System fault 10:368! How I can make it working again?
Help please.After some time (after 30-40 copies)
DC12 stops and message System Fault 10:368 appears. As I undertstood problem is in ROll thermistor. Where it is located and what I can do with it now to make it working?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
timing patch on ibt dirty....usually! If you take out the copy/print cartridge you will see a black belt at about the 7 o'clock position, its on that. easily fixed your competent with a screwdriver. Let me know if you need more info
That's a process problem with that machine.
May require a service call .ON and OFF is pretty much all a customer can do and wait for it to setup. NOTE: The problem occurs because of the trickle development system in the machine, making extended lengths of black and white copies / prints does not allow the black developer housing to purge itself of excess waste Toner (Dry Ink) and Developer. There are two solutions for the problem:
Make 1,000 copies / prints of a black and white job, then make 150 copies / prints of full color. Continue making 1,000 copies / prints of the black and white job, then 150 full color, and so on, until the entire black and white job is complete.
Make extended jobs in groups of 100 by making 100 copies / prints of the black and white job, then allowing the machine to cycle down (return to 'Ready') and making the next 100 copies / prints. Continue in this pattern until the entire black and white job is complete.