Question about Gateway Computers & Internet

1 Answer

I turn on my computer,no signal,telling me, something with the v g a,I get a new v g a,still,having the same problem...

Posted by on

  • A Womans Computer Man
    A Womans Computer Man May 11, 2010

    that is the video card crying for attention..check the connection behind the desktop to ensure that the cable from the monitor is good to the box..

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 352 Answers

Hi kymani,

Try this:> Click Start>right click my computer>properties>hardware tabb> device manager> scroll to Monitors> choose uninstall>ok. Reboot pc and windows will detect and install the software for your monitor, check to see all systems go. If this does not resolve the issue, repeat steps substituting "display adapters" for "monitor". You may need the install cd or downloaded(updated software) to proceed with the adapters, but, if I remember correctly, you won't need it, anyway, don't worry about losing things, everything is replaceable or re-installable. If you need assistance with down loading new software, please look for me in "find experts - anaanymous - ."


anaanymous


Rate Me Please! Hate it? Rate it…Like it, try it!
Thank you for submitting your question to FixYa.com
Would you please take a moment and show your appreciation by rating my performance.
All ratings and comments are welcome. Thank you - anaanymous


Posted on Oct 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No start no fuel or spark


What about your ignition module? I can't tell if you just replaced coils or ignition module included? Also, before buying anything, check voltage and ground for ignition module. Pink wire is voltage, black wire is ground.

The crank sensor sends ac signal to ignition module, the module converts signal to dc, something the computer can handle, then sends rpm signal to computer.

Dec 16, 2015 | 1999 Chevrolet Cavalier

1 Answer

Why doesnt my turning signal work when the headlights are on?


could have something to do with the 'flasher unit' cylinderical unit which tells the globes to flash or the headlight/wiper/turn signal swith needs replacing or turn signal fuse has blown.

Aug 30, 2014 | 1995 Lexus ES 300

1 Answer

1991 mitsubishi mighty max 2.4 has no injector pulse why?


It could be that your crank sensor is bad or your ecm. your crank sensor sends a small amount of voltage to your computer telling it that you are trying to start your engine the computer in turn sends a signal to the injectors telling them to pulsate because you are trying to start the engine but if your crank sensor is bad and sends no voltage signal to your computer your computer doesn't know you are trying to start your engine therefore it doesn't send the signal to your injectors telling them to pulsate. If your crank sensor is sending a signal to your computer then your computer is not sending the signal to your injectors more likely a grounding issue through the computer I have seen this before let me know how it goes.

Aug 26, 2014 | Cars & Trucks

1 Answer

1984 Nissan Maxima. A guy was getting my broken key out of my ignition and I think he must of unplugged something to make my turn signals quit. I'm not sure i just know after he did that they quit...


Something could have happened to the key switch, or the turn signal switch.
I would want to know if you have power from the fuse into the turn signal switch to proceed.

Sep 04, 2013 | Cars & Trucks

1 Answer

I'm truing to install a new hard drive with my OS 10.3


Well, first of all, you should reset the CMOS by unplugging the power cord from the computer, then take the battery out, which should be easy to spot. Put it back in after about 10 seconds and plug the power cord in as well.

Now, turn on the computer, and see if you might see any thing, other than a black screen or no signal message.

If you don't see anything, it's possible that the motherboard has been damaged.

If you see something, then goes back the no signal, then your motherboard might be working.

Mar 07, 2010 | Apple Computers & Internet

1 Answer

Trying to get wireless signal to new Toshiba laptop. Signal for handheld IPAQ is fine.


Hi

I want to tell you that as you are receiving good signals on your IPAQ and it is working fine. I believe as ou have new laptop computer make sure your wireless switch on your laptop should be turn on or in order to make sure about your wireless switch you can also try to connect wirelessly in Cafe or your friends home because your computer atleast see your router.

I believe this will resolve your issue.

Oct 31, 2009 | NetGear WGR614 Wireless Router

1 Answer

Mistub XD450. Bulb relatively new. Projector


Does the projector work normally when sitting right-side up? If yes, something could be interfering when the unit is inverted. The symptom you describe initially sounds like a defective fan (some fans put out a computer pulse telling the main board it's running--they have 3 wires, red, black, yellow(signal)). If the board doesn't get signals from all required components, it's programmed to shut down to protect itself.

Aug 29, 2009 | Mitsubishi XD480U Multimedia Projector

1 Answer

Pure highway signal


could you tell us something about "the set"? more details please.

Jun 08, 2009 | Radio Shack TRC-521 CB Radio

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...