Question about Emerson Smartset Clock Radio

1 Answer

Why won't it automatically set time?

Won't set time

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 814 Answers

Sorry it took so long to give you a answer for the problem.I hope this information help you with your problem.Thank you for using FixYa and have a nice day! Setting The Time, The First Time IMPORTANT: The first time you connect your new SmartSet® clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you live in the Eastern Time zone, there?s nothing else to do. Your clock is set correctly and running. If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one time and the SmartSet® will remember the new default zone setting and will always return to that setting after a power interruption. There are 7 time zones programmed into your SmartSet® clock radio as follows: ZONE 1 ? Atlantic Time ZONE 2 ? Eastern Time (Default Setting) ZONE 3 ? Central Time ZONE 4 ? Mountain Time ZONE 5 ? Pacific Time ZONE 6 ? Yukon Time ZONE 7 ? Hawaiian Time To change the default time zone display, depress the Time Zone button. The number ?02? will appear on the display indicating that the default zone is ZONE 2, Eastern Time

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jabra freeway won't go back to factory settings


Press Mute, Answer and Voice at same time and hold until the unit makes a three toned sound. Power Off Unit then power back on. Unit will automatically enter pairing mode

Apr 06, 2013 | Jabra FREEWAY Bluetooth Car Kit

1 Answer

Automatic that won't go into gear.


The automatic transmission on the latest automobiles consist of a variety of components. These include: Planetary gear sets etc
----------------------------------------------------------------------------------
car key programmers

Nov 14, 2012 | 1997 Isuzu Rodeo

1 Answer

My clock is constantly blinking and won't go on the right time. I unplugged it and plugged it again, it just keeps blinking.


Hello
Check the bckup batteries in the clock first. If they are weak, backup function will not work properly, and the display will blink after a mains power failure.

Auto Clock Set

You do not have to set the clock time as a

built-in automatic time set system is

equipped in this clock powered by 3V (2

X AA batteries, included). All you have to

do is to plug this clock for power and

current time will be shown automatically.

However, the batteries can also be

exhausted and we recommend that you
replace the batteries every 2-3 years

Before You Plug for Power

1. Setting Time Zone

You may slide the TIME ZONE selector at

the back of the unit to Eastern (EST),

Central (CST), Mountain (MST) or Pacific

(PST) (refer to the maps on the right).

2. Daylight Saving

You can slide the DST switch at the back

of the unit to turn on/ off in areas

observing/ not observing such time

change.

WARNING: Please avoid playing with

these buttons after entering the
Clock/Alarm set mode.

Setting Clock

1. Slide the switch /WAKE1/WAKE2/

on the top of the unit to clock position.

2. Press REV or FWD to set the clock

time. The time decrements or increments

will follow by a faster rate when you press

and hold the buttons. The ":" between

hour and minute time flashes when you

are setting the time. AM or PM icon will

also beside the time.

3. Slide the switch /WAKE1/WAKE2/

on the top of the unit to position
when finished.
OK.

Aug 12, 2011 | RCA RP5430 Clock Radio

1 Answer

My turn signal won't lit when activate and my brake light also wont also but is illuminate. The Top Brake light do light up when but only when the lights are turned on manual setting if they are on...


possible multifunction switch gone bad for turn signal problem. do headlihgts come on in a dark setting on automatic or not? if they don't come on when it is dark then most likely bad light sensor in top of dash or maybe unplugged if recent dash work has been done.

Jul 13, 2011 | 2002 Mercury Mountaineer

1 Answer

I have two of these dehumidifiers. They won't go on automatically. I don't understand the settings. One of them won't stay on at all. It runs and then shuts off.


As per your problem, that the dehumidifier shuts offautomatically - If yourdehumidifier froze, the compressor will shut off automatically. Allow the iceto melt before emptying the tank and restart the dehumidifier. Hope this will help you. Good Luck.

Jul 08, 2011 | Haier 65-Pint Dehumidifier

1 Answer

My hp 540 in battery mode while powered on switches off automatically within 4 second even before display appears, booting takes place whereas in adaptor it is reatsrting automatically


Ifthe laptop battery is more than 3 - 4 years old then the battery could be wornout. Rechargeable batteries have a finite number of charge and discharge cyclesand will lose their charge capacity over time, i.e. won't charge to 100% andgradually the charge reduces until the battery won't charge up atall. ORThe battery shows a 100% charge but when the adapter is disconnected thebattery drops off to zero capacity in a very short time. Ifthe battery drops to an unacceptable charge level then the battery needs to bereplaced.

Apr 21, 2011 | Computers & Internet

1 Answer

I CAN'T GET THE "SET STEM" TO GO ALL THE WAY BACK


I have owned two Tag dive watches. They both have issues with the stem. You have to press it in very hard, then turn it counter clock wise tll it pops out, then you can set the time, which needs to be done (at least on these two) on months with different # days. If the stem won't move, place a few drops of "3 in1" oil, or even olive oil on it, give it a few minutes, dry off the outside, then try again - it always works for me. When pushing it back in, turn it clockwise. The next time you set the time, it'll be ++ easier.
i

Nov 15, 2010 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

Automatic won`t change above second gear


tranny shop time tranny pump problem

Feb 19, 2009 | 1998 Nissan Altima

1 Answer

S/box won,t work


a friend fixed it for me. he installed a new firmware and factory setting that,s all i can remember hope this helps

Dec 25, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Roper Gas Dryer


hi first thing to do is clean all the venting and try again. thanks the appliance doc

Apr 19, 2008 | Roper RGX4634KQ Gas Dryer

Not finding what you are looking for?
Emerson Smartset Clock Radio Logo

Related Topics:

1,664 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Audio Players & Recorders Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Cindy Wells

Level 3 Expert

5186 Answers

Are you an Emerson Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...