- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Thanks for using FixYa. The first thing that should be checked is the Thermal fuse which is mounted to the exhaust duct inside the back cover. If this fuse goes bad the dryer will not heat and you’ll have to replace it as it cannot be repaired. If this is fine then you’ll need to check the thermostat, igniter and coils. Please do rate the solution if the issue is resolved or post a comment for further assistance.
for using FixYa. No Heat
issue in an electric dryer is usually caused due to three things mainly:
Thermal Fuse, Wiring Harness and/or Heating Element. Start with checking the
Thermal Fuse which is mounted inside the back cover panel to the exhaust duct
and is mounted in white plastic housing. If that’s fine then the Heating
Element should be checked. Please do rate the solution if the
issue is resolved or post a comment for further assistance. Thanks Rylee
This usually points to a wire that has rattled out of its socket on a kenmore washer. with all the vibrations in a washer, cables do shake out of place, you should take the top panel off by unscrewing it and sliding it back so you can get to the front and back wires and check every connection is clean and secure.
should fix your problem and save about $65USD
first its always important that you give make and model as different makes have different repair proceders for repair the easyiest thing to do first trust me is to turn the breaker off then on then try drier and let me know what you found now dont rate me till we are done ok
cutiepie, I've seen this many times on these dryers. You need to replace the door hinge. Not really a hard job to do. Post a model number (inside door) and we'll get you a part number...Catriver..post back.