Question about Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner

1 Answer

Scanning function of Epson Stylus CX3650

I haven't used my printer in a long time and just can't figure out how to use the scanner! The display doesn't seem to have a button for it, and my printer only shows the CX3600 when it's connected. I can't find the manual for it online either. Please help me - I need to hand in a paper tonight! thanx, C

Posted by on

  • 3 more comments 
  • Anonymous Nov 29, 2008

    I downloaded the drivers but it only gives me the option to scan with CX3600 and so doesn't work for my CX3650 =/ Any help?

  • Elliebelly Feb 03, 2009

    haven't used the printer for a long time. can now print and copy after wiring it up again, but have no cd. i have tried the solution given here... but it tries to install the cx3600 printer and then when i try to open epson scan it says it can not be opened. What does this mean?

  • Anonymous Feb 05, 2009

    can't find any software for the epson stylus cx3650. tried that one already can't get it to work. it's just a big pile of **** !

  • Anonymous Mar 17, 2009

    cannot open scan

  • stacey_19 Mar 21, 2009

    i got given my printer from my dad who was given it from work. I know how to photocopy and print, i need to scan and haven't got a clue how to do it. please help.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 94 Answers

To scan using a multi-function printer, you need to install the software on your computer. Do you still have the installation disk for your Epson stylus CX3650? You may download it from here:

Hope it helps!

Posted on Oct 21, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Reset factory settings

Turn printer 'OFF'.
Hold Cancel button and start/Copy button at the same time.
Turn printer 'ON'.
Release the buttons after display shows "Permanent Storage Init".
Wait till the display shows "Ready"

Jan 10, 2014 | HP LaserJet Pro M1212nf MFP -...

1 Answer

X658 bootup

Try reseat the scanner interface cable, including the the flat cables that connects the scanner card and the system board.
If this doesn't fix the issue, often times a replacement of theHVPS ( High Voltage Power Supply) and the scanner control card is recommended.
For further assistance I suggest you contact Lexmark Technical Support.

Feb 17, 2012 | Lexmark X658DE All-In-One Laser Printer

1 Answer

Camcorder wont turn on at all

Are the batteries fully charged ?

Jun 17, 2017 | Mitsuba DV777 Camcorder

1 Answer

Engine light on in 1999 ford windstar. they can't figure out what it is just said some lean code

It needs to be put on a scanner to see if the O2 sensor is getting the right cross counts. Sometimes they get lazy from a lot of miles and since they haven't completely failed, a regular code reader doesn't pick it up.

Oct 27, 2011 | 1999 Ford Windstar

1 Answer

I am using my mother's Elgin 3400E travel alarm

On my Elgin alarm clock, you just push the nap button and it will add 15 minute increments for a nap. I haven't figured out how to turn it off if I change my mind or wake up earlier than I set it.

Jul 21, 2011 | Elgin Travel Alarm Clock

2 Answers

How do you stop a test page from printing every time the printer is turned on?

Welcome to FixYa!

Here's how to stop the unwanted print out of test pages.

1. Let the printer print the test page.
2. Place the printed test page in the scanner face down and wait for 10 seconds.
3. Press the scan button of the printer to scan the printed test page.
Make sure that the printer scanned the document properly.

That's it. Every time you install a new cartridge, the printer aligns the print cartridge as well as testing/aligning the scanner.

Note: Try to look at the top of the test page, it should have instructions to place it in the scanner.

I hope that this will help.
Thank you for using FixYa.

Mar 07, 2011 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Verizon -LG VX5500- screen display problem

If the phone will do other things like ring when called, or seem to respond when you press buttons, then the lcd is either bad or the connector is loose. But if the phone will not ring when called and doesn't seem to respond to pressing buttons, then there is something wrong with the phone itself. Always try taking out the battery if you haven't already.

Sep 13, 2009 | LG CHOCOLATE VX8500 Cellular Phone

1 Answer

How to scan with the SX100

its easy.

When you have the paper loaded all u have to do is press the button that says "**** my balls".

You will find it below the power button.

Good Luck!

Nov 30, 2008 | Epson Stylus Multifunction Inkjet Printer/...

Not finding what you are looking for?
Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner Logo

Related Topics:

2,187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2668 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18410 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides