Catridge refiling i want to know about refilling of catridge for optra lexmarkE312

The Lexmark S405 printer requires all cartridges to have ink in them to continue printing.

The 100/100XL cartridges are not licensed to be refilled. You can, however, refill the 100A or 100XLA cartridges available on the Lexmark website at http://www.lexmark.com. You should be aware that a refilled cartridge will not be able to report its ink level, and you might not get the print quality you expect from ink that is specially formulated by Lexmark to pass through microscopic nozzles at extremely high temperatures.

see, you have inserted the paper well. if not solved, your catridge have low ink or empty. so bring a new catridge or if you can, refill the catridge. 1610 catridge can be easily refilled.

Hi

I would never reccomend refilling a cartridge

I have seen alot of machines ruined by cheap refills.

If you want more technical detail as to why not use refills, contact me at [email protected]
and i will be more than willing to supply you with the nitty gritty

Check that the cart is refillable first. Without knowing which printer it is impossible to advise.

There are catridge refill kits available for Canon catridges. Be sure to make sure that the kit will refill the cartridges for your model. Here is a link to a refill kit available on Amazon.com: http://www.amazon.com/Cartridge-Refill-CLI-8B-CLI-8M-CLI-8Y/dp/B00246MOHK

Dear Sir,

This is deffinately due to catridge circuit problem.Canon suggest that we have to replace emptied catridges with new genuine canon catridge they dont suggest refilling and also not give any support for refilling catridges. So you can replace catridge with new one.
This Happens due to weakining of catridge circuit portion or may long period printer not in use.
If you not want to replace catridges i will give you the possible hints it may fix refilled catridges.
1.Clean the catridge circuit portion with soft cloth,care must be taken that there is no smudge or ink traces on catridge circuit.
2.Clean the ciruit of printer catridge placing box present inside the printer .wipe out the any sumdge or ink traces.
Then re install the catridges. give the print if it shows error press resume button continuosly. I think it will fix your problem.
If it is not solution is replace the catridge with new one.

good luck

Drvirao, if you're talking about just refilling the ink cartridge itself, there are refill kits available for purchase, some for a reasonable price. I've provided a link (just copy the entire link below and paste it into your web browser) I know for sure that HP provides Ink Cartridge Refill kits that you can purchase. I hope that this was able to answer your question.

http://www.google.com/search?hl=en&q=ink+cartridge+refill+kits&btnG=Google+Search

The magic word is "refilled." Not all refilled cartridges work correctly. Try another cartridge (a new one to be absolutely sure) to verify the printer is working properly. But my money would be on "defective refill."

I had refilled the catrige, then when I start to print a 'service error' window will appear. At the LCD screed shows E.. 4 ..2. I believe the printer simply assume the catridge is depleted, but how can it happened as I already just refilled it.
How to make printer detected the catridge as a full? I really hope you can solve and make my refilling mission succesful and my printer work again.

please donot use refilling system it is not for printer
it is new catridge after finishing you can refil for once dont use more times
it depends upon refilling-the quantity-before refilling you should clean with boiling water and then start refilling-if you shake the hands it ink will come out nozziles then use if not see the contacts of the catriges-if not just replace new catridge