Question about Minolta EP1030/1030F CS/PRO Copier

1 Answer

How to use

Hello ,i have minolta ep 2030 and i want to know how i can use it photocopying in 2 side paper

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Does the copier have a duplexer? Automatic 2-sided copying (duplexing) was an optional feature for the EP2030. If there is a drawer in the lower section of the copier labeled "duplex" then your unit has this feature.

To use it, simply select 1>2 (for single-sided originals) or 2>2 (for 2-sided originals) on the "Orig>Copy" section of the control panel (toward the left side).

If your copier is not equipped with a duplexer, the only way you can make 2-sided copies is to copy the first side and then load the copies back into the paper tray or the manual bypass on the right side of the unit.

Note the the copier copies on the bottom side of paper fed from the paper trays, and the top side of paper fed from the manual bypass.

You can download a .pdf file of an operator's manual for this copier from the Konica Minolta website.

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Minolta EP 4000 always shows please wait after you photocopy two papers until you reboot it. and after rebooting it will still repeat thesame thing, how can i fix it please


Check fuser assembly, make sure the heater element is ok, if not replace. The thermal cut out shoul properly checked to ensure its normal characteristics.

May 30, 2016 | Konica Minolta Minolta Ep4000/ep5000...

1 Answer

Cspro ep 2030 minolta copying rough in the morning, but okay in the afternoon, solution please


Sounds like the warm up controls are not opperating properly. Or it is in a very cold environment. The "fuser" that provides the heat required to "glue" the toner to the paper may be defective, or the connections to it's controller or the controller is defective. Temporary solution may be to leave it "on" overnight to keep it as warm as it gets in the afternoon. Will take more electricity. But eventually it will need to be repaired, or replaced with a lightly used equivelent. It may be less costly than repair.

May 07, 2015 | Minolta Printers & Copiers

1 Answer

Minolta cs pro 2030 C00 CODE SHOW PLZ HELP


Missing two numbers on the end of the 00 is it 0070 or 0000?, 0000 is main motor drive 0070 is toner bottle issue.

Mar 03, 2015 | Konica Minolta EP 2030 3000 Toner 2-410...

1 Answer

My photocopying machine is sending me blank pages after photocopy


Minolta cspro ep 1031 My photocopying machine is sending me blank pages after photocopy

Jan 15, 2013 | Konica Minolta EP 2030 3000 Toner 2-410...

2 Answers

Where can I download service manual for Minolta pro ep 2030. Free if possible


i can download it for you send me an email to forward it to you

Jan 31, 2011 | Minolta EP1083 CS/PRO Copier

1 Answer

MINOLTA EP 2030 Photocopier


if it powers up and goes into rotation then the fuser is good. So check the machine for paper jams, toner,
does it give an error? is there a symbol light on?

Sep 09, 2008 | Minolta EP1030/1030F CS/PRO Copier

6 Answers

Meaning of code C04 ( EP 2030)


minolta cspro1054 turns off once you turn it on and code is c

Nov 15, 2007 | Minolta EP1030/1030F CS/PRO Copier

Not finding what you are looking for?
Printers & Copiers Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

john archer

Level 2 Expert

186 Answers

Are you a Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...