Question about HP PSC 1600 InkJet Printer

1 Answer

Ink Level I can't find where to check ink level on my printer

Posted by on

  • hcl33morton Nov 28, 2008

    I am unable to check ink levels on my 1600 inkjet printer since i have been using it on Vista. Plwease help me.

  • Anonymous May 13, 2009

    yo modafuka this **** don work niga !

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Perform the following steps to check the estimated ink levels:

  1. Open the Printer Toolbox . There are two ways to do this:
    • Click Start and select HP Solution Center . Select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox .
    • In your printing application, click File , click Print , and click Properties . Click the Services tab, then the Service This Device icon.
  2. The Printer Toolbox opens. Click the Estimated Ink Level tab. A cartridge may be running out of ink even if the graphic shows ink remaining (see the note at the start of this section). Lines or streaks always appear in printouts when the cartridges begin to run out of ink. Replace print cartridges that are out of ink or low on ink.I hope this Solve your issueKhaled

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

U162 error on black ink cannon printer


This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.


If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K

Nov 20, 2012 | Canon PIXMA MX340 Wireless Office...

1 Answer

I want to check ink levels. It is blurring the color when printing


Checking the ink levels A message will appear on the front panel display when the ink level for the print cartridge is low. The ink levels can also be checked through the HP Director on the computer.Checking the ink levels on a Windows computer
  1. From the HP Director , click Settings , Print Settings , and then click Printer Toolbox .
  2. Click the Estimated Ink Levels tab. The estimated ink levels appear for the print cartridges.
Checking the ink levels on a Macintosh computer
  1. From the HP Director , click Settings , then click Maintain Printer .
  2. If the Select Printer dialog box opens, select the HP PSC, and then click Utilities .
  3. From the list, select Ink Level . The estimated ink levels appear for the print cartridges.

Jun 21, 2011 | HP LaserJet CP1518 Printer

1 Answer

How to check ink levels for HP6500A Plus Printer


Hi,

Normally there are 2 different ways to check ink level on any HP printer

First one is :

IF your printer is HP Officejet 6500 Wireless AIO,

Press Setup button ( ranch like symbol ) on printer front panel
Use Arrow key ( left or right arrow ) till you find Tools option - Press OK
User Arrow key to find Ink Level or Ink Gauge - Press OK.
It should display the ink level.

If it does not display ink level through this method, it could be for many reasons like printer is not aligned or one of the cartridge is not recognized etc.

2nd method is from PC
Open HP Solution Center
Click on Settings
Click on Printer tool box
Click on Ink level

Regards,
Ron



* Please rate this solution with Thumbs up and Testimony to help us improve providing support

Apr 20, 2011 | HP Officejet 6500 Wireless All-in-One...

1 Answer

I have a hp psc 1310 series printer and i can not find the site to check the ink levels. The book says to use the hp director on page 28.


Checking the ink levels A message will appear on the front panel display when the ink level for the print cartridge is low. The ink levels can also be checked through the HP Director on the computer. Checking the ink levels on a Windows computer
  1. From the HP Director , click Settings , Print Settings , and then click Printer Toolbox .
  2. Click the Estimated Ink Levels tab. The estimated ink levels appear for the print cartridges.
Checking the ink levels on a Macintosh computer
  1. From the HP Director , click Settings , then click Maintain Printer .
  2. If the Select Printer dialog box opens, select the HP PSC, and then click Utilities .
  3. From the list, select Ink Level . The estimated ink levels appear for the print cartridges.

Oct 05, 2010 | Printers & Copiers

1 Answer

There is no icon on the taskbar, and I cannot figure out how to check the ink level.


The HP Toolbox can be used to check ink Levels

  1. Right-click the taskbar printer icon .
  2. Click Open HP Deskjet 5550 Series Toolbox .
  3. Click the Estimated Ink Level tab.
  4. Check ink levels (estimate only, actual ink levels may vary)

Sep 23, 2010 | HP DeskJet 5550 InkJet Printer

2 Answers

How can i check ink level


If you have Vista OS on your machine, these steps might help:

1. Right-click on the printer
2. Select "Printing Preferences"
3. Go to "Features" tab
4. At the bottom, click on "Printer Services"
5. Select "Check ink level" tab and you will see a graphical representation of the ink level on your printer.

Ta

Sep 17, 2010 | HP Printers & Copiers

1 Answer

With new cartridge indicates low ink level,


The ink level gauge may not work properly with refilled cartridges. Because of this, you might get low ink message after refilling. To install the refilled cartridge you might need to override the ink level gauge. Overriding the ink level gauge disables the printer’s ink level tracking feature, but allows you to use refilled cartridges. To override the ink level gauge, please check your printer reference guide. After disabling the ink level tracking feature you should check the ink level visually and as soon as the ink level gets low you need to refill the cartridge. You do not want to try to print with an empty cartridge. Trying to print with an empty cartridge may damage your print-heads.

otherwise you will have to replace the cartridge .

Oct 21, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

3 Answers

How do I check the ink level in the printer


Most printer will let you check the ink level using the Menu and it is sometimes under a category called Supplies or Ink Levels. If this is a laser printer you are working with Toner and its not exactly the same.

Sep 09, 2009 | Kodak Printers & Copiers

1 Answer

Can't find tool box to check ink level - HP 6310 using Vista 2007


doesnt matter most printers have a feature of their own to check ink levels.
press the setup button on the printer and scroll down(with the arrow buttons) till you get tools press ok and now scroll through until you get ink level and select it by pressing the ok button,walla you should have your ink levels in front of you.

Now about the hp solution centre/hp director icon on your desktop (if you have installed the software).
Click on settings and click on printer toolbox and now check your estimated ink levels it will show the ink levels of the printer cartridges.

May 26, 2009 | HP OfficeJet 6310 All-in-One Printer...

3 Answers

How do you check ink levels


Introduction This describes how to check the estimated ink level in the cartridge. NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When an indicator shows low ink levels, keep a replacement ink cartridge available to avoid possible printing delays. Ink cartridges do not need to be replaced until print quality becomes unacceptable. Checking ink levels Perform the following steps to check the estimated ink levels: NOTE: If you have installed a refilled or remanufactured print cartridge, or a cartridge that has been used in another printer, the ink level indicator will be inaccurate or unavailable.
  1. Open the Printer Toolbox . There are two ways to do this:
    • Click Start and select HP Solution Center . Select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox .
    • In your printing application, click File , click Print , and click Properties . Click the Services tab, then the Service This Device icon.
  2. The Printer Toolbox opens. Click the Estimated Ink Level tab. A cartridge may be running out of ink even if the graphic shows ink remaining (see the note at the start of this section). Lines or streaks always appear in printouts when the cartridges begin to run out of ink. Replace print cartridges that are out of ink or low on ink. Figure 1: Estimated ink levels
  3. 88b5d35.gif

Nov 23, 2008 | Printers & Copiers

Not finding what you are looking for?
HP PSC 1600 InkJet Printer Logo

Related Topics:

797 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...