Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore Elite Washing Machine LD Fault

Kenmore Elite Oasis HE Washing Machine Model 110.27062600. Gets an LD fault light and stops just before the rinse cycle starts. Called in a repair man, and replaced the main pump. Still getting the LD fault light. I disconnected the suction line on both the main pump and the recycle pump to assure all water was drained. Even with all of the water drained, and the washer is restarted, the main pump runs for about 5 minutes, then the LD fault comes on. Any thoughts on what to do next?

Posted by on

  • srmramsey Oct 23, 2008

    I keep getting a LD fault and the machine just beeps. If I unplug it, and restart the cycle it just sits there. Water is still in the tub and it won't spin at all.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 324 Answers

Mpratt, check to make sure there is no restriction in your pressure switch tube.it could also be kinked.

Posted on Nov 11, 2008

  • Joe Headd
    Joe Headd Apr 19, 2012

    No restrictions in pressure switch tube. any more ideas?

×

1 Suggested Answer

blueextc3221
  • 15935 Answers

SOURCE: kenmore elite oasis washer model 110 27062600 f 50 code shows

F50 = Motor Stalled
Themotor is stalled first thing to check is that there is nothing stoppingthe motor in between the tubs under the unit at the stater motor.
Ifevery thing check ok the rps sensor will most likely be at fault.
Thisis located under the unit to the right of the stator motor.

Themanufacture has come out with a kit for the f-50 f-51 error code. Thekit is a new control board,wire harness,and sensor.

CLICK HERE to see/order it

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.


Posted on Jun 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ld code. It won't drain. Not the drain pump (I changed) and not clogged pipe.


Slow drain code. How high is the outlet pipe ABOVE the machine?

Jan 05, 2016 | Washing Machines

1 Answer

How do I unclog the long drain Kenmore elite oasis?


Honestly, we got rid of the machine and bought a Maytag Neptune. I was over trying to figure out all the codes the Oasis was flashing. We gave up on the first one that started having problems when a friend gave us one identical to ours and it has done a lot of the same things.

Apr 03, 2014 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore Elite Oasis Clothes Washing Machine Model # 110 27032603 Stop Running while Filling w/ water Flashes Error code F 50


This is a no motor movement fault, This could be due to a fault with the RPS (rotor position sensor) or the machine electronics but either way would require an experienced person to repair.

Mar 05, 2012 | Washing Machines

1 Answer

I have an kenmore elite oasis he and the washer has a code - LD. If i try to stop and start it, it just hums.


Hello,

The LD means Long drain time...that error code coupled with the hum i believe something is stuck in the drain pump preventing it from turning and that is why its humming

GENE

Aug 28, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My Kenmore Elite Oasis HE model number: 110.27072603 washing machine shows LID error code. It wont work at all.... went half way through cycle... help.


Greetings,
this washer has a lid switch problem...or possible main board failure, but lid does concentrate on the lid safety switch. If you remember when you open the lid it stops..well, its a safety feature and prevents tub from spinning with lid open...this one is more difficult to service if your not use to working on washers...try unplugging machine and leaving off for awhile...does the door lock? check switch for lid fault

Nov 25, 2010 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Machine stops during cycle


"LD" stands for long drain meaning that the pump could be bad or that it just needs to be cleaned out.

Jul 22, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Washing machine stops half way thru and flashes code LD?


Long Drain
Ld flashes when the water level does not change after the drain
pump is on.
Is the drain hose clogged?
Is the drain hose height greater than 96′?
Is the pump running? If not, see TEST #7, page 13.

May 06, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore elite washer problem


you can use a shop wet vac on the drain hose to **** the rest of the water out then you can remove the hoses to check to see if anything is suct in hoses or pump-,mike

Apr 24, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

Related Topics:

705 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...