Question about Fuji FinePix 2650 Digital Camera

2 Answers

Dim lcd lcd screen very dim changed battries did not help adjusted brightness also did not help still takes good photos

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 215 Answers
Re: dim lcd

Oh No, another shop job. It sounds like the inverter or tube for the LCD are on their way out. I'd recommend a watch on Ebay for the same model but with maybe a bad lens and swap the LCD and the board it connects to. A very simple job if you take you time and remember where the screws go back and which length screws go where. Because the camera is 4 years old and still has some life in it you may be better off using it as it is and utilize the optical viewfinder instead. Just remember, you only see about 80% of the actual photo in the optical VF so allow for that when taking shots. You can always use Photoshop etc to crop out what you didn't want. Just use the LCD for changing menu setups. BMW

Posted on Jul 28, 2006

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 57 Answers
Re: dim lcd

Hello, your problem is related to electronics, and it will not be fixed without opening the camera. thereafter i suggest to reset the camera, if problem still remain, go to fuji shop...... good luck...

Posted on Jul 28, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The LCD screen is too bright, cannot get a clear image. dont know why. it does take normal pictures, but cannot see what i am taking a picture of, or read the menu properly. please help. henry

the lcd screen turns dim or indistinct,it means it is in a bad condition. the lcd screen needs to be protected properly especially for a long time can buy a new lcd or find a replacement.

Aug 27, 2011 | Canon PowerShot A490 Digital Camera

1 Answer

When i try to take photo the the LCD screen is blank. Theis happen after i changed the battries. I can review previous photos on the screen however when i go the take Photo mode the screen is dark.

It is ccd imager chip failure problem that need to be replaced.
Canon offers free of cost ccd imager chip replacement for same problem in many models, click Canon Support for details to get free of cost repair offer.

Jun 04, 2011 | Canon PowerShot A610 Digital Camera

1 Answer

My screen went black and I can't take photos. all other funtions work.

try to take a picture even when you do not see anything on its screen. If the picture taken shows up afterwards, you will just need to adjust the brightness for the LCD.

Oct 23, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

2 Answers

Dim screen on DMC FX8 - won't resolve with resets etc.

We had same problem with this camera at work - like another poster has commented, we unscrewed the back casing, lifted it and put it together again - lit up again good as new! must be a faulty connection somewhere. Hopefully it's a permanent fix.

Oct 17, 2009 | Panasonic Lumix DMC-FX8 Digital Camera

1 Answer

Outdoor photos are all over exposed and white. Video works fine.

set ur screen first .click one image 1st load on ur pc. see the screen and pc screen then set ur screen brightness and contrast of ur camera

Jun 17, 2009 | Mitsuba DV505 Digital Camera

1 Answer

Megxon e303

Hi,Try adjusting the LCD brightness. I guess you can do it by pressing the UP button (may be different in your camera).

Hope this works, :)

Sep 21, 2008 | Sony Cyber-shot DSC-W80 Digital Camera

1 Answer


maybe you have changed the mode to "Remote control" - it's the button on top with multiple pages on it (in front of the AF button)
If a remote is shown on the LCD press the button until [S] is shown

Jan 08, 2008 | Nikon D80 Digital Camera with 18-200mm...

2 Answers

The LCD screen is hard to see. What should I do?

If the LCD screen is too bright or too dark, adjust the LCD Brightness setting in the Setup Menu. If you are shooting photos outdoors in bright light, move the joystick to the icon showing the sun over shaowed area to turn on Outdoor mode and make the LCD screen easier to see in bright light.

Sep 12, 2005 | Epson PhotoPC L410 Digital Camera

Not finding what you are looking for?
Fuji FinePix 2650 Digital Camera Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Digital Cameras Experts


Level 3 Expert

93922 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steven Wander
Steven Wander

Level 3 Expert

574 Answers

Are you a Fuji Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides