation 44-02 (press execute). If F2 error still occurs, replace DM sensor or the drum.