Question about RCA OPAL M4001 MP3 Player

2 Answers

Mine does the same thing too

Mine stays on the initializing screen and refuses to identify a usb connection will not stay on

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Go to "http://voxrightnow.custhelp.com/cgi-bin/voxrightnow.cfg/php/enduser/std_adp.php?p_faqid=2559"
To update the firmware of the M42xx mp3 player click here and download the firmware. start the firmware and when it is runnin plug the M42xx in at the same time holding down the PLAY BUTTON (center) until a white screen with a small computer with a line going to your M42xx is displayed and then release the PLAY button. You can then click on start and the firmware update will complete,,, DO NOT DISCONNECT DURING THIS UPDATE... it may take 2 times to complete this but it will work.... YEA!!!! WORKS with 2, 4 or 8 GB Models.....

Posted on Jan 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 159 Answers

Go to the RCA website.
http://www.rcaaudiovideo.com/product.aspx?product=408
download the firmware.
After you download the firmware
plug your mp3 player into usb device of your computer
Then install the firmware.
And you pc will reconize it.

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Advent Sienna 500 won`t switch on and keeps bleeping


First thing is to identify beep codes.


Beep Code Descriptions
1 short DRAM refresh failure

2 short Parity circuit failure
3 short Base 64K RAM failure
4 short System timer failure
5 short Process failure
6 short Keyboard controller Gate A20 error
7 short Virtual mode exception error
8 short Display memory Read/Write test failure
9 short ROM BIOS checksum failure
10 short CMOS shutdown Read/Write error
11 short Cache Memory error
1 long, 3 short Conventional/Extended memory failure
1 long, 8 short Display/Retrace test failed

Aug 25, 2012 | Computers & Internet

2 Answers

My screen stays black I can feel it vibrate when I push the screen. I tried turning it on/off, but this doesn't help.


mine is doing the same thing but when it goes black i have to take out my bvattery

Jan 16, 2012 | Pantech Breakout

2 Answers

Stays on the Initializing screen.


remove all the files and then try

Aug 03, 2009 | RCA M4204 MP3 Player

1 Answer

Every time i turn it on it says usb safe mode


RCA audio/video jukebox is refuse to turn of and on,it always wrte USB safe mode, later it will write don't remove the cable it's transfering data.or unpluge and reset. what will i do to off it.

Jun 20, 2009 | Thomson Lyra PDP2860 Digital Media Player

2 Answers

I have a Myguide 3100. It has worked up until now but it powers up only shows the initial face page. Nothing then happens and the screen goes blank. I have tried it connected to my computer, charged u


i have the same thing happening to me. Every time im turning the sat nav drom ireland to UK it makes same beep noise and stays at ireland can you help me please

May 30, 2009 | MyGuide 3100 GPS Receiver

1 Answer

Palm z22 USB won't stay connected


Hi, I also had the same problem exactly the way you described it. What worked for me is putting in the original installation cd that came with the palm. Run the installation and I think the computer will recognize the palm and stay connected. Hope it works.

May 11, 2009 | Palm Z22 Handheld

1 Answer

Mp3 player freezes at initializing screen


Plug it into the usb device.
Hold down the power button for 10-15 seconds.
Go to the RCA website download the latest firmware and install it.
That fixed mine and a few other people I know that have one.

Jan 09, 2009 | RCA M4204 MP3 Player

1 Answer

Powerless Garmin


i think i have the same problem. it shows the boot screen but turns off after about 2 seconds. mine does not work when connected to the USB or AC power either. when i plug it in to the computer, it turns on the boot screen and just stays there. ideas?

May 29, 2008 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Sansa m250 is frozen on initializing screen


my e200 does that im sooo pissed it just stays on the screen turns blue than goes back to home screen. i let the batteries run out and the same thing still happens!!

Nov 21, 2007 | Audio Players & Recorders

Not finding what you are looking for?
RCA OPAL M4001 MP3 Player Logo

Related Topics:

961 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...