Question about Seagate 80GB 7200 rpm SATA/150 8MB Serial ATA HD REFURBISHED p/n ST380817AS (ST380817ASR) Hard Drive

Open Question

Sata hardisk install windows 98

Can i install windows 98 O.S through sata hardisk? cause i have having problem installing win98 in sata hardisk, my HD is seagate 80gig.. big tnxs!

Posted by on

  • gregkihnband Nov 30, 2008

    That's impossible as far as I know. With Windows 2000 and XP you can press F6 and install the SATA controller drivers and then continue to install the OS.

    With Windows 98 there is no support for installing on a SATA hard drive. The Windows 98 boot disk has generic drivers for SCSI controllers and CD/DVD-ROM drives, but it does not have any drivers for SATA.

    Thus, you are out of luck. I really wanted to install Windows 98SE on my SATA hard drive too, but I've been told it isn't possible.

    Perhaps there is a way to slipstream SATA drivers into a Windows 98SE CD?

    Good luck.

    Paul

  • yashwanthp Feb 24, 2009

    how i an boot sata dvd drie through windows98

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: Linux Not installing and Not detecting Harddisk

what version of linux are you using, suse, mandriva, fedora etc...
and which release is it (eg. suse 10.1... or whatever)

Posted on Jan 02, 2008

  • 1 Answer

SOURCE: Windows 2000 advanced Server does not support Seagate 250 GB Hard Drive.

I am inclined to think that this would be a problem with the jumper settings limiting the size of the drive.
I can't offer anything more than that, sorry. Hope it will help a bit.

Posted on Sep 15, 2008

mdsaeed67
  • 849 Answers

SOURCE: Sata drive not detected

just no other solution except upgrading BIOS properly

Posted on Oct 27, 2008

SOURCE: Seagate SATA 80GB Master Drive and Seagate IDE 80GB Salve Drive

Dear,

You have to make IDE drive as slave. For this put the jumper to slave in IDE drive. Possibility of CMOS battery is rare, but you can confirm it by checking your system time in BIOS. If system time is ok then there is no problem in CMOS battery and you need not to replace it.

Thanks,
Rakesh Kumar

Posted on Jul 23, 2009

hawkform
  • 217 Answers

SOURCE: TAKEN OUT A TOSHIBA 80GIG DEAD DRIVE, lAPTOP

Hi and welcome to Fixyah,

That is IDE,

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installed win98se in maxtor 8gig hd on 2nd ribbon cable,deviceman sees 3 standard IDE controllers(no warning flags),3 primary and 3 secondary with the old yellow exclim.(!) warnings.I believe I need some...


windows 98 in year 2017, why/?
good luck,
why mess with this old box.
why not get a 10 year newer box for near nothing at GOODWILL.
really this box is land fill fodder. now. know body beats there head on w98 now....
mx.com no support
hp.com no support its on the no support page, seen here
Compaq Presario Media Center SR2030NX Desktop PC
so if a driver is bad (hell the hardware is too)
then go to the chips that fails home page

the mobo is ASUS>
A8M2N-LA
may be the they have 19 year old IDE drivers for win98
 GeForce 6150 LE chipset
the IDE is nforce , (old)
the only hope is Asus, old pages or nvida relic pages.

http://www.nvidia.com/object/nforce_nf4_winxp32_8.26_11.09.html

Mar 26, 2017 | HP Compaq Presario SR2030NX PC Desktop

2 Answers

How do i erase windows 95 and replace it with windows 98?


you get a copy of windows 98, pop in the disc, click upgrade (or fresh install if you don't wanna keep anything), and let her install. About 45 minutes after it reboots you should check on it because it has a dialog box for you then.

Sep 27, 2009 | R.A.M. Computers Featron FT6750, Pentium...

1 Answer

I cannot install software


Hi..
This happen due to 3 reasons,
The Hard drive is bad.
The BIOS Setting have to be put to SATA.
During the the installation the have to press the F6 option to install the SATA drive drivers.

Let me know
Thanks
Smith

Aug 09, 2009 | ASUS P5LD2-VM Motherboard

1 Answer

Computer boots up then shows windows 98 scrren


you may face either harddisk failure, a driver problem or virus infection:

tools: original win98-cd (or a bootable image

version of it), antivir-software on cd!

- please check whether it is possible to boot from win98-cd, with cd-rom support, not from harddisk.

(such option should be availabe after bios-load is over)

if not:

leave the setup process without fully installing
(press F3 button when asked for repair or install option)

in both cases :

type at the dos-prompt:

c:\win98/win

(command for changing to harddisk, windows-folder, booting windows from harddisk, but without loading all the drivers as usually)

win98 should come up in protected mode or give error messages.

- access cd-drive and execute vir-scan.
- delete and/or repair infected files
- turn down, attempt to reboot from hd
- if still impossible reboot from win98-cd,
run repair of installation and try once again
standard boot

problem solved? if not, take down error messages consult fixya again!





Jun 13, 2009 | Dell XPS M140 Notebook

1 Answer

Installation problem of win98 in a sata hdd


try using third party raid driver and set bios to legacy device

May 08, 2009 | Microsoft Windows 98 for PC

3 Answers

Instalation of windws 98


Change your bios setting to boot from cd. restart, choose start with cdrom support and follow the instruction

Mar 14, 2009 | Microsoft Windows 98 for PC

1 Answer

I have a new 8ogb sataII Exelstor hardisk which i


Windows XP does -not- have native SATA support and therefore will not recognize a SATA drive without first installing 3rd party drivers.
To go around this problem without installing drivers check your BIOS. There might be something in there where the bios will emulate an IDE controller.

If not, you'll need a floppy and the sata drivers. A flash drive will also do if the motherboard bios supports legacy USB. To find the drivers, simply go to the motherboards manufacturers website.

Mar 03, 2009 | EPoX EP-8KRAI-X Motherboard

1 Answer

To instal missing file NTDLLDLL.NtShutdownSystem


If you have the Windows 98 installation CD, simply put it in the CD drive and select 'repair', or just run it over the current installation. No files will be deleted, but you wll have a fresh install of Windows 98.

Unfortunately, if you do not have the Win98 CD, then this is pretty complicated and best attempted by a computer professional.

Nov 08, 2008 | Microsoft Windows 98 for PC

Not finding what you are looking for?
Seagate 80GB 7200 rpm SATA/150 8MB Serial ATA HD REFURBISHED p/n ST380817AS (ST380817ASR) Hard Drive Logo

Related Topics:

2,637 people viewed this question

Ask a Question

Usually answered in minutes!

Top Seagate Computers & Internet Experts

Computer Links

Level 3 Expert

2385 Answers

Steve

Level 3 Expert

3287 Answers

terminalcon

Level 2 Expert

81 Answers

Are you a Seagate Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...