Question about D-Link DI 514 Wireless Router (DI-514)

3 Answers

I can't access my router

I have a problem with my router, i can't access it using the URL with 192.168.1.1. I have been able to access it from the time it was intalled 5 days ago but i can't access it now.Please help coz i need to add some filter addresses to it

Posted by on

  • Thomas Stout Oct 24, 2008

    Cannot connect to my D-Link router DI-514 using internal IP http://192.168.1.1.  Need to check settings.  Router is working otherwise.   Connecting fine to internet urls.  wireless function working.  just cannot connect to internal IP.  Have tried connecting with Safari and Firefox. Help.



    MacBookPro, OSX 10.5.5



×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Resetting router took care of problem. Should have done that before I posted. All is right again.

Posted on Oct 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,250 Answers

There is a reset option on your d link router use it to reset it

Posted on Oct 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Ok you can use the cable to connect to the router if your not connecting through your wireless that will tell you if it's the wireless or the router. if you still can;t connect then you may be on the wrong network to check this assuming you have windows operating system, go to start then run .... type cmd........a black window will pop up, in this type ipconfig /all (note: there is a space between ipconfig and the /all).
look for the wireless conection or if your wired in check the address of the lan connection, it should be ip address 192.168.1.x x being number between 2 and 253.
if it is then you should be able to ping the rounter with the command...... ping 192.168.1.1
if you get sent 4 received 4 then it's communicating with the router and should be able to open the browser and type in the address 192.168.1.1
and get the router up.
if the address in the lan if using wired into router or wireless if not wired in then go to connections, right click the network be it lan or wireless and go to properties, click on tcp/ip and click the ok button.
then click in use the following ip address......and type in 192.168.1.32.....and in the mask type 255.255.255.0.......leave the dns as auto and click ok then ok the other box, then on the connections page right click on the lan or wireless that your using and choose repair.
hope this helps if not get back to me.

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the 4-8 diget number in linksys wrt54g


The default IP address for the router is 192.168.1.1. If the router IP number was changed, then it will have to be reset to the default to access it. You can access the router from your computer using the URL: http://192.168.1.1 (the default IP number).

Apr 03, 2014 | Linksys Wireless-G WRT54G Router

1 Answer

How do block facebook port


Try using the parental control tools on your router to block it. As FB uses https:// the connection is encrypted, The router cannot see the URL accessed. Don't block https:// in general as you will not be able to access sites that uses a secure connection, ie Amazon, your bank, etc

Oct 25, 2013 | TP-LINK TL-WR941ND Wireless N Router -...

1 Answer

Unblock facebook


This is normally on your router page settings. Access your router's management page using your computer browser. Then under Access Restrictions tab, check category Website Blocking by URL Address
Facebook shouldn't be in the list then save the settings.

Oct 21, 2013 | Linksys Routers

1 Answer

I forgot my securiy code phone?


is it phone password or router password. do you mean wep or wpa passwork? you can access these security key by accessing your GUI in you router. just open your internet browser and type in in the url 192.168.1.1 for "linksys" router or 192.168.0.1 for other router. then go wireless and wireless security. you can find there if your are using wep or wpa access key.
In case that you dont know the password of your router. reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router. On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."

Apr 09, 2011 | Routers

1 Answer

How to unblock the forbidden url facebook


Using your browser, type in the address box the address of the router. The usual address is 192.168.1.1. This will open the maintenance page of the router. Depending on the brand and the model of the router, locate for a menu indicating Access of Filter. You should see or locate a part that indicates URL BLOCKINg. There are 2 ways to unblock a site. First is to DISABLE the URL Blocking by clicking on the necessary check box of option box. Second is to delete the name of the site in the list of sites being blocked.
Good luck.

TedMac

Sep 16, 2010 | Routers

1 Answer

I can't access my router through the URL.


Linksys will not allow you to access admin on your router on a wireless adaptor by default. You will have to enable it or use a wired connection.

Is file sharing enabled on the computer you are trying to get the media files from?

Aug 21, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

I can't access my router through the URL.


If your computer is connected to your dlink network you should be able to access.check the ip address on the computer.if correct ip address optimized browser by deleting cookies and temp files.Also try downloading firefox

Aug 19, 2008 | Routers

2 Answers

I can't access my router through the URL.


If you are using Internet Explorer, try Firefox.

Jul 18, 2008 | NetGear WGT624 Wireless Router

Not finding what you are looking for?
D-Link DI 514 Wireless Router (DI-514) Logo

Related Topics:

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...