Question about Fujitsu 24C1 Air Conditioner

2 Answers

Replace the batteries on the remote,

We have a fujitsu AST20RGA-W air conditioner, I need to replace the batteries on the remote, but cannot work out how to open the damn thing. the back will only open the bottom half with the top half still tightly on

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Simply continue sliding front panel down until it stops. At this point, move same panel left to right and apply further pull down pressure. Panel will now be removed from controller and reveal batteries.
Hope this helps, Ash.

Posted on Oct 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Keep sliding the Panel down, when it stops you can carefully pry the top of the panel with a wide knife or screwdriver. However, once I replaced the batteries, the remote quit working.

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote control is working i need replacement is for fujitsu air condition model #AR-RY6 or can i use different model


I find that most remotes from the same manufacture work on different models. Fujitsu is big enough where I think its worth a try.

Oct 15, 2016 | Fujitsu Air Conditioners

1 Answer

My Air Conditioner has stopped responding to the Remote. I have checked with my mobile phone camera & the 1 light still works on the remote. The Air Con manual button works but remote does not. Is this...


Try with this method which happened last week experience. Replace new batteries. And also remove dc wire to indoor unit display sensor. And after 3 minutes fix it again. And now start with remote. Mostly it will. If not, you have to replace receiving sensor in PCB or replace complete PCB. Please write back about the result. Thanks.

Jan 27, 2011 | Fujitsu Air Conditioners

1 Answer

Dear expert, Our dog chewed up our "remote control unit model: AR-DB4". We live in Curacao, so my question is, where can we order another remote control for our Fujitsu air conditioning? ... It's...


Get your Dog to the nearest VET immediately. The next thing is to ask your Fijitsu dealer for a spare remote control.
If not then you must check out if the multipurpose remtoe will work out with this model.
Get help from an accessories shop to give a remote to test/replace before buying.

Sep 11, 2010 | Fujitsu 22U Air Conditioner

1 Answer

Turned off a/c remote < now it won t turn back


It sounds like the remote sensor pc board is bad, you need to replace the sensor board.

Nov 03, 2009 | Fujitsu 24C1 Air Conditioner

1 Answer

I replaced batterys in fujitsu splite system and now it dose not work . has anyone hear of this problem. is there a reset i need to do?


it supposed to have a reset at the back of the remote and make sure you have the batteries in the remote the right way or it could be your curcuit board you may have to call in a technition

Oct 27, 2009 | Air Conditioners

1 Answer

Replace remote


you have to get the parts from a dealer the best thing is to go on the fujitsu website and ask who the local rep is for your area and they can point you in the direction you need to go in

Sep 16, 2009 | Air Conditioners

1 Answer

Fujitsu air conditioning remote control not working (model AR-NJ1) . Tried different batteries with no result. Thanks!


open the remote and carefully look at where the batteries make contact they sometimes bend in and dont make contact just pry them out a little and reinsert batteries and it often will work again

Jul 07, 2009 | Air Conditioners

1 Answer

We have a fujitsu reverse cycle air conditioner. Last night when we went to turn it off with the remote it did not respond. We needed to turn it off at the switch outside the house. We replaced the...


Check if the remote control if still good, using the camera of your cellphone point remote control to the cellphone camera and press the "on" button of your remote and you can see the light emitting from your remote control transmitter. If the lights emits that means your remote control is good, if not means the remote control is defective.If the remote control still good try to press the RST or RESET button on your remote control and try. If wont works it means that the reciever board in the indoor unit is defective.



bcdc925.jpg620d5f6.jpg

Aug 20, 2008 | Fujitsu Air Conditioners

1 Answer

Fujitsu remote control unit /MODEL AR-RY16


my remote went blank suddenly. I replaced the batteries and nothing happened. what can I try?

Jun 07, 2008 | Fujitsu 24C1 Air Conditioner

Not finding what you are looking for?
Fujitsu 24C1 Air Conditioner Logo

639 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Air Conditioners Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

BOB  BROWER
BOB BROWER

Level 3 Expert

267 Answers

Bill Long

Level 3 Expert

577 Answers

Are you a Fujitsu Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...