Question about JVC Car Audio & Video

Open Question

How do you set the time on the JVC kd-s12 car stereo player

Everything functions on my deck. I just don't know how to set the clock. Is there anyone that can help me?

Posted by on

5 Suggested Answers

  • 3 Answers

SOURCE: Sansa fuze mp3 player wont play on my jvc kd-dv 7402 car stereo

you can only plug this type of mp3 player through the headphone jack to your aux in jack on the front. the usb port is for memory sticks and cards your unit will automatically play the tracks off of one of these

Posted on Jan 30, 2009

  • 1 Answer

SOURCE: car stereo displays 000ZAA

remove front panel and press reset button with ballpen

Posted on Mar 02, 2009

  • 33 Answers

SOURCE: no manual for KD-S12 car radio, need to set the

JVC has their manuals on their website. I have posted a link below for your stereo.

Posted on Mar 04, 2009

  • 74 Answers

SOURCE: Trying to set clock time

you will find the instructions on the link above

Posted on May 12, 2009

  • 2992 Answers

SOURCE: How do you set the clock on JVC KD-AR470

Here's a link to JVC's download page for this model. Both the installation and owner's manuals are available. You should find what you need there.

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Clarion vx400 clock wont maintain time

There are three main wires that control the power of any deck. They are as follows:
  • Bat+(12v) -RED- This is the main power wire. There is no mistaking this wire
  • Ground -Black- ground wire that is usually connected to the frame.
  • Constant -Yellow - This is the wire that provides a constant low voltage to the deck when the ignition is turned off. This is the wire that maintains certain functions such as last position on CD and also for the clock to maintain the correct time.
The constant wire is the one you are looking for. The best way to find the constant wire is to take a test light and probe till you find it, when you are doing this make sure that the ignition is off. In this state only the constant wire will set off the test light. Good Luck and let me know if you need any more help

Jan 28, 2012 | Clarion Car Audio & Video

1 Answer

Bought brand new car audio head unit CQ-RX420W. 2 questions if anyone can help please. 1. The aerial wont retract when a non radio source is selected. 2. There's no orange wire in the loom for dimming the...

The antenna generally will not retract until the power is turned off at the deck or if you turn the key off (which turns the deck off).Your deck may have a selectable dimmer function in the settings menu you should be able to set it to automatic and it will handle the dimming on its own then.

Jan 30, 2010 | Panasonic Car Audio & Video

1 Answer

I have a pioneer car sterio and needto know how to set the clock deh-p4700mp

press function to select clock. Press function repeatedly until clock appears in display. Press <or> will select one segment of the clock display hour---minute pressing up key will increase the hour or minute> Pressing down key will decrease the hour or minute.

Hope this helps.

Jan 06, 2010 | Pioneer Car Audio & Video

1 Answer

I can not remember how to reset the clock on my Kenwood KDC-MP332 MDS Fet 50x4

To set your clock on your Kenwood deck you must 1st have the deck in "stand-by" which you get to pressing the source button till just the clock displays, no music. Press and HOLD the "f" or function until you see menu, from there toggle thru the choices until you see clock adj. and use the ff/rw to set the hours and minutes and when finished hit the "f" button and your done. Now if you don't have a "f" button press the display button. Again Kenwoods hide the set-up menus really well. good luck. mark

Aug 20, 2009 | Car Audio & Video

1 Answer

How do you set the clock on an alpine tda-7552

Wow that is an old Alpine cassette deck? Ok if memory serves me correctly do you have a little button labeled "clock"? If so hold it down for a few seconds till it starts blinking, than using preset 5 for hours and 6 is for minutes when you set the correct time press the clock button again to save the time you set.

Jul 25, 2009 | Alpine Car Audio & Video

1 Answer

I can not figure out how to set clock on a pioneer super tuner 3

On a pioneer, turn the deck off(hold down source), then hold down the function key the clock will come up and you can use the arrows to change the values.

Jun 03, 2009 | Car Audio & Video

1 Answer

Setting clock

turn off power and hold set button use the volume button to turn the hour and min

Jun 02, 2009 | Car Audio & Video

1 Answer

Cant change clock setting of pioneer deh 4050UB

I dont know what deck you have but you can try this. Turn off the deck by holding the source butten then hold the function butten you will be able to turn on and off the warn for the alarm along with the clock.

Mar 24, 2009 | Car Audio & Video

1 Answer

Dont know how to set clock

1 - Press FUNCTION to select clock (Press FUNCTION repeatedly until clock appears in the display)

2 - Press < or > to select the segment of the clock display you wish to set. (Pressing < or > will select one segment of the clock display: Hour -- Minute)

3 - Press /\ or \/ to set the clock. (Pressing /\ will increase the selected hour or minute. Pressing \/ will decrease the selected hour or minute.

Hope that helps!

Mar 01, 2009 | Pioneer Car Audio & Video

1 Answer


You can find a manual for your deck at:

Page 34 walks you thru how to set your clock. You can save this manual for future reference. Thanks

Nov 25, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers


Level 3 Expert

98792 Answers

xxxxxx xxx

Level 3 Expert

4724 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides