When i bought this there wasnt an installation guide and when i put in a dvd it displays that this function doesnt work will vehicle is in motion whether i am in park or not so how do i get this function to work so i can watch my dvds
You should have a wire on the harness labeled Parking Brake (or similar). This wire needs to be connected at the parking brake....or to a toggle switch. It needs to sense a ground after the radio is powered on in order to play DVDs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the clock settinga nd the panel display seems right then we will check on the dvd side. However of the all the lights/display are coming on , not showing any response to the panel then you have a failure of the microprocessor. If not check to clean your head after opening of the set, then insert and watch if the dvd is taken in , played, disc on rotation and read. If not check for transport system, motr failue, link failure, mechanism jammed then if no rotation check for failure of the optical head . replace if you have cleaned the head and checked for any foreign particles. check this out. Good day
This unit was not designed to be used while the car is in motion. Your parking brake must be in the engaged position in order to view the monitor. The brake wire must be hooked up to the parking brake wire or grounded in order for this function to work properly.