Question about Actiontec (GT704WG) Router

1 Answer

Dns of globe broadband

What shall I do to know the DNS server of my modem, when the IP properties were obtained an IP address automatically and also the DNS server address automatically?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Locally (in your network) to gather these information, you can enter http ://192.168.0.1/ to get the Actiontec’s web interface and gather the DNS info.

Alternately, for Globelines (Philippines) DNS Servers, you can try:

  • 202.52.163.6
  • 202.52.163.7
  • 202.52.162.39 (ns1.globeidc.com.ph)
  • 202.52.162.40 (ns1.globeidc.com.ph)
  • 202.52.167.70
  • 202.52.167.71
Depending on the time of the day, below DNS varies in performance/speed:
  • 203.127.225.10 (g-net.globe.com.ph)
  • 203.127.225.11 (g-net1.globe.com.ph)
In some instances, the following also work:
  • 202.95.226.66
  • 202.95.226.77
The below DNS could also be used but would seem to be reserved for somebody way up the company:
  • 203.177.3.100 (theboss.globenet.com.ph)
Hope that this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The globe light is blinking. We can connect to Belkin but page not found comes up. The message that comes up says IP address does not match. We have 3 laptops, and none of them are allowing us to have...


  • Connect your computer directly to your cable or DSL modem. If you see a log-in screen for your Internet Service Provider, make a note of the user name and password.

  • Unplug your router and your cable or DSL modem.
  • Plug your modem to your Belkin router's "WAN" port. Connect your computer to one of your Belkin router's numbered ports.
  • Turn on in your modem and wait 10 seconds. Plug in your router and restart your computer.
  • Select "Start," then "Control Panel" and then "Network Connections." Right-click "Local Area Connection" to bring up your network connection properties.
  • Click "Internet Protocol (TCP/IP)," then "Obtain an IP Address Automatically" and then "Obtain DNS Server Addresses Automatically."
  • Open your web browser. If you are prompted for a user name and password, enter the information you recorded in Step 1



  • Dec 29, 2010 | Belkin F5D8236-4 Router

    1 Answer

    How do I configure my laptops IP address to my router to get online? I'm using windows vista. I tried a few times and I can't find the window to type in the laptops IP address. How?


    Follow the following steps to change your TCP and IP Settings on Windows Vista

    1. Go to the Control Panel from the Start menu.
    2. Click "Network and Internet" and then "Network and Sharing Center."
    3. Click "Manage network connections."
    4. Choose which Internet connection you would like to change if you have more than one. Right click on it and select "Properties."
    5. Click the "Networking" tab.
    6. Choose Internet Protocol Version 4 (TCP/IPv4)
    (Note that "Obtain an IP Address Automatically" works fine generally)
    7. Click "Use the following IP Address" to enter your own IP settings.
    - Enter IP address (eg. 192.168.1.125) into the box marked "IP Address, press tab "Subnet Mask" would appear automatically (255.255.255.0) and in "Default gateway." type 192.168.0.1.

    To specify DNS server address settings, do one of the following:

    - To obtain a DNS server address automatically, click Obtain DNS server address automatically, and then click OK.
    - To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.(which can be obtained from your internet service provider (ISP).

    For visual help, check out step by step guide here
    Hopr it Helps!
    CreativeTECH

    Nov 25, 2010 | Linksys Wireless-G Broadband Router

    1 Answer

    Why does the facebook could not be open?


    Hi,

    This problem can occur if there is a mismatch between the configured IP addresses in the Advanced IP Addressing dialog box and those listed in the Server Properties dialog box for the DNS server. This problem can also occur if the TCP/IP protocol is not bound to the network adapter.

    User Action:

    Verify that the TCP/IP addresses configured in the Advanced IP Addressing dialog box match those configured in the Server Properties dialog box in DNS Manager: 1. Open Control Panel, and double-click Network. 2. Click the Protocols tab, and click TCP/IP Protocol in the Network Protocols list. 3. Click Properties, and click Advanced. Match the IP addresses to those displayed on the Interfaces tab of the Server Properties dialog box in DNS Manager: 1. In DNS Manager, right-click the DNS server name, then click Properties. 2. Click the Interfaces tab, and compare the IP addresses with those from the Advanced IP Addressing dialog box. 3. Repeat steps 1 and 2 for all DNS servers configured in DNS Manager. If there are no IP addresses configured in the Advanced IP Addressing or on the Interfaces tab of the Server Properties dialog box, enter the IP address of your network adapter. Use the ipconfig -all command at the command prompt to obtain your IP address. Check the binding of the TCP/IP protocol to the network adapter: 1. Open Control Panel, and double-click Network. 2. Click the Bindings tab. 3. Verify that the bindings for all protocols to network adapters are enabled, and that no broken connections exist in the stack.


    Please post your feedback and Vote if the problem resolved as per your satisfaction.

    Sep 25, 2010 | Routers

    1 Answer

    My Asus Eee net book is stating that it has "Limited or no connectivity" even when the ethernet cable is plugged in. I changed out cables thinking it was it. My other computer works just fine on the...


    Assuming that you have Windows XP, let's check some settings for the network connections. Click on start - settings - control panel - network connections. First we'll check the ethernet connection. Right click on local area connection - properties - choose Internet protocol (TCP/IP) - properties. In case of not at automatically settings click on both buttons to "obtain an IP address automatically" and "obtain DNS server address automatically". Click on OK at both windows. Now we will chect the Wi-fi connection. Right click on Wireless connection - properties - choose Internet protocol (TCP/IP) - properties. In case of not at automatically settings click on both buttons to "obtain an IP address automatically" and "obtain DNS server address automatically".
    Click on OK at both windows and check for the results.

    In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
    If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

    Thanks and regards
    Please kindly rate this solution
    Stelios
    direct FixYa link: http://www.fixya.com/users/technical114

    Sep 18, 2010 | Routers

    1 Answer

    Laptop connected with DSL, but can't open webpage


    Click Start > Control panel > Network Connection > Double Click Local Area Connection > Select Internet Protocol > Click Properties > MSelect Obtain IP address automatically and Obtain DNS server address Automatically > OK
    Please tell me if i worked

    Feb 24, 2009 | Zyxel P660HW-D1 Router

    1 Answer

    Internet access not working on desktop thru Netgear WGR614 router


    Make sure your desktop doesn't have static IP address. Go to Network Connections, Properties of Local Area Connection, Internet Protocol > Properties. Select Obtain IP Address Automatically and Obtain DNS Servers Automatically. Apply the changes and restart the computer.

    Jan 18, 2009 | NetGear WGR614 Wireless Router

    2 Answers

    The setting on my laptop for the linksys do not match the requirements of the linksys


    Make sure it does;

    If Automatic Configuration DHCP is enabled on the router your PC wireless or ethernet TCP/IP properties should also be set to "Obtain TCP/IP address automatically" and "Obtain DNS server address automatically".

    If your security is set to WEP your PC wireless network or ethernet connection properties should also to be set to the same authentication type.

    Jan 18, 2009 | Arris Wireless G Broadband Router (wr850g)

    1 Answer

    Settings on my laptop 4 d network dont match requirement d ntwork


    Make sure they match.

    Check your Network Connection Properties especially your TCP/IP properties. If set for automatic configuration set it to DHCP and make sure on your properties that theres no static IP address and that "Obtain TCP/IP address automatically" and "Obtain DNS server address automatically" is also check.

    Make sure Authentication type is also the same.

    Jan 18, 2009 | Arris Wireless G Broadband Router (wr850g)

    1 Answer

    Linksys WRT54G wireless connection problems.


    click on Start -> Control Panel -> Network Connections -> Wireless Network Connections -> Properties -> In the box in the middle scroll to and click on "Internet Protocol (TCP/IP)" -> Click Properties -> Make sure "Obtain an IP Address Automaticaly" is Ticked -> make sure "obtain dns address automatically" is Ticked. -> ok -> click ok

    See if you can connect

    Click on Start -> Run -> Type CMD and hit enter.
    a command box will open. type in IPCONFIG/ALL

    Please copy down the following numbers ---
    IP Address
    Subnet Mask
    Default Gateway
    DNS Servers

    Please make sure you copy them correctly and post them here.



    Dec 24, 2008 | Linksys Wireless-G Broadband Router

    1 Answer

    Icon shows connected but cannot surf net and receive emails


    try this, turn off your pc then shut down your router then shut down the modem after 5 minutes restart the modem after all the lights are lit turn on the router after all those lights are lit start you pc, then go to my network icon and view network connections, then click on the properties tab high light the tc ip line and hit the properties tab click Obtain IP address automatically and the same for Obtain DNS server automatically. In the advanced tab in the IP address box have DHCP Enabled and check the box Automatic metric, in the DNS tab check Append primary and connection specific DNS suffixes and check the box to Append parent suffixes of the primary DNS suffix, at the bottom check the box Register this connection's address in DNS. In the WINS tab check the box Enable LMHOST lookup and click the Default in NetBIOS setting. Now having done this click OK and OK again then click the close tab for the properties window and then reboot your computer, you should be able to surf the net with out any problems.

    Sep 10, 2008 | NetGear WGR614 Wireless Router

    Not finding what you are looking for?
    Actiontec (GT704WG) Router Logo

    Related Topics:

    12,741 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Actiontec Routers Experts

    Richard Schabler

    Level 2 Expert

    108 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18299 Answers

    Are you an Actiontec Router Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...