Question about Acer PD113 Multimedia Projector
The projector turns on but gets stuck on the main white screen at startup, it doesnt accept any commands from the remote or any commands directly by pressing the power button on the projector. So only way to turn it off is to unplug it. Help..... THanx
SOURCE: acer PD113 DLP Projector
If you can work an the micro level of troubleshooting, have access to the the necessary instrumentation and tools, have the proper surface mount soldering station, test jigs, and also be able to have the access to the factory diagnostics software, and required replacement parts, then I would say you can troubleshoot and service this module. The factory service centers replaces this module. They don't spend the time and cost to service it at the component level. I have serviced some types of projection screen systems. They are very complex, and are normally serviced at the modular level. After replacement of some types of modules, some factory adjustments are required to match the new module, or parts. In the end you will have to send the unit out for factory service.
Posted on Feb 02, 2006
Read some Acer manual and it says:
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
• Press "Play" to change the "Administrator Password".
• The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
• An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
• If losing this security card and number, please contact with an
Acer service center.
Posted on Jan 29, 2010
dsv0817 picture ok then hum sound comes up and picture then, gos into black @white source button pictur ok, but dos not last it sounds like aloss of a signal but still with a picture, dos the same with a video
Posted on Dec 05, 2010
acer pd100d does not receive signal from pc or laptop, changed cables too. only shows white screen with acer logo and no signal, worked until yesterday, buttons dont respond and cannot reset the unit to factory defaults. please help
Posted on Dec 14, 2010
Tips for a great answer:
Sep 01, 2014 | Multimedia Projectors
Sep 07, 2013 | Acer X1261 DLP PROJ SXGA 37001 Multimedia...
May 17, 2011 | Acer PD113 Multimedia Projector
Oct 19, 2010 | Acer PD113 Multimedia Projector
Dec 24, 2009 | Acer PD100 Multimedia Projector
Dec 06, 2007 | Acer PH110 Multimedia Projector
Jan 24, 2006 | Acer PD113 Multimedia Projector
56 people viewed this question
Usually answered in minutes!